View Full Version : Piecing together my own 4 in CDT component set

11-07-2004, 07:01 PM
Could i take a pair of Cl-4 (4 ohms), a pair of satnet 560 crossovers, and the tw25 tweeter kit and put together my own 4 ohm compenent set or will bet a lower resistance? If this works i think it will be cheaper than the actual cdt cl-41 component set and with better equipment. Thanks.

11-07-2004, 07:21 PM
... just get a real set

11-07-2004, 10:07 PM
i'm pretty sure the 560 and tw-25 are designed for each other. however, i'm not too sure about the cl-4. i know the 560 x-over has a setting for either a 5.25 or 6.5 woofer. as long as the ohm ratings are the same, you should be fine.