PDA

View Full Version : Problem with Kenwood KDC-8011



Izzy115383
09-15-2004, 01:36 PM
Recently i got in my car and my Kenwood did its little flip the face over thing it usually does as a part of the MASK feature, and it played music from the radio station it was set to. However the face does not display anything and none of the buttons work. Basically im thinking the connection to the face is broken and i do not know what to do about it.

I thought maybe someone else would have had experience with this so im looking for guidance on how to address this problem without spending much if any money.

I hit the reset button and ive disconnected power in hopes that that fizes it, i also checked the fuse and wiring on the outside of the unit. the problem has to be on the inside is what ive gathered.

Thanks for any help!
-Dan

VOA_NIGHTMARE
09-16-2004, 12:54 PM
Hi, I have a x711 similar to yours,I have never had this problem but from past readings on some h/u's like these. I have found some of them have a little cable that breaks when it gets flips. So open it up and soder it back on. I havent had this problem with mine, but I read that so I am not %100 sure though. GL