PDA

View Full Version : Ultimate Sub F/S Thread



72Impala
04-27-2014, 05:17 PM
Item(s) for Sale:

1. Products:

1(((SOLD))). NEW Never used Dual 1.4 ohm 24" Tantric SHD top assembly on a Redstar NEO UFO4 motor.

2. Used DD9515Z Dual 1.5 ohm with full carbon fiber cone and dustcap

3. 2 X Dual 2 ohm used 15" RE MT's

4. 15" Dual 1.4 ohm Frankenwoofer (made by me)

5. TC Sounds 2" Prototype Coils

2. Specs:

1. SHD/UFO4 -
24" diameter, 5K+ RMS, D1.4, direct leads, Uses two adapters to fit the basket onto the motor. 8 Layer Flatwound Aluminum coil (its a big coil)

2. DD9515Z -
15" diameter, 2K (lol, takes a lot more), 95Z motor uses multiple small neo "chunks" pretty much, all inside of the outer pillars. Has full carbon fiber cone and cap, direct leads. (I believe these are copper coils)

3. RE MT's -
15" Diameter each, No said RMS but everyone knows they handle a lot. They are D2 but each coil reads 2.3-2.4 ohms. These ones have quad spiders. 8 layer flatwound aluminum coil

4. Frankenwoofer -
15" HX2 basket, Hard cone with Med-high roll surround, CF dust cap, dual sewn leads, D1.4 ohm 4 layer Flatwound aluminum coil, Old school hifonics ASX motor. Coil is rated for 1600WRMS

5. TC Prototype 2" Coils -
SVC 3 ohm LMT/LMS Coils, if you know what they are then your interested haha, if you don't know what they are then you are like "who cares about 2" coils?"


3. Descriptions/Condition of all items:

1. SHD/Redstar -
New top assembly 10/10, motor was used previously, 9/10. woofer works 10/10.

2. DD9515Z -
Probably 7/10, has scuffs on surround, some stuff on the motor that just needs to be cleaned with some degreaser, other than that its good.

3. RE MT's -
8.5-9/10 mostly because they are used and have a few scratches on the bottom from sitting on things. One has some sharpie markings on the cone that I think came from the factory, you can't really see them unless you try to, its black sharpie on a black cone.

4. Frankenwoofer -
9.5/10 because I put it in a box to test it and make sure it worked properly, so has had screws in it. It has no coil rub and sounds very clean.

5. TC 2" coils -
10/10 brand new

4. Total Price: :

1. 24" SHD/Redstar - I know a new SHD is $900, but mine is $1000, because of the motor, if you think the price is high, go find one of these motors. $1000 plus shipping (two boxes)

2. DD9515Z - $800 plus shipping

3. 2 x 15" RE MT's - $700 plus shipping for both

4. Frankenwoofer - $180 plus shipping

5. TC Prototype Coils - $100 plus shipping for both

5. Pictures:

http://i768.photobucket.com/albums/xx321/evanirr/IMG_1235.jpg

http://i768.photobucket.com/albums/xx321/evanirr/IMG_1251.jpg

http://i768.photobucket.com/albums/xx321/evanirr/IMG_1250.jpg

http://i768.photobucket.com/albums/xx321/evanirr/IMG_1248.jpg

http://i768.photobucket.com/albums/xx321/evanirr/IMG_1247.jpg

http://i768.photobucket.com/albums/xx321/evanirr/IMG_1237.jpg

http://i768.photobucket.com/albums/xx321/evanirr/IMG_1244.jpg

http://i768.photobucket.com/albums/xx321/evanirr/IMG_1242.jpg

http://i768.photobucket.com/albums/xx321/evanirr/IMG_1240.jpg

Jes 42
04-27-2014, 07:35 PM
Met 72Impala ;today Good guy for sure.Glws :thumbupw:

72Impala
04-27-2014, 07:37 PM
Met 72Impala ;today Good guy for sure.Glws :thumbupw:

Thanks man! your the man jes42

Nutdawg651
04-27-2014, 07:54 PM
Whats the most you would throw on that franken woofer?

hispls
04-27-2014, 08:08 PM
Trade you a Neo sig for the DD neo.

72Impala
04-27-2014, 08:51 PM
Whats the most you would throw on that franken woofer?

1600WRMS, exactly what the coil is rated at

72Impala
04-27-2014, 08:57 PM
Trade you a Neo sig for the DD neo.

Pmed you

hispls
04-27-2014, 11:11 PM
Pmed you

And back at you. Also free bump for a great looking sub collection.

shauncox26
04-28-2014, 08:13 AM
fuggin sweet collection! wish i could afford that shd. how's it perform with that neo motor?

72Impala
04-28-2014, 08:19 AM
fuggin sweet collection! wish i could afford that shd. how's it perform with that neo motor?

All I have done is make sure there is no coil rub and what not by a very short free air test , didn't even cut the wire on the direct leads to do it. But if you look up this motor there are a few videos of it playing and it is amazing.

72Impala
04-29-2014, 05:35 PM
SHD/redstar pending

SounDrive
04-29-2014, 05:46 PM
What impedance is the 9515z? I may be interested.

72Impala
04-29-2014, 06:03 PM
What impedance is the 9515z? I may be interested.

D1.5 sir

---------- Post added at 05:03 PM ---------- Previous post was at 05:02 PM ----------


What impedance is the 9515z? I may be interested.

I could also meet you halfway if you wanted, we aren't far apart

72Impala
04-30-2014, 06:25 PM
Need 50ft of ofc, and cash

72Impala
04-30-2014, 10:43 PM
24" redstar/SHD traded off today

72Impala
05-04-2014, 03:39 PM
Still stuff here

Tmunce910
05-05-2014, 07:02 PM
Really interested in the crossfires, pm me please for pricing

72Impala
05-05-2014, 07:33 PM
^^ who said they were for sale? Lol,

Coil specs for those that care;

2.0250 ID
2.2355 OD
1.8110 WW
4.21 former height

72Impala
05-05-2014, 07:33 PM
^^ who said they were for sale? Lol,

Coil specs for those that care;

2.0250 ID
2.2355 OD
1.8110 WW
4.21 former height

Mooki
05-05-2014, 07:54 PM
Item(s) for Sale:

1. Products:

1(((SOLD))). NEW Never used Dual 1.4 ohm 24" Tantric SHD top assembly on a Redstar NEO UFO4 motor.

2. Used DD9515Z Dual 1.5 ohm with full carbon fiber cone and dustcap

3. 2 X Dual 2 ohm used 15" RE MT's

4. 15" Dual 1.4 ohm Frankenwoofer (made by me)

5. TC Sounds 2" Prototype Coils

2. Specs:

1. SHD/UFO4 -
24" diameter, 5K+ RMS, D1.4, direct leads, Uses two adapters to fit the basket onto the motor. 8 Layer Flatwound Aluminum coil (its a big coil)

2. DD9515Z -
15" diameter, 2K (lol, takes a lot more), 95Z motor uses multiple small neo "chunks" pretty much, all inside of the outer pillars. Has full carbon fiber cone and cap, direct leads. (I believe these are copper coils)

3. RE MT's -
15" Diameter each, No said RMS but everyone knows they handle a lot. They are D2 but each coil reads 2.3-2.4 ohms. These ones have quad spiders. 8 layer flatwound aluminum coil

4. Frankenwoofer -
15" HX2 basket, Hard cone with Med-high roll surround, CF dust cap, dual sewn leads, D1.4 ohm 4 layer Flatwound aluminum coil, Old school hifonics ASX motor. Coil is rated for 1600WRMS

5. TC Prototype 2" Coils -
SVC 3 ohm LMT/LMS Coils, if you know what they are then your interested haha, if you don't know what they are then you are like "who cares about 2" coils?"


3. Descriptions/Condition of all items:

1. SHD/Redstar -
New top assembly 10/10, motor was used previously, 9/10. woofer works 10/10.

2. DD9515Z -
Probably 7/10, has scuffs on surround, some stuff on the motor that just needs to be cleaned with some degreaser, other than that its good.

3. RE MT's -
8.5-9/10 mostly because they are used and have a few scratches on the bottom from sitting on things. One has some sharpie markings on the cone that I think came from the factory, you can't really see them unless you try to, its black sharpie on a black cone.

4. Frankenwoofer -
9.5/10 because I put it in a box to test it and make sure it worked properly, so has had screws in it. It has no coil rub and sounds very clean.

5. TC 2" coils -
10/10 brand new

4. Total Price: :

1. 24" SHD/Redstar - I know a new SHD is $900, but mine is $1000, because of the motor, if you think the price is high, go find one of these motors. $1000 plus shipping (two boxes)

2. DD9515Z - $800 plus shipping

3. 2 x 15" RE MT's - $700 plus shipping for both

4. Frankenwoofer - $180 plus shipping

5. TC Prototype Coils - $100 plus shipping for both

5. Pictures:

http://i768.photobucket.com/albums/xx321/evanirr/IMG_1235.jpg

http://i768.photobucket.com/albums/xx321/evanirr/IMG_1251.jpg

http://i768.photobucket.com/albums/xx321/evanirr/IMG_1250.jpg

http://i768.photobucket.com/albums/xx321/evanirr/IMG_1248.jpg

http://i768.photobucket.com/albums/xx321/evanirr/IMG_1247.jpg

http://i768.photobucket.com/albums/xx321/evanirr/IMG_1237.jpg

http://i768.photobucket.com/albums/xx321/evanirr/IMG_1244.jpg

http://i768.photobucket.com/albums/xx321/evanirr/IMG_1242.jpg

http://i768.photobucket.com/albums/xx321/evanirr/IMG_1240.jpg





Would you possibly trade the FrankenWoofer for a pair of Image Dynamics Cd1e horn bodies and one horn motor

72Impala
05-05-2014, 09:10 PM
Would you possibly trade the FrankenWoofer for a pair of Image Dynamics Cd1e horn bodies and one horn motor

Pm me with pics please

Mooki
05-05-2014, 11:06 PM
I will in the morning buddy. There like new just missing one motor they are replaceable though quite a few companies. I might be able to come up with the second motor but I doubt it I have dug through all my old stuff with no luck so far. I would of course reimburse you for shipping if we end up making a deal. Since the woofer would cost way more to ship then two fiberglass horns. These are first gen image dynamics CD1e's one of the first horns to the market originally sold msrp 1199.99$ will go to my shop tomorrow and get pics for you for sure! I also have a bunch of old kicker resolution mids and tweets I always ran the R6's with these horns.

Mooki
05-05-2014, 11:08 PM
I will in the morning buddy. There like new just missing one motor they are replaceable though quite a few companies. I might be able to come up with the second motor but I doubt it I have dug through all my old stuff with no luck so far. I would of course reimburse you for shipping if we end up making a deal. Since the woofer would cost way more to ship then two fiberglass horns. These are first gen image dynamics CD1e's one of the first horns to the market originally sold msrp 1199.99$ will go to my shop tomorrow and get pics for you for sure! I also have a bunch of old kicker resolution mids and tweets I always ran the R6's with these horns.
I don't know what a PM is sorry so stupid on the computer-ese

allauto6293
05-07-2014, 10:09 AM
I want the DD9515Z! !! Will bump for dd sub!!

psych0ticnemes1
05-07-2014, 11:00 AM
I'd love to try out a MT. Too bad they aren't dual 1s. Bump for awesome woofers.

72Impala
05-07-2014, 01:10 PM
I'd love to try out a MT. Too bad they aren't dual 1s. Bump for awesome woofers.

Eh, no big deal, just change up the amp configuration lol

psych0ticnemes1
05-07-2014, 01:45 PM
Ha, I only need one 15" for my class, needs to wire to .5 ohm. I'm sure these will sell though. They are great competition woofers.

72Impala
05-07-2014, 10:56 PM
MT's sold locally

72Impala
05-10-2014, 11:09 AM
Dd9515z gone, will be closing thread soon