PDA

View Full Version : Sealed Box for 12 XXX



BryanGsu
10-13-2004, 01:16 AM
anyone constructed one? anyone want to design one will be running about 1000 rms. Really no size restriction, just need excellent bracing. Would like to use 2" front baffle using HDF all the way around. Reaudio specifies a very small box, but would like to use a little box to help out with efficeny. Any help is appreciated.

spr_f150
10-13-2004, 03:07 PM
Same question here. ttt

InhumanAcura
10-13-2004, 05:06 PM
I built a 1.3^3 sealed box for someone one this forum. Threw some 45's in the corners to compensate for the volume. He's very happy with it.
Id go ported.

BryanGsu
10-13-2004, 05:14 PM
Would it be best to just use the specs. off there website?

InhumanAcura
10-13-2004, 05:25 PM
Would it be best to just use the specs. off there website?

Its a real good starting point. 1 4x8 sheet will yield a couple small sealed boxes if you want to experiment..

BryanGsu
10-13-2004, 10:15 PM
How does the RE XXX like ported enc.? What program could i use to build the (optimum) best box for this driver? Ported or sealed.

italianlifter17
10-13-2004, 10:25 PM
def go ported!!!!

OLD_SCHOOL
10-13-2004, 10:33 PM
if space is no issue why not 4 cubes ported ?

BryanGsu
10-13-2004, 11:08 PM
What fq should i port the box @ 4 cubes?

italianlifter17
10-13-2004, 11:09 PM
28-30