PDA

View Full Version : ported box



BayAreaNB
06-28-2004, 07:07 PM
...for a re se 12"

DBfan helped me hammer this out, but i wanted to see what the rest of you thought before i begin construction.

using 3/4 MDF

external = 18H x 26W x 14D
internal = 16.5H x 24.5W x 12.5D

Port is 22.14", 16.5H x 2W - 33sq. in. of port


Total usable is 2.924^3

Moe Lester
06-28-2004, 07:29 PM
I dont feel like checkin the measurements and stuff, but as long as its all correct, that thing will be awesome. Whats it tuned to?

BayAreaNB
06-28-2004, 08:05 PM
34 hz ten characters.

BayAreaNB
06-29-2004, 06:24 PM
anyone else?

Trixter
07-01-2004, 08:34 PM
Ok, you have:

internal = 16.5H x 24.5W x 12.5D
Port is 22.14", 16.5H x 2W - 33sq. in. of port

gives you 2.92cu'

the port takes up.

(22.14 -.75 (subtract .75 for front of box)) x 16.5 x (2 + .75 (add .75 for inner port wall)) / 1728 = .56

2.92 - .56 = 2.36cu' usable space...and you still need sub displacement.

To tune this box (w/o sub displacement) to 34Hz that port would only need to be 3.6" long.

DBfan187
07-01-2004, 08:38 PM
Ok, you have:

internal = 16.5H x 24.5W x 12.5D
Port is 22.14", 16.5H x 2W - 33sq. in. of port

gives you 2.92cu'

the port takes up.

(22.14 -.75 (subtract .75 for front of box)) x 16.5 x (2 + .75 (add .75 for inner port wall)) / 1728 = .56

2.92 - .56 = 2.36cu' usable space...and you still need sub displacement.

To tune this box (w/o sub displacement) to 34Hz that port would only need to be 4.3" long.
I see that's the last time I try to help someone. Smart people kill me!:(

Trixter
07-01-2004, 08:42 PM
don't worry...you'll get there....

It wouldn't have been so bad if he didn't call you out in his post...lol

pj_chevy03
07-01-2004, 11:32 PM
dbfan, i aint bashin or nothin but if ya dont know what your talkin about plz dont give some1 advice...i was about to build the box to the specs u gave.......glad i didnt.....again i aint bashin cuz i know i dont know **** about tuning

DBfan187
07-01-2004, 11:35 PM
dbfan, i aint bashin or nothin but if ya dont know what your talkin about plz dont give some1 advice...i was about to build the box to the specs u gave.......glad i didnt.....again i aint bashin cuz i know i dont know **** about tuning
Fine, but I was just giving you the data that WinISD was giving me.

You asked, I replied. You don't like it, go somewhere else.

pj_chevy03
07-02-2004, 12:07 AM
You don't like it, go somewhere else.
nah i'll jus ask someone else :thumbsup