PDA

View Full Version : Any information appeciated



st0n3r
03-09-2014, 10:05 PM
Ok, so a friend gave me a box they used in the past, but they have no idea what its tuned to. Maybe one of you guru's can lend a hand on that. Im hoping to use it and install my other sub as currently im using 1 sub in another box.

Here is all the information i have on the box.

Also, 1 sub on each side of the port which is in the center of the box
35.75" Wide
13" tall
16" deep

port
3" wide
11.75" tall
13.50" deep on both sides


material appears to be 1/2 mdf or particle board

st0n3r
03-10-2014, 08:41 PM
anybody?

BrownVanMan
03-10-2014, 08:53 PM
is the 3 inch aero per chamber or only a single one for both subs?

st0n3r
03-10-2014, 09:29 PM
Its just 1 slot port down the center of the box.

st0n3r
03-10-2014, 09:44 PM
BrownVanMan; ^^

BrownVanMan
03-10-2014, 10:22 PM
the port doesn't turn after it gets to the back of the box?

BrownVanMan
03-10-2014, 10:25 PM
roughly 1.75 cu ft each side tuned to 40hz

st0n3r
03-10-2014, 10:46 PM
no, the port just goes straight down the center (2 boards 3" space between them and stops about 2" from the back wall.


___________________________________
| |
| | | |
| | | |
| | | |
|______________| | _____________ |

kinda hard to do it, but it resembles this lol. on each side of the port is a cutout for the sub. you think 1.75 @ 40hz is ok for 2 x 12" XFL's? It was a free box and the one im using now is ****. its 36" wide, 13" tall and 14" deep, but the port is like 1.5" wide, 12" deep and is like pathetic. the shop claimed it was ported to like 30hz for me but yea............

st0n3r
03-10-2014, 10:47 PM
ok, trying to draw it out aint working, but hopefully you get the just of it lol

st0n3r
03-11-2014, 12:01 PM
im trying to see if this box will be sufficient and do well with 2 x AB XFL 12's