PDA

View Full Version : TEN 6" Pyle woofer ($10.99 each) serching for 145db



akadj
01-15-2014, 09:22 PM
I wanted to get the cheapest woofers I could find an make them loud, money was not an issue, the lower the quality/expectations the better. I want to make this Dodge Durango do a 145db legit sealed on the dash off 2000 watts so I can run street stock in the Db Drags.

I had a hard time choosing cheap woofers.. Theres so many junk ones out there that caught my eye!

Pyramid, Pyle, legacy, rampage, boss audio, sound storm.. How do you choose.. There's so many out there!

Then I came across these Pyle 6" dual 4 ohm "600" watt woofers and I was sold!!

They retail at $10.99 each at Walmart (USA only) and handle 600 WATT'S??.. SCORE!!!! LOL

So I tried to get them to ship to a Canadian store, they said they don't ship across the boarder. If its not sold in Canadian Walmart's I'll have to look else where. WTF?

So I had to buy them else where and pay for the shipping/taxes/import fees/duty myself.

Big thanks to BEACH AUDIO for selling me them and doing all the leg work with customs so I could get these dream woofers!!

After everything was said and done I ended up with a $350.00 bill for 10 of them.. But as I said money was not going to be an issue.

I have more amps at my disposal then most people, so I was set there.

Decided to go with a new brand we picked up and have been working closely with "Sonido Mask ZX-2000. 1"

We've had the amp on the bench and done in car testing as well, it easily does 2kw clean and has average efficiency.

So it was time to get to wood working, I had a ton of boxes going through my head but was limited with space because of the street stock rules. Ended up building a transmission line with a 5 foot long port, then decided to alter the port so it has a tapered flare/horn port over the whole 5 ft of length. The port starts at 24sq" and flares out to 100sq"

So I'm running the amp at 0.8 ohms by running 5 woofers parallel and the coils series and the same for the other 5 woofers, then parallel both together. If any one is.lost with that,... Its to many series parallel and parallel again coils to.explain.. I'll try and get a diagram made for you just pm.

I haven't put it in the truck and run it on the meter yet, letting the glue dry and I'm some what nervous LOL.. No one likes to fail!!

I could have waited till I found out if it worked and made a thread or not if I failed.. But what ever.

I still have to upgrade my power wire to 1 aught - 0 gauge.. I like to say 1 aught cuz zero gauge sounds smaller LOL.. I've got a few hundred feet left over from the metro build.

So the door bell rings and they show up at the door.. I was just waiting for these things to come!!

After opening them the first thing out of my buddy's mouth was .." Sweet Jesus, are the voice coils spun from tin foil, I bet the spider is made from pantyhose, its so weak and soft! You better be happy if you do a 135!!!" BAHAHA


Here's a few photos... For now



http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140113_091335_zpsktythbwj.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140113_091335_zpsktythbwj.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140113_091209_zpsmzi4252t.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140113_091209_zpsmzi4252t.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140113_092613_zps6aomcbpg.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140113_092613_zps6aomcbpg.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140115_144414_zpswi8qsmi4.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140115_144414_zpswi8qsmi4.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140115_144517_zps6qy7mh0e.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140115_144517_zps6qy7mh0e.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140114_143159_zps0mbp4jtw.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140114_143159_zps0mbp4jtw.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140114_150116_zpsvjzzlvol.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140114_150116_zpsvjzzlvol.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140114_145621_7_bestshot_zpswf3ae0sp.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140114_145621_7_bestshot_zpswf3ae0sp.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140114_110802_zpsdiqzj9wv.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140114_110802_zpsdiqzj9wv.jpg.html)



http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140115_145142_8_bestshot_zpsqyyku8gw.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140115_145142_8_bestshot_zpsqyyku8gw.jpg.html)

Pearson
01-15-2014, 09:30 PM
Subscribed.

Looks like it'll be a fun project.

akadj
01-15-2014, 09:37 PM
I know the box looks Huge.. But in person you see its just the little woofers lol

Box is only 3.65 cubes before all displacement.

akadj
01-15-2014, 09:41 PM
http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140115_144817_zpsdcytkjld.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140115_144817_zpsdcytkjld.jpg.html)

Lowlacs
01-15-2014, 09:52 PM
So these were the worst ever subs that u chose, did someone link u to them from ur search thread? This is great, I wish u luck in reaching ur goal but im afraid I too see smoke in ur future! Cant wait to see the score, I think we should bet on the number.

lnsomnia
01-15-2014, 09:54 PM
Looking forward to the finished product! Have fun and good luck!

akadj
01-15-2014, 10:22 PM
So these were the worst ever subs that u chose, did someone link u to them from ur search thread? This is great, I wish u luck in reaching ur goal but im afraid I too see smoke in ur future! Cant wait to see the score, I think we should bet on the number.

I'm nervous, I also see smoke in the future... I know if I went bigger better drivers they would handle it no problems.. But where's the fun in that BAHAHA

Realistically what score is your prediction?

akadj
01-15-2014, 10:26 PM
2 post

Lowlacs
01-15-2014, 10:38 PM
The Rango is alot of area to charge but Id guess 139-40 right before half of them seize,lol. Ive read the entire geo thread so I have no doubt in ur abilities and I think this is what'll get u near to ur goal. Just for kicks u should cut one open after the build for gut shots. Do they list a coil diameter? I wouldnt think they'd be any larger than 1.5in and maybe 1" of winding. Forgive me if this isnt the correct terms, but Id say the coils are tiny. I vote Lanzar max 6.5s next time and Id bet u'd hit ur target.

akadj
01-16-2014, 12:29 AM
It says 1.5 in coils.

And the reason I didn't go with the Lanzar is because they actually make higher end woofers.. This way there's no doubt they are the bottom line brand of woofers.

des343
01-16-2014, 12:55 AM
Should have gone with the Lanzar Max Pro subs

DB-Audio
01-16-2014, 07:07 AM
^^^this lanzar would have been better also cheap but cant wait to see the results

globalminds_ent
01-16-2014, 07:43 AM
Should have gone with the Lanzar Max Pro subs lanzar max subs get down i kid u not dont no about the max pros. But the max if you put them in the right box they sound decent on minimal power
Dont bash if you dont know what your talkin about. And oh ive seen em last for years at that

tenbux1970
01-16-2014, 08:38 AM
Could use those for door mids too. Would work out good for that,2 or 4 per door.

michaellane
01-16-2014, 09:01 AM
I wanted to get the cheapest woofers I could find an make them loud, money was not an issue, the lower the quality/expectations the better. I want to make this Dodge Durango do a 145db legit sealed on the dash off 2000 watts so I can run street stock in the Db Drags.

I had a hard time choosing cheap woofers.. Theres so many junk ones out there that caught my eye!

Pyramid, Pyle, legacy, rampage, boss audio, sound storm.. How do you choose.. There's so many out there!

Then I came across these Pyle 6" dual 4 ohm "600" watt woofers and I was sold!!

They retail at $10.99 each at Walmart (USA only) and handle 600 WATT'S??.. SCORE!!!! LOL

So I tried to get them to ship to a Canadian store, they said they don't ship across the boarder. If its not sold in Canadian Walmart's I'll have to look else where. WTF?

So I had to buy them else where and pay for the shipping/taxes/import fees/duty myself.

Big thanks to BEACH AUDIO for selling me them and doing all the leg work with customs so I could get these dream woofers!!

After everything was said and done I ended up with a $350.00 bill for 10 of them.. But as I said money was not going to be an issue.

I have more amps at my disposal then most people, so I was set there.

Decided to go with a new brand we picked up and have been working closely with "Sonido Mask ZX-2000. 1"

We've had the amp on the bench and done in car testing as well, it easily does 2kw clean and has average efficiency.

So it was time to get to wood working, I had a ton of boxes going through my head but was limited with space because of the street stock rules. Ended up building a transmission line with a 5 foot long port, then decided to alter the port so it has a tapered flare/horn port over the whole 5 ft of length. The port starts at 24sq" and flares out to 100sq"

So I'm running the amp at 0.8 ohms by running 5 woofers parallel and the coils series and the same for the other 5 woofers, then parallel both together. If any one is.lost with that,... Its to many series parallel and parallel again coils to.explain.. I'll try and get a diagram made for you just pm.

I haven't put it in the truck and run it on the meter yet, letting the glue dry and I'm some what nervous LOL.. No one likes to fail!!

I could have waited till I found out if it worked and made a thread or not if I failed.. But what ever.

I still have to upgrade my power wire to 1 aught - 0 gauge.. I like to say 1 aught cuz zero gauge sounds smaller LOL.. I've got a few hundred feet left over from the metro build.

So the door bell rings and they show up at the door.. I was just waiting for these things to come!!

After opening them the first thing out of my buddy's mouth was .." Sweet Jesus, are the voice coils spun from tin foil, I bet the spider is made from pantyhose, its so weak and soft! You better be happy if you do a 135!!!" BAHAHA


Here's a few photos... For now



http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140113_091335_zpsktythbwj.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140113_091335_zpsktythbwj.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140113_091209_zpsmzi4252t.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140113_091209_zpsmzi4252t.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140113_092613_zps6aomcbpg.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140113_092613_zps6aomcbpg.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140115_144414_zpswi8qsmi4.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140115_144414_zpswi8qsmi4.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140115_144517_zps6qy7mh0e.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140115_144517_zps6qy7mh0e.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140114_143159_zps0mbp4jtw.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140114_143159_zps0mbp4jtw.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140114_150116_zpsvjzzlvol.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140114_150116_zpsvjzzlvol.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140114_145621_7_bestshot_zpswf3ae0sp.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140114_145621_7_bestshot_zpswf3ae0sp.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140114_110802_zpsdiqzj9wv.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140114_110802_zpsdiqzj9wv.jpg.html)



http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140115_145142_8_bestshot_zpsqyyku8gw.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140115_145142_8_bestshot_zpsqyyku8gw.jpg.html)



meter that thing or get it in the car and report back man!!!! PM me once you get them in the car also what other 6" woofers did you look into???

nismos14
01-16-2014, 09:10 AM
125

Spooney
01-16-2014, 10:09 AM
Real interested to see how this ends up win or fail. Its a cool project and I would love to try something like this myself.

akadj
01-16-2014, 12:20 PM
meter that thing or get it in the car and report back man!!!! PM me once you get them in the car also what other 6" woofers did you look into???

I looked into some pyle square subs or the legacy red cone square subs. I wanted to get 3 of them in 15" but the only made 10's & 12's

I loved the pyramid square 8" but they had been discontinue for a while now. That's really what I had my heart set on.

michaellane
01-16-2014, 12:43 PM
I looked into some pyle square subs or the legacy red cone square subs. I wanted to get 3 of them in 15" but the only made 10's & 12's

I loved the pyramid square 8" but they had been discontinue for a while now. That's really what I had my heart set on.

well how do these things sound?

av83
01-16-2014, 01:03 PM
This is pretty sweet. Tuned in.

des343
01-16-2014, 05:56 PM
lanzar max subs get down i kid u not dont no about the max pros. But the max if you put them in the right box they sound decent on minimal power
Dont bash if you dont know what your talkin about. And oh ive seen em last for years at that

Oh no your very right and the max pros are rated for 1k rms and will fully deliver it u can order like 4 15s for under 250 bucks I always wanted to get 6 of them but I can't afford to up my electrical enough

SplAffair
01-16-2014, 07:18 PM
Subscribed. Can't wait to see this done

bgowdy31
01-16-2014, 07:23 PM
I wanted to get the cheapest woofers I could find an make them loud, money was not an issue, the lower the quality/expectations the better. I want to make this Dodge Durango do a 145db legit sealed on the dash off 2000 watts so I can run street stock in the Db Drags.

I had a hard time choosing cheap woofers.. Theres so many junk ones out there that caught my eye!

Pyramid, Pyle, legacy, rampage, boss audio, sound storm.. How do you choose.. There's so many out there!

Then I came across these Pyle 6" dual 4 ohm "600" watt woofers and I was sold!!

They retail at $10.99 each at Walmart (USA only) and handle 600 WATT'S??.. SCORE!!!! LOL

So I tried to get them to ship to a Canadian store, they said they don't ship across the boarder. If its not sold in Canadian Walmart's I'll have to look else where. WTF?

So I had to buy them else where and pay for the shipping/taxes/import fees/duty myself.

Big thanks to BEACH AUDIO for selling me them and doing all the leg work with customs so I could get these dream woofers!!

After everything was said and done I ended up with a $350.00 bill for 10 of them.. But as I said money was not going to be an issue.

I have more amps at my disposal then most people, so I was set there.

Decided to go with a new brand we picked up and have been working closely with "Sonido Mask ZX-2000. 1"

We've had the amp on the bench and done in car testing as well, it easily does 2kw clean and has average efficiency.

So it was time to get to wood working, I had a ton of boxes going through my head but was limited with space because of the street stock rules. Ended up building a transmission line with a 5 foot long port, then decided to alter the port so it has a tapered flare/horn port over the whole 5 ft of length. The port starts at 24sq" and flares out to 100sq"

So I'm running the amp at 0.8 ohms by running 5 woofers parallel and the coils series and the same for the other 5 woofers, then parallel both together. If any one is.lost with that,... Its to many series parallel and parallel again coils to.explain.. I'll try and get a diagram made for you just pm.

I haven't put it in the truck and run it on the meter yet, letting the glue dry and I'm some what nervous LOL.. No one likes to fail!!

I could have waited till I found out if it worked and made a thread or not if I failed.. But what ever.

I still have to upgrade my power wire to 1 aught - 0 gauge.. I like to say 1 aught cuz zero gauge sounds smaller LOL.. I've got a few hundred feet left over from the metro build.

So the door bell rings and they show up at the door.. I was just waiting for these things to come!!

After opening them the first thing out of my buddy's mouth was .." Sweet Jesus, are the voice coils spun from tin foil, I bet the spider is made from pantyhose, its so weak and soft! You better be happy if you do a 135!!!" BAHAHA


Here's a few photos... For now



http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140113_091335_zpsktythbwj.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140113_091335_zpsktythbwj.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140113_091209_zpsmzi4252t.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140113_091209_zpsmzi4252t.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140113_092613_zps6aomcbpg.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140113_092613_zps6aomcbpg.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140115_144414_zpswi8qsmi4.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140115_144414_zpswi8qsmi4.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140115_144517_zps6qy7mh0e.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140115_144517_zps6qy7mh0e.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140114_143159_zps0mbp4jtw.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140114_143159_zps0mbp4jtw.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140114_150116_zpsvjzzlvol.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140114_150116_zpsvjzzlvol.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140114_145621_7_bestshot_zpswf3ae0sp.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140114_145621_7_bestshot_zpswf3ae0sp.jpg.html)


http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140114_110802_zpsdiqzj9wv.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140114_110802_zpsdiqzj9wv.jpg.html)



http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140115_145142_8_bestshot_zpsqyyku8gw.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140115_145142_8_bestshot_zpsqyyku8gw.jpg.html)


were can you get pricing on those sonido mask amps at?

akadj
01-16-2014, 07:58 PM
I'm a distributor in Canada

akadj
01-16-2014, 08:29 PM
TEN 6" Pyle subs in dodge Durango - YouTube (http://youtu.be/y5uHqZd7OzU)

K so I'm still running my Harrison Labs AudioEngine 1600.2 amp at 3 ohms.. This amp is over 20 years old ... I clamped it at 990 watts at 2 ohms previous setup.. Not sure what its doing now. Its not as loud as it was with the two twelves at 141db either. I'll meter it the next week but I'm guessing currently 137db... I hope lol

bgowdy31
01-17-2014, 12:22 AM
I'm a distributor in Canada

do yal ship to US?

phemps
01-17-2014, 03:35 AM
Sweet build get those beasts on some power hah

Beau M
01-17-2014, 02:02 PM
Wow those salty Canadian roads are hell on cars eh?

michaellane
01-17-2014, 02:32 PM
TEN 6" Pyle subs in dodge Durango - YouTube (http://youtu.be/y5uHqZd7OzU)

K so I'm still running my Harrison Labs AudioEngine 1600.2 amp at 3 ohms.. This amp is over 20 years old ... I clamped it at 990 watts at 2 ohms previous setup.. Not sure what its doing now. Its not as loud as it was with the two twelves at 141db either. I'll meter it the next week but I'm guessing currently 137db... I hope lol


how did they sound?

akadj
01-17-2014, 09:49 PM
Wow those salty Canadian roads are hell on cars eh?

Oh its terrible, in the city they don't allow salt but in rural areas that's all the use.



how did they sound?

It doesn't sound bad at all, I need more power. I'm busy this weekend, so maybe in the middle next week I'll run power wire and put a Sonido Mask ZX series 2000 watt

michaellane
01-18-2014, 01:49 PM
Oh its terrible, in the city they don't allow salt but in rural areas that's all the use.




It doesn't sound bad at all, I need more power. I'm busy this weekend, so maybe in the middle next week I'll run power wire and put a Sonido Mask ZX series 2000 watt

check your inbox. also where did you find these for $10

akadj
01-19-2014, 08:09 PM
check your inbox. also where did you find these for $10

I got them from beach audio for 11.24 each. Plus fees to get them to Canada but I'm sure it would be just the 11$ for you

Spooney
01-19-2014, 08:34 PM
Any numbers yet?

akadj
01-20-2014, 01:35 AM
Any numbers yet?

No I was working on the metro build... Sad to say I burnt a coil in one of the woofers. I wanted to get different woofers or coil configuration but not this way.

Looking into a few things, maybe new 18" atomic.. Maybe recones.. Maybe some DC Audio 18 carbon fiber lvl 5 dual 1's

akadj
01-20-2014, 11:11 AM
Burnt a coil in the metro not one of these 6"... After reading that again, Didn't look to clear

akadj
01-20-2014, 08:40 PM
Well, I just bought a brand new Dodge 2500 diesel today.. So I'm not sure what I'm gonna do with the Durango.. Either strip the metro and do a bandpass wall in the Durango or sell it.. I'm thinking bandpass lol

http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140120_154741_zpskvtdbkqq.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140120_154741_zpskvtdbkqq.jpg.html)


Still have to get fender flares, side step bars, tonneau cover AMD a rust protection done to the truck. BUT I LOVE IT!!

SplAffair
01-20-2014, 08:47 PM
Well, I just bought a brand new Dodge 2500 diesel today.. So I'm not sure what I'm gonna do with the Durango.. Either strip the metro and do a bandpass wall in the Durango or sell it.. I'm thinking bandpass lol

http://i1225.photobucket.com/albums/ee397/DanielKnew/Mobile%20Uploads/20140120_154741_zpskvtdbkqq.jpg (http://s1225.photobucket.com/user/DanielKnew/media/Mobile%20Uploads/20140120_154741_zpskvtdbkqq.jpg.html)


Still have to get fender flares, side step bars, tonneau cover AMD a rust protection done to the truck. BUT I LOVE IT!!
very nice truck. im jealous.