PDA

View Full Version : box builders please help



Professor Fate
10-23-2004, 06:00 PM
I can't do the math, Please help/ I need a ported box for my 15 cerwin vega stroker. the total volume including 2 ports and driver has to be 5.28ft^3. and it can't be more than 16 and 1 half inch tall. the 2 ports have to be 6in diameter by 23.13 in long. Can someone help me with some dimensions? I have some numbers but I wanted to see what you came up with, as I am terrible at this. :verymad:
Thank you. :p:

mrray13
10-23-2004, 07:13 PM
try 16.5tall x 24wide x 34 deep



will that fit? and that is assuming 3/4 wood, no bracing...







wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee eeee :peace:

Professor Fate
10-23-2004, 07:35 PM
is that going to make the inside box volume 5.28ft?

Professor Fate
10-23-2004, 07:43 PM
I believe that totall comes out to 7.755ft^3. I need 5.28ft^3 and enough room for two 6in ports. keep in mind the ports have to be 23.13in long.

Professor Fate
10-23-2004, 08:12 PM
I figured it out. thank you. Don't bother posting. :handclap:

mrray13
10-24-2004, 01:02 AM
is that going to make the inside box volume 5.28ft?

after port and sub displacement, yes :toast:



I believe that totall comes out to 7.755ft^3. I need 5.28ft^3 and enough room for two 6in ports. keep in mind the ports have to be 23.13in long.

7.79ft^3 gross volume. not including wood thickness, port and sub displacent...u know, the outside of the box :waycrazy:



I figured it out. thank you. Don't bother posting.

oops...too late...hehe













wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ee :peace: