PDA

View Full Version : Greetings from CherryMan Customs



CheЯRyMan
08-16-2014, 11:46 AM
Ive been building sub enclosures since 1982. Joined the USAF in 1985. Graduated State Tech. in Memphis with a degree in Mechanical Engineering. Worked at BICC cables as a quality control engineer testing wire
and fiber optics I have extensive knowledge in wire,cabling and fiber optics. My hobbies since I was in high school were woodworking. Ive had a Cabinet shop since 2010 building furniture and sub enclosures. I now operate a full time professional
Sub box Cabinet shop with CnC capabilities. I specialize in CnC carved Lexan glass Led enclosures.
So check out my website cherrymancustoms.com for my work and build video's.

timhof13
08-16-2014, 11:56 AM
Cherryman, nice work! What kinda pricing on the cnc lexan or plexi.

CheЯRyMan
08-16-2014, 12:07 PM
Most of my carved enclosures cost 250.00 most carved windowed lighted enclosures are 450.00. This enclosure was 575.00 and includes 2 different sets of dynamic Led's. One for the basketball court and one for the sub glass windows. I never use plexiglass its weak Lexan is 10 times stronger than plex and will not crack or stress. See the build video here https://www.youtube.com/watch?v=G1yA28A9byM many more of my builds on my youtube channel. Thanks

MrFoca
08-16-2014, 01:00 PM
Nice looking builds buddy. What thickness you usually use for installs ?

CheЯRyMan
08-16-2014, 01:19 PM
.75, 1 and 1.5 mdf Im also talking with a vendor to use colored MDF (which is expensive 100.00 a sheet)

big scott
08-16-2014, 01:23 PM
look into doing birch plywood. better then mdf and looks nicer.

CheЯRyMan
08-16-2014, 01:32 PM
Yes Ive used birch many times when customers request it, but it chips and over time the edges start to peel/separate, it sands unevenly due to the ply base but the main reason I personally dont use it you cant carve into the material since its a ply. Doublewalled Birch Box here https://www.youtube.com/watch?v=-Rdl9ZvpVb4

MrFoca
08-16-2014, 01:45 PM
I was talking about the lexan, sorry should have said that. You ever use MGP on any boxes.

CSCStang
08-16-2014, 01:53 PM
Nice chit brotha!

CheЯRyMan
08-16-2014, 01:58 PM
In 2 years of using .25 Lexan Ive never had failure.

MrFoca
08-16-2014, 02:01 PM
In 2 years of using .25 Lexan Ive never had failure.

Really. That thickness is that strong. Wow. I would of thought .375 or higher

CheЯRyMan
08-16-2014, 02:14 PM
The key is keep large sizes supported small sizes hold up just fine always use fasteners 1" to 1.5" apart and don't drill near the edge. General rule I use hole must be at least a inch away from the edge. The double walled Birch box build customer requested .5 lexan and a 12" x 6" piece was 60.00 at my cost.

Umbra
08-16-2014, 02:25 PM
Gorgeous work!

We could always use another builder here; there aren't too many active.

CheЯRyMan
08-16-2014, 02:45 PM
Thank you you'll find Im very accessible and I offer services most do not.

Text msg build updates
I offer individual carved pieces for other builders to incorporate into their projects
I work exclusively one on one with the customer to get their project perfect.
All enclosures are built with cabinet makers techniques NO BRADS EVER, pocket holes,dowels and wood clamps for a clean look my joinery is always on display

CheЯRyMan
08-17-2014, 11:02 AM
Thanks again for all the support looking forward to working on your projects........Look for my forum soon

Popwarhomie
08-17-2014, 11:25 AM
$550 box and kicker comps... :wow:

Nice work though man. :cool: