PDA

View Full Version : Clifford RSIII wiring with a VARAD LED



burnurass
07-23-2004, 12:55 PM
Hey guys, got a question for the installers or anyone that is familiar with this. I have a Clifford Matrix RSIII Alarm in my 98 Honda Prelude. Which wire do I tap for this LED? The instructions say I need to hit the "alarm system accessory output or ground output. (activates scanner when grounded)." It says not to tap the LED output as it is too weak. Thanks for all the help! The scanner looks like this one:
http://www.thezeb.com/detail.aspx?ID=5667

Thansk again

6spdcoupe
07-23-2004, 02:48 PM
The ground when armed wire is the orange one going to the relay sattelite. Diode isolate prior to adding the scanner.

--Don