PDA

View Full Version : Old School Xtant SQ Amps!!



jayroles
11-26-2013, 01:06 AM
Item(s) for Sale:
Xtant 1001dx
Xtant 603x


Item(s) Description/Condition:
Xtant 1001dx - Number of Channels 1
Watts per Channel - 4 ohm 1x 250
Watts per channel - 2 ohm 1 x 500
Watts per channel - 1 ohm 1 x 1000

Xtant 603x - Number of channels 3
Watts per channel - 4 ohm 2 x 75 + 1 x 150
Watts per channel - 2 ohm 2 x 150 + 1 x 300
Features of 603x:

Fully Regulated PWM Power Supply
Complimentary MOSFET Design
Defeatable Balanced Input
Adjustable Input Sensitivity
24dB/Oct Low Pass, High Pass, Bandpass Crossover
RCA Outputs with 24dB/Oct Crossover
Left & Right Independent Gains
Adjustable Noise Gate
Passive Rear Channels

Price:
Xtant 1001dx: $500 obo shipped
Xtant 603x: $400 obo shipped


Item Pictures:
https://lh5.googleusercontent.com/-oVwN3ZY8Tjo/UpQ8hmWiE9I/AAAAAAAAAF0/dMPO5YqpSbY/w572-h762-no/photo.JPG(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

pickup1
11-26-2013, 06:17 AM
Just curious if you did research on your prices before you listed them?

keep_hope_alive
11-26-2013, 08:36 AM
https://lh5.googleusercontent.com/-oVwN3ZY8Tjo/UpQ8hmWiE9I/AAAAAAAAAF0/dMPO5YqpSbY/w572-h762-no/photo.JPG

covers look clean but you'll need a lot more pictures than those for the prices.

also, those could just be the covers with nothing inside since the cover screws are missing. right now there is no proof the amp internals are under the covers.

show the original packaging, manuals, and internal pics showing all screws, crossover cards and modules.

what SIPS do you have?

show pictures of it powered up, and ideally with a scope or DMM on the output channels to show they work.

good luck.

jayroles
11-27-2013, 12:29 PM
Sorry about that. The 603 has the rm8 module and for sips I think I have everything crossed at 80hz hpf and lpf. There are some around 120 hz but they're on the rear hpf channels which I wasn't using.
Both of the amps work perfectly. I will take a picture later of them powered up. I did research my prices before posting, and there's not too many of these around. I'll take off 100$ from each amp so 400$ shipped for the 1001dx and 300$ shipped for the 603x. Thanks for your help. I'm a noob. http://https://plus.google.com/app/basic/photos/112112281821447426228/album/5950990731117990865/5950990734349800466?cbp=1vojh7cj4m9lq&partnerid=gpmobile:ios&sview=1&cid=5&soc-app=115&soc-platform=1&spath=/app/basic/stream/z13nyxfrqznxedsiz04cgtwb3oanxdi5ti4&sparm=cbp%3D1swahbzzu5t69%26partnerid%3Dgpmobile:i os%26sview%3D32%26cid%3D5%26soc-app%3D115%26soc-platform%3D1%26spath%3D/app/basic/stream%26sparm%3Dcbp%253Dgraz4letdg5s%2526partneri d%253Dgpmobile:ios%2526sview%253D31%2526cid%253D5% 2526soc-app%253D115%2526soc-platform%253D1 http://https://plus.google.com/app/basic/photos/photo/112112281821447426228/5950990735713574354?cbp=19mc5wc9tw6g&sview=20&partnerid=gpmobile%3Aios&cid=5&soc-app=115&soc-platform=1&spath=%2Fapp%2Fbasic%2Fstream%2Fz13nyxfrqznxedsiz0 4cgtwb3oanxdi5ti4&sparm=cbp%3D1swahbzzu5t69%26partnerid%3Dgpmobile%3 Aios%26sview%3D32%26cid%3D5%26soc-app%3D115%26soc-platform%3D1%26spath%3D%2Fapp%2Fbasic%2Fstream%26s parm%3Dcbp%253Dgraz4letdg5s%2526partnerid%253Dgpmo bile%3Aios%2526sview%253D31%2526cid%253D5%2526soc-app%253D115%2526soc-platform%253D1&pct=ab&pcv=5950990731117990865 Also Is there a better way to post pictures on here rather than doing it through Google plus or something?