PDA

View Full Version : tline enclosure for 6.5's (exodus anarchy)!!!!!



CerwinVega_Fan
10-25-2013, 08:14 PM
I literally just got a pair of 6.5 Exodus Anarchy Mids. I highly doubt they will fit in my doors and I'm satisfied with my daytons I have in my doors.

I want to try my new exodus mids in a tline box and see how well they do as a sub stage.

Any ideas?

Chriszle
10-25-2013, 08:21 PM
Reed Exodus Anarchy 25hz Tapped Horn (http://www.avsforum.com/t/1238398/reed-exodus-anarchy-25hz-tapped-horn)

CerwinVega_Fan
10-25-2013, 08:32 PM
Lol now all I need is someone to build it for me

03F150MrSBF
10-25-2013, 08:38 PM
Oooooo I wanna hear that!

CerwinVega_Fan
10-25-2013, 08:46 PM
Oooooo I wanna hear that!

Man Im so indecisive right now on what setup I'm want to go with, so I'm gonna try them all...

Single 12", 4 8s, and 2 6.5's.

bbeljefe
10-26-2013, 02:32 AM
I literally just got a pair of 6.5 Exodus Anarchy Mids. I highly doubt they will fit in my doors and I'm satisfied with my daytons I have in my doors.

I want to try my new exodus mids in a tline box and see how well they do as a sub stage.

Any ideas?

What are the Fs and Sd of the drivers?

phemps
10-26-2013, 03:05 AM
I wanna see it happen!

CerwinVega_Fan
10-26-2013, 03:41 PM
What are the Fs and Sd of the drivers?
SPECIFICATIONS

Fs = 45.8HZ
Qes = 0.48
Qms = 6.37
Qts = 0.44
Vas = 9.61L
Sd = 131cm^2
Xmax = 12.5 mm one-way
Re = 6.4 Ohms
Le = 0.84 mH
BL = 10.79 N/A
Power: 125W Approx: No IEC testing conducted
Spl = 84.7 dB/1W/1M
*



I wanna see it happen!

Oh it's gonna happen! If they don't do well in my car I will use the in some sort of home audio setup.

bbeljefe
10-26-2013, 07:05 PM
Those will do well in a line. You can make it 6.16' long to tune it to the drivers' Fs or, you could tune it a bit lower since you're planning to put them into sub stage use. Seven feet long would tune them to ~40, which would probably be really nice plus, they should still have some impact all the way down into the 20s, although frequency response is probably gonna hurt that.

CerwinVega_Fan
10-26-2013, 08:54 PM
Those will do well in a line. You can make it 6.16' long to tune it to the drivers' Fs or, you could tune it a bit lower since you're planning to put them into sub stage use. Seven feet long would tune them to ~40, which would probably be really nice plus, they should still have some impact all the way down into the 20s, although frequency response is probably gonna hurt that.

Build it for me :naughty:

hispls
10-26-2013, 09:11 PM
You should make that horn. There's a lot of work went into that and it seems really solid.

bbeljefe
10-26-2013, 10:11 PM
Build it for me :naughty:

I'd love to. I have a line for a custom built old school Earthquake Magma I built going to Orlando next week so why not build two? Or three? I've also got a couple of AB 6.5" subs I'd like to build one for so maybe I can design yours and mine at the same time... I think the ABs have a similar or slightly lower Fs and the Sd is probably real close.

CerwinVega_Fan
10-30-2013, 03:48 PM
You should make that horn. There's a lot of work went into that and it seems really solid.

I really want to. But I don't want to pay a fortune to have it built. I would try my luck and build it myself but I don't have the time, tools, or space to build it.


I'd love to. I have a line for a custom built old school Earthquake Magma I built going to Orlando next week so why not build two? Or three? I've also got a couple of AB 6.5" subs I'd like to build one for so maybe I can design yours and mine at the same time... I think the ABs have a similar or slightly lower Fs and the Sd is probably real close.

Let's make it happen!