View Full Version : Tweeter advice for stock dash location!
03-28-2014, 01:18 AM
I need some advice on tweeters before I make a purchase. The tweeters will be mounted in the stock dash location of my Camry firing into the windshield. I'm not into building pods or fiberglassing the a pillar just because I prefer the stock look. I currently have some MB Quarts tweeters and CANNOT Stand bright or harsh tweeters. I'm looking at the vifa xt25. Would these be a good choice based on my needs. The tweeters will be run active.
03-28-2014, 01:43 AM
if u have tweeters too bright or harsh here is this CDT Audio BSC-1 Bright Sound Compensator (http://cdtaudio.com/sep_components/tweeters/bsc1.htm) i am pretty sure it may work with other tweeters, not real sure though, maybe someone else can shed some light on that
03-28-2014, 02:44 AM
have you tried speaker grill cloth over your current tweeters? Does the xover let you attenuate them -3db? Have you played with EQ at 10Khz/12Khz?
Ring radiators are very nice and not bright at all, but I've never tried them reflecting off a windshield...
03-29-2014, 06:25 AM
Considering off axis response drops off, the xt25s probably won't sound bright at all. But if you had decent eq and level control, that'd be all you'd need to tame a lot of different tweeters
03-29-2014, 12:32 PM
I run the MB quarts active on my cz702. I have them turned all the way down. I'll try the speaker cloth idea. I ordered the vifa's just because they were so inexpensive I said, Ill give them a shot!
03-29-2014, 04:58 PM
Hope you like the vifa. I'm installing a set myself
you should be good with those vifas... in all honesty, if the tweets are bright or harsh its mroe than likely the tuning... do you have a 31band eq?
03-29-2014, 07:28 PM
I have a 5 band parametric