PDA

View Full Version : 4000 rms 98 Camry, Tantric Sounds, SoundQubed



thatguy12
12-15-2013, 12:34 AM
Well guys, my build is about to start happening. the items are coming in the mail one by one and im getting real exited. i have done quite a few builds for friends that i haven't posted, but this is my own so i would like to share it and get some advise as this is my first big boy build (at least in my eyes)to start off i will name all the equipment i will be using so far. I hope to have this build up and playing before i go back to school in the middle of Janurary.
-Sub Amp- SoundQubed 3500.1
-Mids Amp- SoundQubed 125.4
-Tweeter Amp (maybe)- my old pioneer
-Subwoofers- Two 10 inch Tantric Sounds HDs
-Head Unit- Pioneer Deh 80 prs
-100 feet of 1/0 gauge execution wire
-Alternator- 200 Amp Mike Singer
-Batteries- One Shuriken BT 80, Two Crescendo Group 31s
- A couple of volt meters and other miscellaneous items
Now on to the pics of the items i have already recieved
My new car (to me) 1998 toyota camry 2.2 L
http://i1019.photobucket.com/albums/af319/robotaustin12/IMG_20131128_113307_5251_zpsf9281083.jpg (http://s1019.photobucket.com/user/robotaustin12/media/IMG_20131128_113307_5251_zpsf9281083.jpg.html)

Sound Qubed 3500.1 and 125.4
http://i1019.photobucket.com/albums/af319/robotaustin12/IMG_20131214_222019_4421_zpsb90c10a1.jpg (http://s1019.photobucket.com/user/robotaustin12/media/IMG_20131214_222019_4421_zpsb90c10a1.jpg.html)
http://i1019.photobucket.com/albums/af319/robotaustin12/IMG_20131214_222029_8171_zps4556a6a9.jpg (http://s1019.photobucket.com/user/robotaustin12/media/IMG_20131214_222029_8171_zps4556a6a9.jpg.html)
http://i1019.photobucket.com/albums/af319/robotaustin12/IMG_20131214_221807_1311_zps8c9287a7.jpg (http://s1019.photobucket.com/user/robotaustin12/media/IMG_20131214_221807_1311_zps8c9287a7.jpg.html)

thatguy12
12-15-2013, 12:37 AM
Execution Audio 1/0 Gauge CCA wire
http://i1019.photobucket.com/albums/af319/robotaustin12/IMG_20131214_222116_2841_zpsc92af3c8.jpg (http://s1019.photobucket.com/user/robotaustin12/media/IMG_20131214_222116_2841_zpsc92af3c8.jpg.html)
http://i1019.photobucket.com/albums/af319/robotaustin12/IMG_20131214_222901_8171_zps0f99d5de.jpg (http://s1019.photobucket.com/user/robotaustin12/media/IMG_20131214_222901_8171_zps0f99d5de.jpg.html)

thatguy12
12-15-2013, 12:40 AM
Crescendo Group 31 Batteries
http://i1019.photobucket.com/albums/af319/robotaustin12/IMG_20131214_223316_2731_zpsa3ad9ec2.jpg (http://s1019.photobucket.com/user/robotaustin12/media/IMG_20131214_223316_2731_zpsa3ad9ec2.jpg.html)
http://i1019.photobucket.com/albums/af319/robotaustin12/IMG_20131214_223345_4311_zpse7268d49.jpg (http://s1019.photobucket.com/user/robotaustin12/media/IMG_20131214_223345_4311_zpse7268d49.jpg.html)
Remote wire, usb extender, 20 terminals (20 more on the way) Speaker wire
http://i1019.photobucket.com/albums/af319/robotaustin12/IMG_20131214_222339_6491_zps88b50fef.jpg (http://s1019.photobucket.com/user/robotaustin12/media/IMG_20131214_222339_6491_zps88b50fef.jpg.html)
****** Rca's
http://i1019.photobucket.com/albums/af319/robotaustin12/IMG_20131214_222220_1351_zps609d920c.jpg (http://s1019.photobucket.com/user/robotaustin12/media/IMG_20131214_222220_1351_zps609d920c.jpg.html)
i dont know if this will work with my pioneer, i sure hope so
http://i1019.photobucket.com/albums/af319/robotaustin12/IMG_20131214_222408_4831_zps0bc705ca.jpg (http://s1019.photobucket.com/user/robotaustin12/media/IMG_20131214_222408_4831_zps0bc705ca.jpg.html)

thatguy12
12-15-2013, 12:46 AM
still waiting on my subs as they are being made, my alternator, some terminals, fuse blocks, and my volt meters.

thatguy12
12-15-2013, 06:00 PM
anybody know any good 6.5 components that sound really good, get decently loud, and can handle at least 90 rms? i have been looking at the tantric comps but also wanna hear some other ideas. budget around 200$ depending on whats out there.

Ronoman
12-16-2013, 03:34 PM
anybody know any good 6.5 components that sound really good, get decently loud, and can handle at least 90 rms? i have been looking at the tantric comps but also wanna hear some other ideas. budget around 200$ depending on whats out there.

Towards the end of the summer I got myself a pair of the Incriminator Audio 6.5 component set. They sound amazing...
I65C 6.5" Component Set (http://www.incriminatoraudio.com/index.php/products/speakers/i65c-i-series-6-5-components.html)
I have heard great things about Crescendo's CZ series also
CZ Series 6.5" 2 Way - Crescendo Audio | Online Store (http://store.crescendoaudio.com/cz-series-6-5-2-way/)

trumpet
12-16-2013, 05:15 PM
anybody know any good 6.5 components that sound really good, get decently loud, and can handle at least 90 rms? i have been looking at the tantric comps but also wanna hear some other ideas. budget around 200$ depending on whats out there.

CDT HD-61 is a good one, although HD-61A has better crossovers. JBL P660C is another good option. We have these in stock.

thatguy12
12-16-2013, 10:59 PM
CDT HD-61 is a good one, although HD-61A has better crossovers. JBL P660C is another good option. We have these in stock.

i was cruzing you store earlier for cdt. theres just so many i dont know where to start. ill check out the ones you mentioned

thatguy12
12-16-2013, 11:03 PM
Towards the end of the summer I got myself a pair of the Incriminator Audio 6.5 component set. They sound amazing...
I65C 6.5" Component Set (http://www.incriminatoraudio.com/index.php/products/speakers/i65c-i-series-6-5-components.html)
I have heard great things about Crescendo's CZ series also
CZ Series 6.5" 2 Way - Crescendo Audio | Online Store (http://store.crescendoaudio.com/cz-series-6-5-2-way/)

i should have gotten the speakers during the black and blue sale lol.

Ronoman
12-16-2013, 11:07 PM
i should have gotten the speakers during the black and blue sale lol.

I don't think they were on sale for that.. I could be wrong
To be honest I think even at $130 they are a great deal!!

FamousMassacre
12-16-2013, 11:36 PM
I've seen the IAs around $90 slightly used

trumpet
12-17-2013, 10:19 AM
i was cruzing you store earlier for cdt. theres just so many i dont know where to start. ill check out the ones you mentioned

HD-61 isn't on our store. It's the same as HD-61A (http://cdtdealer.com/easy-way-electronics/hd_series/hd61a.htm), except it uses smaller crossovers that don't have any adjustments. If you run them active it's a better value because the mids and tweeters are the same.

R34P3R
12-17-2013, 12:32 PM
Didn't see sound deadening mentioned. It would be a very wise investment and much easier to do BEFORE all your equipment is in the car.

thatguy12
12-17-2013, 12:36 PM
Didn't see sound deadening mentioned. It would be a very wise investment and much easier to do BEFORE all your equipment is in the car.

forgot about that, i have about 30 square feet of audio technix 80 mill left over from last build. going to do the roof at least and if i have enough the front doors. if i dont will have to wait a month or two. spent my budget that i allow myself each month already.i hate deadening thoug, its my least favorite part of audio lol

thatguy12
12-17-2013, 12:38 PM
Didn't see sound deadening mentioned. It would be a very wise investment and much easier to do BEFORE all your equipment is in the car.

since i am going to be doing a forward firing sealed trunk wall set up does it even make sence to deaden the trunk?

thatguy12
12-17-2013, 02:50 PM
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131217_133309_859_zpsa5fead5d.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131217_133309_859_zpsa5fead5d.jpg.html)audio technix 80 mill sound deadner
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131217_133030_659_zpsfa87adf1.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131217_133030_659_zpsfa87adf1.jpg.html)
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131217_133040_268_zps36e300f8.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131217_133040_268_zps36e300f8.jpg.html)
the fuses are in. audio technix dual 1/0 gauge terminal fus holder, rapter fuse holders, ixos fuse holder, RF fuse holder
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131217_133254_699_zps5b079a8b.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131217_133254_699_zps5b079a8b.jpg.html)

thatguy12
12-23-2013, 09:23 PM
the subs are in
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131223_190551_286_zps0117c499.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131223_190551_286_zps0117c499.jpg.html)
that a$$..... big, juicy, and could beat me up.
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131223_190621_773_zpsf6f2e161.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131223_190621_773_zpsf6f2e161.jpg.html)

thatguy12
12-27-2013, 08:24 PM
running my componant wires, four channel rcas, sub amp rca
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131227_165914_132_zps14cf5034.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131227_165914_132_zps14cf5034.jpg.html)
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131227_165921_769_zps8b0643f2.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131227_165921_769_zps8b0643f2.jpg.html)

thatguy12
12-27-2013, 08:28 PM
found this awesome hole in the corner of my trunk to run wires though safely
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131227_165948_846_zps3c55fe02.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131227_165948_846_zps3c55fe02.jpg.html)
cleaned up
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131227_170529_090_zps0a05444e.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131227_170529_090_zps0a05444e.jpg.html)

thatguy12
12-27-2013, 08:30 PM
finsihed installing the pioneer deh 80 prs. it wouldn't fi cause of all the rca and random stuff behind the headunit. so its not 100% flush, but it still looks nice.
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131227_185911_737_zpsec16a3ab.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131227_185911_737_zpsec16a3ab.jpg.html)

thatguy12
12-27-2013, 08:38 PM
i will have two usb connections, sd card, and a rear aux cord.
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131227_190055_229_zps1a32a187.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131227_190055_229_zps1a32a187.jpg.html)
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131227_190113_858_zpscf47fd08.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131227_190113_858_zpscf47fd08.jpg.html)

Timmy13091
12-27-2013, 08:38 PM
finsihed installing the pioneer deh 80 prs. it wouldn't fi cause of all the rca and random stuff behind the headunit. so its not 100% flush, but it still looks nice.
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131227_185911_737_zpsec16a3ab.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131227_185911_737_zpsec16a3ab.jpg.html)

These things banging yet ? Let's see some vids !!

thatguy12
12-27-2013, 08:41 PM
one of my rca wasnt long enough. either gunna buy a new rca or use a connecter and another set of rcas to extend to the trunk.
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131227_190200_416_zps2b3be749.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131227_190200_416_zps2b3be749.jpg.html)
That is all i have gotten done for the day. waiting on more terminals to run 2 runs of positiv and 2 runs of negative 1/0 cca.

thatguy12
12-27-2013, 08:43 PM
These things banging yet ? Let's see some vids !!

not yet, still gotta run pos and grounds, build a box, then seal my trunk. doing a forward firing sealed trunk. i only have till the 13th of jan before i go back to school so hopefully will be done by then.

Timmy13091
12-27-2013, 08:45 PM
one of my rca wasnt long enough. either gunna buy a new rca or use a connecter and another set of rcas to extend to the trunk.
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131227_190200_416_zps2b3be749.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131227_190200_416_zps2b3be749.jpg.html)
That is all i have gotten done for the day. waiting on more terminals to run 2 runs of positiv and 2 runs of negative 1/0 cca.

You should do a run direct from alt to rear batt bank ... Even if you have to only do a single pos and neg off the battery for now .. The alt to back run should help more then your second pos and neg run .. Also be sure to still do 1 or 2 dedicated rear grounds as well ..

thatguy12
12-27-2013, 08:52 PM
You should do a run direct from alt to rear batt bank ... Even if you have to only do a single pos and neg off the battery for now .. The alt to back run should help more then your second pos and neg run .. Also be sure to still do 1 or 2 dedicated rear grounds as well ..
i was wandering about this, all my batteries are agm, would my front batt still get a decent charge along with the rear? so only have one run of postive between front batt and rear bank and have one run from alt to rear bank?

Timmy13091
12-27-2013, 09:00 PM
i was wandering about this, all my batteries are agm, would my front batt still get a decent charge along with the rear? so only have one run of postive between front batt and rear bank and have one run from alt to rear bank?

Yes that's correct .. And your front batt will charge fine .. If your really worried toss another 2ft piece from alt to front batt as well .. Not gunna matter .. But yes I'd rather have a single run of each from main batt and a single run from alt to rear .. Then 2 runs each from front batt and no run from alt to back .. Now if u have enough wire to do it all then go for it .. Just remember there is no reason to have more wire then what your alt and front batt are capable of sending

thatguy12
12-27-2013, 09:20 PM
Yes that's correct .. And your front batt will charge fine .. If your really worried toss another 2ft piece from alt to front batt as well .. Not gunna matter .. But yes I'd rather have a single run of each from main batt and a single run from alt to rear .. Then 2 runs each from front batt and no run from alt to back .. Now if u have enough wire to do it all then go for it .. Just remember there is no reason to have more wire then what your alt and front batt are capable of sending
thank you, i will do one run to rear bat then.

thatguy12
12-27-2013, 11:12 PM
crimping and heat shrink for the big 3 upgrade. positive wire (oarnge) will be fused with a 300 amp fuse.
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131227_220157_336_zpsd1538937.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131227_220157_336_zpsd1538937.jpg.html)

Timmy13091
12-27-2013, 11:38 PM
crimping and heat shrink for the big 3 upgrade. positive wire (oarnge) will be fused with a 300 amp fuse.
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131227_220157_336_zpsd1538937.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131227_220157_336_zpsd1538937.jpg.html)

Looks good bro ..!

thatguy12
12-27-2013, 11:49 PM
Looks good bro ..!
thanks, first time ever touching a hydraulic crimper as i always soilder. wasnt 100% sure how tight i should crimp the terminals, so i went super hard lol.

Timmy13091
12-28-2013, 12:52 AM
thanks, first time ever touching a hydraulic crimper as i always soilder. wasnt 100% sure how tight i should crimp the terminals, so i went super hard lol.

Yep just crank that bish till it quits crankin lol

thatguy12
12-30-2013, 04:01 PM
yesterday i ran 4 runs of 0/1 gauge, my remote wire, and all my bass knobs wires. now on to the pics
heres where i decided to drill through the firewall
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131229_105350_525_zps2e6c2673.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131229_105350_525_zps2e6c2673.jpg.html)
my best friend while working. the windchill is in the negatives where im at, and this propane heater keeps me sweating in my garage. i also get almost 10 hours of heat for 17$ in propane. so worth it

http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131229_105710_869_zpsd7dfb91f.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131229_105710_869_zpsd7dfb91f.jpg.html)

thatguy12
12-30-2013, 04:12 PM
i am so lucky my car has holes behind the rear seatbelt cushions. i was able to fit all the runs of 1/0 gauge somehow, and they done get pinched.
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131229_113854_913_zpsadd03255.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131229_113854_913_zpsadd03255.jpg.html)
cleaned up a little
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131229_143108_936_zpsbd4e65fd.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131229_143108_936_zpsbd4e65fd.jpg.html)
how it looks in the front for now. everything is zip tied and not connected; waiting for my alt which should be shipped out today, terminals which should have been here last wednesday, and my voltmeters cause amazon on that BS.

http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131229_165824_712_zps10ba0cef.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131229_165824_712_zps10ba0cef.jpg.html)

thatguy12
12-30-2013, 04:18 PM
]a mess of wires in my trunk. i made my 1/0 runs really long so theres a lot in my trunk. its easier to cut wire than to extend it, so i wanted to make sure my wires didnt run short.
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131229_170841_462_zpse38b7e6b.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131229_170841_462_zpse38b7e6b.jpg.html)
heres one thing i wasnt happy about. it was impossible to be able to get my kick panels back on with no gaps. i tried for 45 min, but what can you expect with huge bulges from 4 runs of 1/0 gauge lol

http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131229_165936_638_zps66763009.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131229_165936_638_zps66763009.jpg.html)

NASTY08IMPALA
12-30-2013, 04:27 PM
]a mess of wires in my trunk. i made my 1/0 runs really long so theres a lot in my trunk. its easier to cut wire than to extend it, so i wanted to make sure my wires didnt run short.
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131229_170841_462_zpse38b7e6b.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131229_170841_462_zpse38b7e6b.jpg.html)
heres one thing i wasnt happy about. it was impossible to be able to get my kick panels back on with no gaps. i tried for 45 min, but what can you expect with huge bulges from 4 runs of 1/0 gauge lol

http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20131229_165936_638_zps66763009.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20131229_165936_638_zps66763009.jpg.html)

Shoulda pulled the seats and ran the wire under a seat or up the middle thats what i did with my 4 runs..all trim still looks stock..that **** bugs me

thatguy12
12-30-2013, 04:41 PM
Shoulda pulled the seats and ran the wire under a seat or up the middle thats what i did with my 4 runs..all trim still looks stock..that **** bugs me
i know i should have, no excuse other than i wasnt in the mood to take my seats out. its already annoying me. some of my friends dont even tuck their power wire. its just run across the carpet in everyones view, its nasty.

NASTY08IMPALA
12-30-2013, 04:52 PM
i know i should have, no excuse other than i wasnt in the mood to take my seats out. its already annoying me. some of my friends dont even tuck their power wire. its just run across the carpet in everyones view, its nasty.

Yea only 1/0 u see in my car is under the hood and and 6" into the amp and i have over 150' clean install is one of my bugaboos lol ..looks good tho

thatguy12
12-30-2013, 05:00 PM
Yea only 1/0 u see in my car is under the hood and and 6" into the amp and i have over 150' clean install is one of my bugaboos lol ..looks good tho
thank you, im trying. i definetely have a hella lot more to learn. this whole car is gunna be an experiment. questions though, i have one positive going from alt to front battery and one from alt to rear bank.for the alt to rear bank shoul i fuse by the alt? im already fusing by every battery on both input and output but not sure if i should fuse by the alt.

NASTY08IMPALA
12-30-2013, 05:07 PM
thank you, im trying. i definetely have a hella lot more to learn. this whole car is gunna be an experiment. questions though, i have one positive going from alt to front battery and one from alt to rear bank.for the alt to rear bank shoul i fuse by the alt? im already fusing by every battery on both input and output but not sure if i should fuse by the alt.

I dont amd alotta ppl dont but its.a power wire just like any other ..and if it comes loose or frays bad things can happen..i just have really secure connections ..only way mine will be a problem is if i have a wreck and if so let the ***** burn

thatguy12
12-30-2013, 05:11 PM
I dont amd alotta ppl dont but its.a power wire just like any other ..and if it comes loose or frays bad things can happen..i just have really secure connections ..only way mine will be a problem is if i have a wreck and if so let the ***** burn

alright once all the electrical is installed i will go over everything and make sure its secure and will not budge. thank ya

thatguy12
01-05-2014, 06:32 PM
did some work, did some deadening on the front doors. did almost all of the inside of the door panels, did probely 25% of the inside of the outside panel. also a very tiny part of the outside panel. will do more when i get more deadner, wanted to make sure i have enough for the whole roof.


http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20140101_161015_603_zpsf32a585f.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20140101_161015_603_zpsf32a585f.jpg.html)

thatguy12
01-05-2014, 06:35 PM
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20140101_161029_747_zpse87671a8.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20140101_161029_747_zpse87671a8.jpg.html)

http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20140101_161043_534_zpsb14ba9ab.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20140101_161043_534_zpsb14ba9ab.jpg.html)

Timmy13091
01-05-2014, 06:39 PM
i know i should have, no excuse other than i wasnt in the mood to take my seats out. its already annoying me. some of my friends dont even tuck their power wire. its just run across the carpet in everyones view, its nasty.

I would pull it back and redo it the right way .. We even went as far as drilling holes to run it flush under my carpet like this ..
http://i1291.photobucket.com/albums/b558/tk13091/39CE54EE-13DA-49D4-97A9-F2DC54E2CD16-469-00000016E83D150B_zps22a0accc.jpg
Eventually you will really regret not doing it right .. So while it's still being installed you should just get it done

thatguy12
01-05-2014, 06:41 PM
found these in the doors, previous owner had a 4 gauge ofc amp kit he left in the car and some kind of cdt speakers. too bad one is blown, the cone doesnr press in.

http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20140101_172147_035_zps59b1491f.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20140101_172147_035_zps59b1491f.jpg.html)

http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20140101_172151_726_zps42c13be6.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20140101_172151_726_zps42c13be6.jpg.html)

thatguy12
01-05-2014, 06:47 PM
i was actually able to get the panel back on looking factory. didnt take a picture. now you cant see any zero gauge except under the hood, my trunk for now, and theres a tiny lump by my gas lever that you cant tell is wire and cannot see unless i show someone. it bothered me after two days so i messed with the kick pannel. used some force this time and it snapped one. it was just this little hook i couldn't get back on, once i got it hooked its not tight either.

thatguy12
01-05-2014, 07:11 PM
got my bassknobs and usb holder mounted.
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20140101_185723_895_zpsfca40b15.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20140101_185723_895_zpsfca40b15.jpg.html)

http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20140101_185744_421_zpsd153d6ee.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20140101_185744_421_zpsd153d6ee.jpg.html)

thatguy12
01-05-2014, 07:12 PM
got my bassknobs and usb holder mounted.
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20140101_185723_895_zpsfca40b15.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20140101_185723_895_zpsfca40b15.jpg.html)

http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20140101_185744_421_zpsd153d6ee.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20140101_185744_421_zpsd153d6ee.jpg.html)

thatguy12
01-05-2014, 07:15 PM
also ran my front comp wires to the door through a factory door grommet. used a shish kabob stick with the sharp side cut off, i then duct taped the speakers wires to the stick and slowly pushed it through the grommet. cant even tell there's speaker wire running through.

thatguy12
01-05-2014, 07:26 PM
also ran my front comp wires to the door through a factory door grommet. used a shish kabob stick with the sharp side cut off, i then duct taped the speakers wires to the stick and slowly pushed it through the grommet. cant even tell there's speaker wire running through.

thatguy12
01-05-2014, 07:33 PM
my 200 amp Mike Singer alt came in the other day. i ordered terminals from xplixt audio on dec 23rd and they still have not came. im getting nervous cause i need those to do my install. im hoping i dont have to go buy a bunch from home depot or a car shop, its bogus. usually they take two to three days to get my order shipped and arrived.
http://i1019.photobucket.com/albums/af319/robotaustin12/Mobile%20Uploads/IMG_20140104_185455_511_zps910c4f9e.jpg (http://s1019.photobucket.com/user/robotaustin12/media/Mobile%20Uploads/IMG_20140104_185455_511_zps910c4f9e.jpg.html)

BackintheGame
02-21-2014, 05:45 AM
So where's the update? I wanna see some more pics.

NeverEnuffBass
02-21-2014, 09:19 PM
I would pull it back and redo it the right way .. We even went as far as drilling holes to run it flush under my carpet like this ..
http://i1291.photobucket.com/albums/b558/tk13091/39CE54EE-13DA-49D4-97A9-F2DC54E2CD16-469-00000016E83D150B_zps22a0accc.jpg
Eventually you will really regret not doing it right .. So while it's still being installed you should just get it done

Did you put some sort of grommet on those drilled holes??? If not you might want to before it shorts

Timmy13091
02-24-2014, 10:56 AM
Did you put some sort of grommet on those drilled holes??? If not you might want to before it shorts

No grommet I used silicone tho after the pic was taken