PDA

View Full Version : New SSA Dcon almost ready...



denim
03-05-2014, 02:49 PM
Photos are done, specs and enclosure info will be up soon. Below are shots of the new Dcon 10, it is a shallow mount. It is still a great SQ option that blends really well, and can have authoritative output on modest power. The newer design has greater cooling and more motor force along with a little more power handling and enclosure flexibility than the original Dcon.

Sub Woofers - SoundSolutionsAudio - DCON - SSA STORE (http://store.soundsolutionsaudio.com/categories/sub-woofers/soundsolutionsaudio/dcon.html)

http://cdn2.bigcommerce.com/server3700/a6ac4/products/180/images/6794/DCON_10_004_2__24268.1393707935.1280.1280.jpg

http://cdn2.bigcommerce.com/server3700/a6ac4/products/180/images/6791/DCON_10_001__37655.1393707935.1280.1280.jpg

http://cdn2.bigcommerce.com/server3700/a6ac4/products/180/images/6792/DCON_10_002__71899.1393707935.1280.1280.jpg

Freeman
03-05-2014, 02:53 PM
looks śexy :naughty:

globalminds_ent
03-05-2014, 02:55 PM
Ssa has to have some of best looking subs, with performance to match, love how the motor is extended like that.

denim
03-05-2014, 02:56 PM
looks śexy :naughty:

:emb: :emb:

denim
03-05-2014, 02:58 PM
Ssa has to have some of best looking subs, with performance to match, love how the motor is extended like that.

Why thank you. ;)

St.Zu
03-05-2014, 09:37 PM
Any idea on depth?

2002XLT
04-30-2014, 10:32 PM
Have any info yet? Definitely interested.

SounDrive
04-30-2014, 10:42 PM
Have any info yet? Definitely interested.

Same here. I may have a couple of installs coming up soon that this would be perfect for. :)

denim
05-01-2014, 01:13 PM
Here are the PRE-PRODUCTION specs:

DCON10

DCR 7.8 Ohms (D4 wired in series) 3.4 (S4 coil)
FS 29.6 Hz
QMS 4.51
Qes .31
Qts .29
Mms 111g
Vas 35.0 l
SD 310 cm^2
BL 22.8 15.05 (S4 coil)
SPL 86.5 1W/1m


DCON12

DCR 7.8 Ohms (D4 wired in series) 3.4 (S4 coil)
FS 28.1 Hz
QMS 4.98
Qes .34
Qts .32
Mms 136g
Vas 78.1 l
SD 480 cm^2
BL 22.8 15.05 (S4 coil)
SPL 89.2 1W/1m


DCON15

DCR 7.8 Ohms (D4 wired in series) 3.4 (S4 coil)
FS 32.5 Hz
QMS 5.66
Qes .45
Qts .42
Mms 148g
Vas 149.2 l
SD 810 cm^2
BL 22.8 15.05 (S4 coil)
SPL 92.4 1W/1m

2002XLT
05-08-2014, 02:34 AM
Mounting depth?

denim
05-08-2014, 02:54 PM
Mounting depth?
I post them up soon, forgot to grab them in the craziness lately.

2002XLT
05-08-2014, 03:04 PM
No problem. I understand. Also if you could tell me how much sealed or ported air space they need. And what you would safely consider a daily rms range. If they will fit id like to put 2 10s in my truck. Thanks.

denim
05-09-2014, 04:56 PM
No problem. I understand. Also if you could tell me how much sealed or ported air space they need. And what you would safely consider a daily rms range. If they will fit id like to put 2 10s in my truck. Thanks.

Enclosure wise, they are not far off from a mix between the original Dcon and the Gcon. Not knowing listening habits or power, for a pair of 10's sealed, I would do around 1.5 cubes with maybe a pound or so of polyfill, and ported I would aim for 2.2 cubes tuned in the 31hz range.

Power wise, 400 is plenty. I pushed it pretty far past that, but that was more for abuse testing. So going over 500 is not really needed, 300-400 is plenty and a nice sweet spot.

2002XLT
05-10-2014, 09:59 AM
Do you think they would be ok with 1.05 sealed? That's about how much room I will have under the seats. Also I've got about 6" mounting depth to work with. Do-able?

denim
05-13-2014, 06:05 PM
Do you think they would be ok with 1.05 sealed? That's about how much room I will have under the seats. Also I've got about 6" mounting depth to work with. Do-able?

That is tight, but could work with some polyfill/acoustastuff. Is that mounting depth allowing for space in front of the cone?

2002XLT
05-14-2014, 12:10 AM
Yes. This is pretty much the enclosure I would need. I'll be having someone make it though so I can hopefully tune lower and maybe get a bit more airspace.

2007-13 & New 2014 GM CREW CAB 2-10" VENTED (http://www.foxacoustics.com/ProductDetails.asp?ProductCode=GM%2DCC%2D210%2DV%2 D07)

denim
05-14-2014, 05:13 PM
Yes. This is pretty much the enclosure I would need. I'll be having someone make it though so I can hopefully tune lower and maybe get a bit more airspace.

2007-13 & New 2014 GM CREW CAB 2-10" VENTED (http://www.foxacoustics.com/ProductDetails.asp?ProductCode=GM%2DCC%2D210%2DV%2 D07)

Ah, ok. Should be good to go, but find out about final specs of the enclosure ahead of time.

denim
05-27-2014, 03:14 PM
DCON10

DCR 7.8 Ohms (D4 wired in series) 3.4 (S4 coil)
FS 29.6 Hz
Re 7.8
QMS 4.51
Qes .31
Qts .29
Mms 111g
Xmax 17mm
Vas 35.0 l
SD 310 cm^2
BL 23.1 15.05 (S4 coil)
SPL 86.5 1W/1m
400wRMS
Displacement 0.09ft^3
sealed .75
ported 1.0 @ 31hz
mounting depth 5.375"

DCON12

DCR 7.8 Ohms (D4 wired in series) 3.4 (S4 coil)
FS 28.1 Hz
Re 7.8
QMS 4.98
Qes .34
Qts .32
Mms 136g
Xmax 17mm
Vas 78.1 l
SD 480 cm^2
BL 23.1 15.05 (S4 coil)
SPL 89.2 1W/1m
400wRMS
Displacement 0.13ft^3
sealed 1.0
ported 1.75 @ 31hz
mounting depth 6"

DCON15

DCR 7.8 Ohms (D4 wired in series) 3.4 (S4 coil)
FS 32.5 Hz
Re 7.8
QMS 5.66
Qes .45
Qts .42
Mms 148g
Xmax 17mm
Vas 149.2 l
SD 810 cm^2
BL 23.1 15.05 (S4 coil)
SPL 92.4 1W/1m
400wRMS
Displacement 0.16ft^3
Sealed 2.5
ported 3.5 @ 31hz
mounting depth 7.25"