View Full Version : Help with alarm wiring diagram

08-22-2004, 01:45 PM
Hey, i just bought this pretty cheap alarm off ebay.. and the wiring diagram that came with it is pretty iffy to me because i have no experiance with these alarms at all... if anyone could tell me what the different wires do on the diagram and generally where they go i will be GREATLY appreciative...

BTW, i drive a 1992 240sx

if you can't read it let me know and i'll shoot you an e-mail with the big one

08-22-2004, 03:00 PM
first of all, you need a wiring diagram for your car, look for one at www.the12volt.com (http://www.the12volt.com)

08-22-2004, 03:17 PM
i cant see it...
its pretty straight forward, except for the ch1-4 i think those are channels wut for iono..

1991-92 Nissan 240 SX Security Information
Constant 12V+ White Ignition Switch Harness
Starter Black/White Ignition Switch Harness
Ignition Black/Red Ignition Switch Harness
Ignition 2 Black/Yellow (cold start Wire)
Accessory Blue Ignition Switch Harness
Tach Yellow/Red ECM in Passenger's Kick Panel
Brake Switch Red/Green Brake Switch
Trunk Pin Red (-) Light in Trunk
Parking Lights Red/Blue Light Switch or Back of Dimmer
Head Lamp Green/Yellow L And Green/Blue R at Steering Column
Hood Pin n/a
Factory Disarm n/a
Door Trigger Red/White (-) Courtesy Light
Door Lock Orange/Black Driver's Kick Panel
Door Unlock Orange/Black One Wire Door Lock System
Horn Wire Green/White (-) Steering Column