PDA

View Full Version : Looking for a design



Darkheals
02-14-2014, 08:37 PM
Hello all somewhat new to audio did it back in the day was much easier it seemed. So please hang in with me.I really wanna get back in to it and have been reading the forum now for awhile.Well what I am looking for is a design for two 12" Triton that i can fit in the back of my 02 Neon. Ill post the specs.
re-7.6ohm
fs-34.925hz
qts-.578
qes-.650
qms-5.224
vas-1.495
sens-86.3dB SPL
mms-181.594
Mounting Depth : 162mm ( 6.4 inches)
Mounting Diameter : 280mm ( 11 inches)
2x 60 Oz motor,
3″ 4 layer copper coils

500 Watts rms

Recommended enclosure:
Sealed: 1 cubic feet
Ported: 2.2 cubic feet 33 Hz

I am thinking ported but love to hear your opn. I am not going for Comp. But id love to show it off. So any help would be great. Thank you for all your help.

Darkheals
02-27-2014, 12:29 PM
Sorry for the delay but been really busy Ok here's the trunk siZe hope it helps
33"wide 20-21"deep 17" tall
That's the space I have to work with. I know it's not much. Thank you all again