PDA

View Full Version : To those of you with CL 6x's



Chris02NeonSXT
08-25-2004, 06:25 PM
I need to know the mounting diameter. Can any of you help me out?

Thanks,
Chris

imready77
08-25-2004, 06:26 PM
2.25in or less I can't remember exactly.

Chris02NeonSXT
08-25-2004, 06:33 PM
Diameter not depth :)

EFFENDI
08-25-2004, 06:35 PM
it is a 6.5" co-axial speaker, so the diameter would be 6.5"

squeak9798
08-25-2004, 06:52 PM
it is a 6.5" co-axial speaker, so the diameter would be 6.5"

Not always. Some are oversized. For example, my buddies DEI Viper comp set lists the mids at 6.5", but they are really 7" (oustide diameter) or a little bigger.

Chris02NeonSXT
08-25-2004, 06:56 PM
Ok. I need the mounting diameter. Not the outside diameter or the depth. I need to know how big to make the whole for the speakers to fit into in the brackets I'm making.

EFFENDI
08-25-2004, 06:59 PM
usually it is a 5.75" cutout..

or try this...
http://cdtaudio.com/feedback.htm

squeak9798
08-25-2004, 06:59 PM
Stupid idea:


CALL CDT


I promise they'll be able to tell you ;)

EFFENDI
08-25-2004, 07:03 PM
Ok. I need the mounting diameter. Not the outside diameter or the depth. I need to know how big to make the whole for the speakers to fit into in the brackets I'm making.
that, my friend is called "cutout diameter"

knowing the terminology makes getting answers incredibly easy...

Chris02NeonSXT
08-25-2004, 07:18 PM
it is a 6.5" co-axial speaker, so the diameter would be 6.5"

Based on that lovely logic, Adire has been lying to you, your 15 inch sub is actually 15.5 inches in diameter. It's mind boggling isn't it.


that, my friend is called "cutout diameter"

knowing the terminology makes getting answers incredibly easy...

I'm not sure what rock you live under, but I've seen it referred to as mounting hole, mounting diameter, and cutout diameter. Get out, and live a little buddy.

Rudeness is not an excuse for ignorance.

imready77
08-26-2004, 02:29 PM
Diameter not depth :)
:wowflash: :rotflol: well that's what happens when you don't read the whole post.

Puggsley456
08-26-2004, 09:49 PM
CL-6x's:
Frame Diameter O.D 6 1/2"
Mouinting depth 2 1/4"
Mounting Hole 5 11/16"


As per the spec sheet they sent me!

Chris02NeonSXT
08-27-2004, 01:21 AM
thank you.