View Full Version : New Sundown Nuthugger- SA10 Questions

12-12-2013, 12:27 AM
Well guys, here I am, about 10 minutes ago I decided to join the almighty sundown bandwagon (for inexpensive quality)purchasing an SA-10 D4; I'm going ported at 33hz with 1-1.35 cubes to spare. Powered by my Brx @2 ohms for a "whopping" 1400 rms (still debating on lowering the gains until I trust it). Should I keep my box on the underside of the specs (1cu) since I'm overpowering it, or use my full 1.35 cubes?

12-12-2013, 12:32 AM
Typically, if you are intending to "overpower" a sub you would want to go a little smaller on the box specs. Someone with more experience can tell just how much smaller, sundownz is on here, check his vendor page.

Side Show
12-12-2013, 12:36 AM
i'd go for recommended enclosure size, but make sure you don't cook it with that much pwr. set your gains right and all other settings on headunit and amp.

12-12-2013, 05:03 AM
Yes go max specs and that amp shouldn't out out rated the sa will take 1000 rms just go easy on the gain.