View Full Version : Skar Audio SK-2500.1D Amp Dyno Test Results (SMD AD-1) - Video + More

12-20-2013, 12:04 PM
After much demand we have finally gotten around to putting the Skar Audio SK-2500.1D on our test bench and the Dyno Results are in...

We used (4) Shuriken 16V Batteries for testing and this was a non-charging load. The purpose of using the 16V batteries is so that after the heavy draw from the amplifier during the testing, we get real power ratings at that 14.4v~ load as you will see in this video.

The SK-2500.1D proved to stand up to its ratings and then some =)

For more information on the SK-2500.1D, please visit Skar Audio - Where Audiophiles Meet Excellence (http://www.SkarAudio.com)

Amplifier : Skar Audio SK-2500.1D
Dyno : SMD AD-1 Amp Dyno


Certified @ 1 Ohm : 2,793 Watts @ 14.35v
Certified @ 0.5 Ohm : 3,393 Watts @ 13.61v

Un-certified @ 1 Ohm : 2,836 Watts @ 14.3v

Dynamic @ 1 Ohm : 2,953 Watts @ 14.72v
Dynamic @ 0.5 Ohm : 4,289 Watts @ 14.51v

More testing videos coming soon! Check out the video below...


Skar Audio SK-2500.1D AMP DYNO TESTING (SMD AD-1) // POWERFUL!! - YouTube (http://www.youtube.com/watch?v=TKPDg7D1gkg)

02-04-2014, 07:28 AM
awesome good info !!!!