PDA

View Full Version : Tundra Limited Access Cab Build



fatboytyler
01-04-2014, 08:35 PM
So I am upgrading my two 10" Daytons in bandpass boxes (pictures of these sometime to come) to 2 SA-12s. I yanked out 3/4 of my backseat (pictures soon) to set the box in.

I'll only be pumping 600W a piece into these, but it'll be better than I have and allow me plenty of headroom.

Here is my box progress over the last 2 days:
http://imageshack.us/a/img853/6362/7sy0.jpg
http://imageshack.us/a/img607/7605/iqm6.jpg
http://imageshack.us/a/img823/7291/zke2.jpg
http://imageshack.us/a/img21/6651/ermu.jpg
http://imageshack.us/a/img812/5508/15o1.jpg

Box will be 4 Cubes @ 32 Hz, designed by Buck at High Output Enclosures.

Also, as a side note, I will be painting these. What paint would you guys recommend?