PDA

View Full Version : need design



blowthemup
11-01-2013, 08:12 PM
Need a ported enclosure design for 2 sundown audio sa-10s. Looking for 1.25^3 per sub tuned to 35hz. Max dimensions are 30x20x14. Is that enough room for dual chamber or should I go with a shared chamber? Wanting to build this weekend so need help putting a cut list together please. Would like to have a double baffle flush mount and need advice on bracing.

blowthemup
11-02-2013, 11:23 PM
Think I got this figured out using WinISD and google SketchUp. Outside box dimensions 30x19x14 with a port of 3x12.5x29.25. Leaves me at about 2.5^3net tuned to 35Hz. Have a cutlist together and would greatly appreciate it if someone would double check my numbers before starting. Based my math off using 15in^2 of port area per cubic foot with a desired net airspace of 2.5ft^3. Have a double baffle figured into the math also. Thanks guys!