PDA

View Full Version : Help!!! With Alarm



Sn0rKy
08-20-2004, 11:21 PM
ok.. well i started puttin the alarm in today, n i ran into these problems
i cant find the ignition wire, i have the ignition harness( Blue - Ignition harness ) but theres no blue wire but i have everywire except that on the harness
then
i cant find the tach which is suppose to plugged in for remote start.(it says At coil on engine, but wuts it look like?anybody have a picture of it?)
n i cant find the light switch harness, for the head lights n the dome n stuff

HELP PLEASE, i need to get back to it tommorow
THANKS!!!!!!!!!!

oh ya its a 1995 ford aspire

Slody4Futbol
08-21-2004, 01:38 AM
look under the dash for the harness that comes from your switch that you turn your parking lights and headlights on with... if you have a dimmer switch somewhere you can usually find the parking lights wire there...

the coil is your ignition coil... the thing where all your spark plug wires go to... there should be a darkgreen/yellow wire on there...

also there is a black/red wire in the ignition harness that should be an ignition wire... see if you see that wire

Sn0rKy
08-21-2004, 06:55 PM
i figured it out... i mixed the ignition harness with the light switch harness, deR!!!
its all done now :-D

n the tach, i have to tach some of the tape off to see the wire.. thats why i didnt see it