PDA

View Full Version : SOLD/CLOSED Crossfire XS-V2 18" D1



basshead7890
11-29-2013, 01:44 PM
1. Product:
Crossfire XS-V2 18" D1


2. Specs:
Triple Stack 330 OZ. Motor Structure
Black Top & Back Plate For Superior Cooling
Hybrid Extended Pole Piece
Kraft Pulp Fiber Reinforced Cone
Single Layer Wide Foam Surround
6 Spider Suspension Double Kevlar Stitched Tinsel Lead Wires Dual 1 and 2 Ohms Voice Coil Options
2500 Watts RMS Power Handling
4” high temperature flat wound aluminum voice coil

3. Description/Condition:
7/10 cosmetic, I removed the sticker on the dust cap.
9.5/10 mechanical It works 100% perfectly but one of the tinsel leads came loose from the coil lead so I soldered it back and put clear ca glue over it.

4. Price: :
$400+shipping
No Trades

5. Pictures:
http://imageshack.us/a/img844/3208/npek.jpg
http://imageshack.us/a/img33/3936/ya2l.jpg
http://imageshack.us/a/img12/3963/vkmy.jpg
http://imageshack.us/a/img692/5117/yd7c.jpg
http://farm4.staticflickr.com/3714/9725887901_a3440b09c0_b.jpg














** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
-----------------------------------------------

This message is automatically inserted in all classified threads.

Please be advised, all buyers and sellers should satisfy themselves that the other party is genuine by providing the following via PM to each other after negotiations are complete and prior to dispatching goods and making payment:

1) Telephone number. Call the number back at a unspecified time and make sure that it is the person's correct phone number.

2) Name and address including postal code

3) Valid e-mail address. Send an e-mail requesting a response to information about the deal being made.


DO NOT proceed with a deal until you are completely satisfied with all details being correct. It's in your best interest to check out these details yourself.

If transaction was completed on CACO, please use iTrader to record feedback.

Potential buyers/seller should check iTrader feedback also before continuing transaction.

jaeguerra909
11-29-2013, 03:16 PM
This is my old woofer and its a d .7

basshead7890
11-30-2013, 05:12 PM
Bump.

basshead7890
12-03-2013, 09:27 AM
bump

basshead7890
12-04-2013, 06:50 PM
bump

basshead7890
12-07-2013, 12:23 PM
I'll throw in 2 dust caps too if you want them
http://imageshack.us/a/img401/8661/onoq.jpg

basshead7890
12-11-2013, 06:52 PM
http://imageshack.us/a/img440/2859/7esj.jpg
http://imageshack.us/a/img24/2065/lo98.jpg

basshead7890
12-14-2013, 05:49 PM
$350+shipping

basshead7890
12-16-2013, 03:41 PM
bump

basshead7890
12-18-2013, 04:18 PM
bump

raptor727
12-19-2013, 03:15 AM
How far are you from pensacola?

basshead7890
12-19-2013, 03:58 AM
How far are you from pensacola?

North Alabama 354 mi, 5 hours 15 mins

basshead7890
12-20-2013, 09:30 AM
bump

basshead7890
12-22-2013, 05:44 PM
bump

basshead7890
12-25-2013, 09:33 AM
bump

basshead7890
12-27-2013, 04:42 PM
bump

basshead7890
12-28-2013, 02:23 PM
bump

basshead7890
01-05-2014, 04:08 PM
bump

basshead7890
01-07-2014, 09:33 PM
bump

basshead7890
01-09-2014, 04:12 PM
bump

basshead7890
01-11-2014, 07:56 PM
$330 shipped

basshead7890
01-14-2014, 03:42 AM
bump

basshead7890
01-16-2014, 06:20 PM
Bump.

plexlove
01-16-2014, 09:58 PM
http://imageshack.us/a/img440/2859/7esj.jpg
http://imageshack.us/a/img24/2065/lo98.jpg

Whats goin on with that tinsel??? looks like it fried and was glued back to the former???

basshead7890
01-16-2014, 10:07 PM
Whats goin on with that tinsel??? looks like it fried and was glued back to the former???


The brown stuff if the flux thats i used, im not a professional solderer, that's why it looks like that. Originally the solder is covered with colored ca glue. I just used clear ca glue.

plexlove
01-16-2014, 10:12 PM
The brown stuff if the flux thats i used, im not a professional solderer, that's why it looks like that. Originally the solder is covered with colored ca glue. I just used clear ca glue.

Ohdamn, my bad i didnt see in the listing where it said the tinsel had came off...makes sense now. But ive always heard that once the tinsel breaks from the former its pretty much done! Sorry was interested till i saw that lol

Side Show
01-16-2014, 10:14 PM
maybe try get some recone kits for them and sell them all together

basshead7890
01-19-2014, 07:46 PM
bump.

basshead7890
01-20-2014, 02:52 PM
330 shipped

n8skow
01-21-2014, 11:07 AM
sooooo raising the price?
(post #21 (http://www.caraudio.com/forums/usertag.php?do=list&action=hash&hash=21) said $330 shipped...)


$386 shipped each today

raptor727
01-21-2014, 11:39 AM
Still no trades?

basshead7890
01-21-2014, 11:41 AM
sooooo raising the price?
(post #21 (http://www.caraudio.com/forums/usertag.php?do=list&action=hash&hash=21) said $330 shipped...)

Sorry, I posted that in the wrong thread. That price was meant for my amps that I have for sale.


Still no trades?
Crescendo 3500 and I'll add cash

basshead7890
01-23-2014, 03:23 PM
bump.

basshead7890
01-24-2014, 11:18 PM
$258+ shipping

basshead7890
01-26-2014, 05:02 PM
bump