View Full Version : kick question

11-24-2004, 12:01 AM
i didn't know if this should go in box or speakers...so if it needs to be moved...
i am not getting that much midbass out of my kicks as i expected, is there anyway to improve this without buying diff speakers?

11-24-2004, 12:14 AM
Did you cross them over at the right slope?

11-24-2004, 12:23 AM
70Hz w/ capacitor

11-24-2004, 01:46 AM

11-25-2004, 12:56 AM

11-25-2004, 12:44 PM
last time...to the top, someone help me

11-26-2004, 01:10 AM
What speakers/how much power?

You can try adding polyfill, or try drilling a hole somewhere in the enclosure, but if you want a significant increase you'll have to change something equipment-wise.

11-26-2004, 01:16 AM
in most cases you can only do so much to improve the sound to the way you want it, after a certain point you just have to make a physical change to what your running. i see in your sig your running the cl-6x. now i dont know exactly what they are but and the only ones ive had experience with are the 61a's which were alright but i wanted more. imo your unfortunatly gonna have to change your speaks

11-26-2004, 03:21 AM
stuff I've heard:
1. reverse polarity of one mid
2. drill a hole at bottom to allow it to vent into the carpet
3. make an actual port
4. the use of polyfil
5. low pass the sub around 90hz... :)

11-26-2004, 08:26 AM
ill have to measure....

11-26-2004, 01:07 PM
Drone cones? IDK, some ultra cheap 3" speakers put in the same box, not hooked up. PR system, ya know.