PDA

View Full Version : Box design for crewcab silverado



Tyler_93
10-09-2013, 05:53 PM
I have an 05 crewcab silverado. I was thinking about raising the back seat 2" to fit a little bigger sub. When I raise the back seat up 2" it will of couse also move all the seat brackets up 2". So I was wondering how exactly y'all guys that did it make the sub box work? Did y'all just 2 .75" ring spacers to the box to add the added depth or did y'all get a box built or what? I'm trying to fit either 1 or 2 type r's or dc's depending on space available. Thanks in advance

Chaotic_Thought
10-09-2013, 06:19 PM
I lifted my 07 nnbs back seat by using 2" square tube, 1/4" thick sidewalls.

Tyler_93
10-09-2013, 06:22 PM
Sorry post wasn't clear.. I'm asking how to do the box to make it have the added depth.

mylows10
10-09-2013, 06:37 PM
Built mine firing forward. Raised the seat in my 97 extra cab 2.5" also with squate tubing but welded mine in Pics where the box will go would help. But mostley you'll have to build it in stages and keep test fitting as you go

Tyler_93
10-10-2013, 09:36 AM
I would like to have them fireing forward but even lifting the seat up 2" that only gives me like 9" in the front of the seat. I just wasn't sure what the other crewcab owners did after they lifted the seat.