PDA

View Full Version : Box for two XFL 15's



Pyrofan
12-20-2013, 12:55 PM
so im building a box for a buddy, what is the best volume and port area for two XFL 15's taking power from a VFL44801D. he listens to mainly Rap.

NASTY08IMPALA
12-20-2013, 12:58 PM
so im building a box for a buddy, what is the best volume and port area for two XFL 15's taking power from a VFL44801D. he listens to mainly Rap.

Whats it goin in ?

---------- Post added at 11:58 AM ---------- Previous post was at 11:57 AM ----------

http://www.caraudio.com/forums/enclosure-design-construction-help/594893-box-build-2-xfl-15s-box-p%2Arn-inside.html

Pyrofan
12-20-2013, 02:55 PM
Whats it goin in ?

---------- Post added at 11:58 AM ---------- Previous post was at 11:57 AM ----------

http://www.caraudio.com/forums/enclosure-design-construction-help/594893-box-build-2-xfl-15s-box-p%2Arn-inside.html
2007 Tahoe. Rear seats removed

NASTY08IMPALA
12-20-2013, 10:32 PM
2007 Tahoe. Rear seats removed

The box above is goin in a 99 tahoe

Pyrofan
12-21-2013, 01:45 PM
The box above is goin in a 99 tahoe

So even it their 4000 watts 8.5 cubes aint to big?

NASTY08IMPALA
12-21-2013, 05:13 PM
So even it their 4000 watts 8.5 cubes aint to big?

U mean 4000w amp or. A clamped 4k big diff.? .and about 4-4.5 cubes is the norm per 15

Pyrofan
12-21-2013, 05:38 PM
U mean 4000w amp or. A clamped 4k big diff.? .and about 4-4.5 cubes is the norm per 15

Dont know what clamped is

NASTY08IMPALA
12-21-2013, 05:40 PM
Dont know what clamped is

Ok what amp will they be on?

Buck
12-21-2013, 05:41 PM
I can design a box for you, very familiar with these woofers, had a lot of hands on experience with AB in general.

NASTY08IMPALA
12-21-2013, 05:44 PM
Buck; designed the box I linked..also does all my boxes and any for my friends..take all the guess work out and get him to take care of it

Pyrofan
12-21-2013, 08:05 PM
I can design a box for you, very familiar with these woofers, had a lot of hands on experience with AB in general.
Yea iv seen your work. I know your good. Hes just out of money and cant pay for a design.

Buck
12-21-2013, 09:06 PM
8.5 cubes @ 32 hz, 14-16 in^2 per cube.

Pyrofan
12-21-2013, 09:27 PM
8.5 cubes @ 32 hz, 14-16 in^2 per cube.

so 127in^2?

NASTY08IMPALA
12-21-2013, 09:31 PM
so 127in^2?

Yes 127 inches of total port would give u almost 15 per cube .that will work fine..download torres calc

Buck
12-21-2013, 10:09 PM
You can tune anywhere from like 30-35 actually but I like 32.

Pyrofan
12-22-2013, 01:56 PM
8.5 cubes @ 32 hz, 14-16 in^2 per cube.

How does this look?

Pyrofan
12-23-2013, 05:17 PM
Anyone?