PDA

View Full Version : info on box for 2 xfl 10s



j_roude89
03-07-2014, 09:37 AM
Done research and cnt find exact measurements for this style of box. Tried tores calculator with no succes. My box is double baffled center port. Box is 33in long 16in tall and 14in deep. Port is 11in deep 2 and a half in wide 12in tall. Box is tuned to 36hrtz and not successful picking up lows. All help is appreciated thanx!!!!

garychoffmann
03-07-2014, 11:19 AM
What exactly are you asking?

j_roude89
03-07-2014, 11:40 AM
If the box is too small port not right

j_roude89
03-07-2014, 11:42 AM
Picking up mids great but lows r not garbage but I kno these subs can get low

mylows10
03-07-2014, 11:43 AM
Not enough port would be my guess

shauncox26
03-07-2014, 11:50 AM
I got 5.75"x12 for adequate port area that will increase ur box size considerably to tune to the same Hz and maintain internal volume.

j_roude89
03-07-2014, 12:06 PM
Iv heard box is too small have pic on profile. A guy I kno has a bigger box 4cubes I believe and bigger port. Would that be the best bet or could I salvage box?

j_roude89
03-07-2014, 12:08 PM
Shauncox yea I bought the box already made thinkin about tunning down to around 33 hrtz good idea?

NASTY08IMPALA
03-07-2014, 01:09 PM
Use torres and play with it ..try to get 4 cubes after displacement with 16"port per cube tuned between 32-34

j_roude89
03-07-2014, 01:19 PM
Iv tried to use that calculator kinda tough for a beginner but like they say try harder

NASTY08IMPALA
03-07-2014, 01:24 PM
Iv tried to use that calculator kinda tough for a beginner but like they say try harder

Its pretty easy once u try it out ...just try to get the tuning .port area correct the rest will just be measurments u can fit..start by punching in the numbers of the box u have now then tweak the port length and width until u get the port area to around 16 per cube also watch ur tuning also as u widen the port tuning will change

j_roude89
03-07-2014, 01:26 PM
This is an *example* of the other box Custom Slot Ported MDF Enclosure Box for 2 10" Sub Woofers 4 ft 3 Tuned 32Hz | eBay (http://m.ebay.com/itm/360485924415?nav=SEARCH)

NASTY08IMPALA
03-07-2014, 01:31 PM
This is an *example* of the other box Custom Slot Ported MDF Enclosure Box for 2 10" Sub Woofers 4 ft 3 Tuned 32Hz | eBay (http://m.ebay.com/itm/360485924415?nav=SEARCH)

I wouldnt mess with any prefab boxes to be hinest ..doesnt look horrible but for that miney u can get one designed and build truely custom for those subs amd ur car ...can u or anyone u know build if they had a cut sheet?? There are guys on here who just design boxes

j_roude89
03-07-2014, 01:40 PM
No im not gettin an ebay box lol that was an example same design though made at a local shop

snyderd758
03-07-2014, 11:02 PM
Use aero ports there a space saver and make for a much easier box build.

j_roude89
03-10-2014, 07:17 PM
Bigger box and bigger port did the trick guy thanks

NASTY08IMPALA
03-10-2014, 07:19 PM
Bigger box and bigger port did the trick guy thanks

Working prettty good now?..u design and build it?

j_roude89
03-10-2014, 08:39 PM
Nah bought it. 4 cubes and ports same length I believe but instead of 2 and a half its like 3 and a half which both r huge improvements. Low bass travels forever ppl hear me like 2 minutes down the rd before I get there haha