PDA

View Full Version : Ipad Mini dash by 04Murdalanche



03F150MrSBF
10-07-2013, 12:31 AM
Man I hate to do this and was really hoping I didn't have to.

I had 04Murdalanche (Jeff) do a iPad mini dash for me. This started in February when we talked about it and ordered parts. He offered to help me out and I did it for him in return. After all, this is a hobby and if you can help someone out instead of asking for tons of money then great. And just so I put everything on the table I'll talk about what we helped out on.

-He offered to do my ipad dash. And started the work
- he ran and got me some 1/0 lugs from shop since I work late. (I paid, but he was willing to go so I really appreciated the help)
- offered to help me learn to glass and help with my a-pillars. He didn't do any work on these. But again I really appreciated the offer to help.

-I gave him some shok 1/0 (I think 14ft? For a - run to the back)
. i bought 2 ipad mini bezels from FiField Fab. (He paid me 50 for his and I covered the rest. Was like 6 or 7$ more so no biggie really)
. Made large decals for him for his enclosure in the silverado. And some smaller decal work.
. Gave him some blue LEDs wired up.
. Bought him some Glassing materials.
- resin , mat, and some jelly he wanted to try.

I think that was it but I may have missed some others. Feel free to add to the list Jeff. But keep it honest, and I'm doing my best to do the same.

February.
Got a game plan. Ordered parts. When parts came in we met up and looked at ideas on what we could do and agree on. He took both ipad mini bezels and my complete radio bezel dash. (Ac panels, airbag on/off switch) just so he had everything he needed to make it fit right.

Feb 2
http://i227.photobucket.com/albums/dd246/02galantmrsbf/7028E553-469E-4FF1-AADD-189D26167F98-2169-0000013BCD606BE8.jpg

Feb 10
http://i227.photobucket.com/albums/dd246/02galantmrsbf/8DED57ED-68F7-4F89-A8F6-C388CB94A90B-4538-00000226AE475FD6.jpg

Feb 11
http://i227.photobucket.com/albums/dd246/02galantmrsbf/9CFC9B69-2CCF-48B3-B88E-CC9E7FCE2D62-4848-00000244C4A8980D.jpg
http://i227.photobucket.com/albums/dd246/02galantmrsbf/53245CE4-B143-42A8-8442-976BFA06D24C-4848-00000244CA7CEEC3.jpg
http://i227.photobucket.com/albums/dd246/02galantmrsbf/E6ED06D5-A60E-410C-8ED7-FDE993793B53-4848-000002449BE196B8.jpg
http://i227.photobucket.com/albums/dd246/02galantmrsbf/CC2D5726-BEB2-4467-BBB6-E47B2B0E7294-4848-000002447ADC7195.jpg

Feb 13
http://i227.photobucket.com/albums/dd246/02galantmrsbf/933DDA3D-5D60-4FA3-9866-C67F0F4D4405-2853-0000016D17B563C2.jpg
http://i227.photobucket.com/albums/dd246/02galantmrsbf/270A31E5-8839-4736-A9E1-137B65D1914E-2853-0000016E5A4DA548.jpg

Fast forward

March
April
May
June
July
Aug

Starting from about May, he's been saying he's basically done and should have it out to me no later then next week. Multiple times. I have texts I can include if needed. But I'm just showing work so I didn't include them.

Finally received the dash OCTOBER 5th
http://i227.photobucket.com/albums/dd246/02galantmrsbf/578C0662-FC81-4920-9CE4-12054520C700-630-0000006A83DE8BCD_zpscc3da7af.jpg
http://i227.photobucket.com/albums/dd246/02galantmrsbf/29DE22F8-C28C-4BA7-8041-CD4E6AB11D8E-630-0000006A8921A4F3_zps61db4a56.jpg

(10 pic limit, to be continued)

03F150MrSBF
10-07-2013, 12:32 AM
http://i227.photobucket.com/albums/dd246/02galantmrsbf/7F90C08F-5583-4D16-8E56-5648EF2CAC33-630-0000006A94DFABBA_zps28efd0ba.jpg
http://i227.photobucket.com/albums/dd246/02galantmrsbf/BB925494-0DDA-432B-B0C7-E91FA5E7176E-630-0000006AA67DA905_zpsd1969044.jpg
http://i227.photobucket.com/albums/dd246/02galantmrsbf/BFFB8C6B-490D-4304-A094-2217055DB969-630-0000006AB172FF89_zps5f8b8579.jpg
http://i227.photobucket.com/albums/dd246/02galantmrsbf/6A72F71E-E181-46AA-8D5F-33842B6875C6-630-0000006AAC51678D_zps3bb0e190.jpg
http://i227.photobucket.com/albums/dd246/02galantmrsbf/818A5BEB-44B8-4992-92F0-2235660B6843-630-0000006ABBD0D75F_zps9c7e0fee.jpg
http://i227.photobucket.com/albums/dd246/02galantmrsbf/DF8BF3E5-1DAF-4B78-8059-07399D665519-630-0000006AC528037C_zpsa47e7406.jpg
http://i227.photobucket.com/albums/dd246/02galantmrsbf/99E4FF15-6006-4BDA-97D0-DF3C91831210-630-0000006ACA3DBC78_zpsaad20587.jpg
http://i227.photobucket.com/albums/dd246/02galantmrsbf/1F4BA193-0B57-4DFD-B806-C1F9ADCCC5A5-630-0000006AC075A26F_zps4de376dc.jpg
http://i227.photobucket.com/albums/dd246/02galantmrsbf/4EECEFD0-8C4B-45C3-B79F-A986851FBE63-630-0000006AB714676B_zpse063c240.jpg
http://i227.photobucket.com/albums/dd246/02galantmrsbf/7F90C08F-5583-4D16-8E56-5648EF2CAC33-630-0000006A94DFABBA_zps208719d6.jpg

The ipad bezel isn't moving. He did good in securing that. He said he used bondo to do the body work from ipad bezel to radio dash, but it's flaky. It's not solid at all. It's soft and still flexible. It's more of a putty then bondo. I've worked with bondo and this isn't it. If it is then the mixture was off and he didn't apply much hardener. The sides are lumply in areas and have divots in others. By no means smooth. The transitions are non existent. You can see the levels and can tell no transitions were even attempted. The back of the dash you can obviously see what's going on back there. Nothing was attempted. Nothing. And yes. You do see a gap from my top view. That isn't lighting or other excuses that I've seem him use. In the case of SilveradoSS pods. Or bad resin (like in Timmy's case) , cause I don't think he used any.

I can take closer pics of the lumps and divots if you all want to examine it. I'll even pop my macro lens and get some real close ups. And some area have chunks missing. I looked around in the box but no pieces. So I believe it left his hands that way.

Like the others have said, he's a nice guy to bullshit with but this is absolute crap. And I told him that. The only thing he could tell me was that there was nothing he could do in the back cause moving parts. And he realized fiberglass doesn't stick to plastic. I also told him that he hasn't done much besides the body work from feb to today. All he said was that he beefed up the glue or whatever he used to bond the adapter to my dash. Yup that's it.
I didn't want to see this turn this way. And I didn't think he would do that to me since we chilled and shot the **** when I was working in Oklahoma. I'm back home in Texas now and this is what I receive after waiting most of the year. Great huh?

You really fvcked me Jeff. Held on to my sh.t that long to give me a unfinished product. You say all I need to do it cut this and that, when you had all those parts to make it fit. You'll probably say I don't glass so I don't know what problems you may have encountered. But I did try and you've seen my results. That looked better in my opinion this this.



So I'll leave this post take its toll. But this is my experience with 04Murdalanche

Sorry man. I was hoping you didn't fvck me like you did the others. But you did without regret. And I do believe you'll do it again by the way you've conducted yourself on other topics. Especially since these people on here have no face, no personality that you experience in person. I met you, we chilled, shot the ****, even went to dinner. And you still fvcked me. You'd do it to anybody.

03F150MrSBF
10-07-2013, 12:33 AM
And this didn't fit cause pic limit but

This is my Glassing attempt just so you guys know what I showed him.
http://i227.photobucket.com/albums/dd246/02galantmrsbf/CarAudio/ABEEFBA7-88AA-411C-B64A-06593A7047BD-663-0000005D0B8AD190.jpg

jrdnhsnbrg
10-07-2013, 12:36 AM
Really... Can't wait to see what you have to say about the rest. My 13 y/o brother coulda cut up the trim and superglued the bezel on to look the same.

jrdnhsnbrg
10-07-2013, 12:39 AM
I've seen more horror stories with this guy than I have products that have actually turned out well... This is sad.

thatguy12
10-07-2013, 12:45 AM
thats straight up bad

raptor727
10-07-2013, 12:46 AM
**** bro, that is **** poor work...

jrdnhsnbrg
10-07-2013, 12:48 AM
By the way OP your first glassing attempt turned out amazing! Looks great!

03F150MrSBF
10-07-2013, 12:49 AM
Yeah. I'm pretty disappointed how this whole ordeal turned out. I work on the pipeline wherever that may be. And to meet like minded people in the same city I happen to arrive at is a bonus! After seeing Timmy13091 and Silverado SS builds I admit I was worried. But didn't think he would fvck me. Like I said, we actually met and chilled a little.

jrdnhsnbrg
10-07-2013, 12:50 AM
Yeah. I'm pretty disappointed how this whole ordeal turned out. I work on the pipeline wherever that may be. And to meet like minded people in the same city I happen to arrive at is a bonus! After seeing Timmy13091 and Silverado SS builds I admit I was worried. But didn't think he would fvck me. Like I said, we actually met and chilled a little.

Did he at any point tell you to bite the pillow? :naughty:

03F150MrSBF
10-07-2013, 12:54 AM
Thanks. I was pretty happy with the pillars. I had my midrange and tweet just sitting on my dash for the longest! I was super excited to get these done. AND I was getting a custom dash? Sh.t , thought I hit the lottery. I was super excited! My project last a long time cause no time because I have a family too. Or lack of funds for a actual shop to do it for me. I was quoted 250ish each panel from a shop when I was in S.Texas working. I didn't have funds for that. So a year later, I bought spare pillars and tried it out! I was really motivated cause I thought I was getting a ****** dash back and didn't want my speakers just sitting on top of my dash with double sided tape lol.

03F150MrSBF
10-07-2013, 12:56 AM
Nope. No pillow biting. Or lube.

03F150MrSBF
10-07-2013, 12:59 AM
Oh and I did all my glass work in the field!!! I do surveying so I had time to fiddle around with stuff. Or sleep. So I did it all with tools I had in my work truck.

Pillars drying on the ROW. I did several layers of build prime and spot glazing to get rid of pinholes since I was painting to my oem color.
http://i227.photobucket.com/albums/dd246/02galantmrsbf/CarAudio/E6588615-ED59-4E7C-B55B-5E1E8024C4B0-304-0000001E43B23919.jpg

raptor727
10-07-2013, 12:59 AM
That looks terrible.. care to explain 04murdalanche ;

raptor727
10-07-2013, 01:01 AM
THe pillars loom great man

Jes 42
10-07-2013, 01:02 AM
Did he at any point tell you to bite the pillow? :naughty:

:inlove:

Slo_Ride
10-07-2013, 01:02 AM
That looks terrible.. care to explain 04murdalanche ;

you're doing it wrong

oic ninja edit. good job! :)

Timmy13091
10-07-2013, 01:04 AM
That looks terrible.. care to explain 04murdalanche ;

Give him a little he needs to make something up

Jes 42
10-07-2013, 01:05 AM
Nope. No pillow biting. Or lube.

Ouch..Sad to see this AGAIN.Tuned in for explanation or lack of.Sorry it turned out this way for you.

03F150MrSBF
10-07-2013, 01:10 AM
Ouch..Sad to see this AGAIN.Tuned in for explanation or lack of.Sorry it turned out this way for you.

Yeah again. *****. Honestly I been reading all the other problems and I thought it was out of his character. But then seeing the responses... It confirmed everything y'all were saying. And being on the defensive is one thing, but to laugh about it? C'mon now.

---------- Post added at 11:10 PM ---------- Previous post was at 11:09 PM ----------


Give him a little he needs to make something up

You think so?

Silverado SS
10-07-2013, 01:12 AM
Here we go again...

03F150MrSBF
10-07-2013, 01:14 AM
Here we go again...

Yep. I wanted to present as many facts as I could. So it took me a little while to get the pics and wording. I'll go full retard, lol, but I wanted to use this to show his work and help others in their decision on who to let help them on their projects.

Slo_Ride
10-07-2013, 01:15 AM
so how many of you are going to continue to to give him work? I've stayed out of this but this is getting ridiculous.

Silverado SS
10-07-2013, 01:16 AM
Yep. I wanted to present as many facts as I could. So it took me a little while to get the pics and wording. I'll go full retard, lol, but I wanted to use this to show his work and help others in their decision on who to let help them on their projects.
Yeah I hear ya I PMd you back a while ago for the other questions you asked

Slo_Ride
10-07-2013, 01:16 AM
Yep. I wanted to present as many facts as I could. So it took me a little while to get the pics and wording. I'll go full retard, lol, but I wanted to use this to show his work and help others in their decision on who to let help them on their projects.

loving the christopher titus show yesteday, I'm in for full retard!!!!!!!!!!!!!!!!!!

basswiigee
10-07-2013, 01:22 AM
how do you even explain that?

Jes 42
10-07-2013, 01:22 AM
Yeah again. *****. Honestly I been reading all the other problems and I thought it was out of his character. But then seeing the responses... It confirmed everything y'all were saying. And being on the defensive is one thing, but to laugh about it? C'mon now.

---------- Post added at 11:10 PM ---------- Previous post was at 11:09 PM ----------



You think so?

Hopefully he don't blame you too.How much are you out on all this if you don't mind me asking?

Silverado SS
10-07-2013, 01:24 AM
so how many of you are going to continue to to give him work? I've stayed out of this but this is getting ridiculous.

You have to understand Timmy didn't come out with his.problem right away he didn't let it be known so some of us have given him work before we saw or heard about these that's why. Timmy didn't say **** for what about a month?

03F150MrSBF
10-07-2013, 01:24 AM
so how many of you are going to continue to to give him work? I've stayed out of this but this is getting ridiculous.

Yeah I hear you on this. But he's had this job since Feb. It's October. I wouldn't put myself in this situation again if I knew what I know now. We can put it that way

Silverado SS
10-07-2013, 01:26 AM
how do you even explain that?

F150 Gave him the wrong jigsaw and wrong glue its your fault F150

03F150MrSBF
10-07-2013, 01:29 AM
Hopefully he don't blame you too.How much are you out on all this if you don't mind me asking?

I'm out that wire I gave him and cost of supplies he said he would use. And other things here and there I helped him out with. But this was more of trades rather then monetary exchange. Nowhere near as much as the other guys. But 10$ or 1000$. I don't like losing money and not gaining anything.

Only time I don't mind getting fvcked is at the casino and that's because my wife enjoys it lol

03F150MrSBF
10-07-2013, 01:30 AM
F150 Gave him the wrong jigsaw and wrong glue its your fault F150

lol nah I gave him my OEM dash. That was the wrong part I gave. :crazy:

Jes 42
10-07-2013, 01:30 AM
I'm out that wire I gave him and cost of supplies he said he would use. And other things here and there I helped him out with. But this was more of trades rather then monetary exchange. Nowhere near as much as the other guys. But 10$ or 1000$. I don't like losing money and not gaining anything.

Only time I don't mind getting fvcked is at the casino and that's because my wife enjoys it lol

True that.You def deserve more than the garbage you got.

Slo_Ride
10-07-2013, 01:32 AM
You have to understand Timmy didn't come out with his.problem right away he didn't let it be known so some of us have given him work before we saw or heard about these that's why. Timmy didn't say **** for what about a month?


Yeah I hear you on this. But he's had this job since Feb. It's October. I wouldn't put myself in this situation again if I knew what I know now. We can put it that way
understand on your part. murdapanel should not be allowed further transactions. mods?

Silverado SS
10-07-2013, 01:33 AM
lol nah I gave him my OEM dash. That was the wrong part I gave. :crazy:

Was a joke since he said Timmy gave him ****** supplies

Dmac1991
10-07-2013, 01:33 AM
smh. People continue giving this clown money/work?

Silverado SS
10-07-2013, 01:36 AM
smh. People continue giving this clown money/work?

Read my post on the last page addressed to Slo Ride

Jes 42
10-07-2013, 01:37 AM
smh. People continue giving this clown money/work?

Thats what 04 claims..lol

Dmac1991
10-07-2013, 01:39 AM
Read my post on the last page addressed to Slo Ride

hmm I see.

03F150MrSBF
10-07-2013, 01:41 AM
Was a joke since he said Timmy gave him ****** supplies

Yeah I know. But I was serious... Shouldn't of gave him my dash after seeing this :banghead:
I've been driving with a big *** hole in my dash. Not se xy . At all
http://i227.photobucket.com/albums/dd246/02galantmrsbf/CarAudio/C4841B22-100F-40FB-BD59-B5634344C0EB-1213-0000006EF0203F26.jpg

Oh yeah. Also look at my center console. I was soooo excited about my bad as s new dash and happy with how my a pillars came out. I did more work and customized my console to take my deck. This is not perfect at all. Matter of fact I will remove it and sand some more. I have some pinholes I'm not happy with. BUT it still looks decent in my eyes and I did it. Satisfying. I did this at work too.

http://i227.photobucket.com/albums/dd246/02galantmrsbf/CarAudio/537E44EA-92B6-442B-9E00-FFAB2929525E-5486-0000035EF9888D0D.jpg

Silverado SS
10-07-2013, 01:43 AM
Yeah I know. But I was serious... Shouldn't of gave him my dash after seeing this :banghead:
I've been driving with a big *** hole in my dash. Not se xy . At all
http://i227.photobucket.com/albums/dd246/02galantmrsbf/CarAudio/C4841B22-100F-40FB-BD59-B5634344C0EB-1213-0000006EF0203F26.jpg

Oh yeah. Also look at my center console. I was soooo excited about my bad as s new dash and happy with how my a pillars came out. I did more work and customized my console to take my deck. This is not perfect at all. Matter of fact I will remove it and sand some more. I have some pinholes I'm not happy with. BUT it still looks decent in my eyes and I did it. Satisfying. I did this at work too.

http://i227.photobucket.com/albums/dd246/02galantmrsbf/CarAudio/537E44EA-92B6-442B-9E00-FFAB2929525E-5486-0000035EF9888D0D.jpg

Angle that son of a ***** up so you can read the pio

NASTY08IMPALA
10-07-2013, 01:43 AM
Jeff , im not.gona sit here amd bash you bc i kno u got alot goin on and.ur a kid ..but its still no excuse ...yes the work is hack and thats all ill say...i hate seeimg.ppl rip u a new azzhole so plz take some time away from this learn how to glass and do basic mud work and finishing sanding correctly at the least ..maybe take some auto body classes somethig ..and then come back with some good quality work bro

03F150MrSBF
10-07-2013, 01:44 AM
smh. People continue giving this clown money/work?

:suicide:

03F150MrSBF
10-07-2013, 01:47 AM
Angle that son of a ***** up so you can read the pio

It's angled pretty good from my seat. CDs load and eject no problem. Display is easy to read anytime of the day. I have another idea once I get this dash thing figured out. But I'm happy with how it sits.

PapaGeno21
10-07-2013, 01:50 AM
Holy ****.

That is BAD. Like that is ******* HORRIBLE.

Jes 42
10-07-2013, 01:55 AM
Jeff , im not.gona sit here amd bash you bc i kno u got alot goin on and.ur a kid ..but its still no excuse ...yes the work is hack and thats all ill say...i hate seeimg.ppl rip u a new azzhole so plz take some time away from this learn how to glass and do basic mud work and finishing sanding correctly at the least ..maybe take some auto body classes somethig ..and then come back with some good quality work bro

Agree to a point but what about the guys that got their azzholes reamed?Would think some effort to repay would be in order.

Slo_Ride
10-07-2013, 01:55 AM
how come none of the folks that run this site never chime in to any of these threads?

Dmac1991
10-07-2013, 01:58 AM
how come none of the folks that run this site never chime in to any of these threads?

it ain't their money or equipment being fucked over, that's why

Jes 42
10-07-2013, 01:58 AM
it ain't their money or equipment being fucked over, that's why

This^^^^

blockburner
10-07-2013, 01:59 AM
You have to understand Timmy didn't come out with his.problem right away he didn't let it be known so some of us have given him work before we saw or heard about these that's why. Timmy didn't say **** for what about a month?
If Im not mistaken, Timmy didn't say anything because he was hoping murder plastic would fix the bullshit that he sent pics to timmy of. Also timmy didnt want dude to just throw his **** away as he needed the panels

OP I feel sorry for you and anyone else that is or has gotten work done by this HACK. He found a scheme alright. But good things happen to those who wait. He will get his in the end. Hell everyone knows what he drives. Its all just a matter of time. OP I also hate to say this but that bezel looks like pure un-adulterated a$$

I feel this should be moved to the negative feedback section as well. MOD PLEASE

PapaGeno21
10-07-2013, 01:59 AM
Hey jeff can you install an Ipad into my dash and setup my doors so I can have 4 6.5" woofers in each one? I will supply the incorrect resin mix for you and also the bedliner to cover your mistakes. I could also include some duct tape as well.

Silverado SS
10-07-2013, 01:59 AM
Jeff , im not.gona sit here amd bash you bc i kno u got alot goin on and.ur a kid ..but its still no excuse ...yes the work is hack and thats all ill say...i hate seeimg.ppl rip u a new azzhole so plz take some time away from this learn how to glass and do basic mud work and finishing sanding correctly at the least ..maybe take some auto body classes somethig ..and then come back with some good quality work bro

If he has a lot going on he should deny the work and not hurry up and finish it in what looks to be 5 minutes

PapaGeno21
10-07-2013, 02:01 AM
he was hoping murder plastic would fix the

That made me literally LOL

Dmac1991
10-07-2013, 02:01 AM
**** Ima hit him up and see if he'll put screens in my bumper for me. Don't even have to worry about them not being able to mount back up because I'll just ride around with NO FUCKIN BUMPER if need be

Slo_Ride
10-07-2013, 02:02 AM
it ain't their money or equipment being fucked over, that's why


This^^^^

call em out then. im an old timer i dont know how. calling all mods.

NASTY08IMPALA
10-07-2013, 02:04 AM
If he has a lot going on he should deny the work and not hurry up and finish it in what looks to be 5 minutes

No he shouldnt be doimg.the work period ..he doesnt know how to do basic work .

jrdnhsnbrg
10-07-2013, 02:05 AM
whitedragon551 ; I think?

blockburner
10-07-2013, 02:06 AM
If Im not mistaken, Timmy didn't say anything because he was hoping murder plastic would fix the bullshit that he sent pics to timmy of. Also timmy didnt want dude to just throw his **** away as he needed the panels

OP I feel sorry for you and anyone else that is or has gotten work done by this HACK. He found a scheme alright. But good things happen to those who wait. He will get his in the end. Hell everyone knows what he drives. Its all just a matter of time. OP I also hate to say this but that bezel looks like pure un-adulterated a$$

I feel this should be moved to the negative feedback section as well. MOD PLEASE
@ whitedragon551

blockburner
10-07-2013, 02:11 AM
Jeff , im not.gona sit here amd bash you bc i kno u got alot goin on and.ur a kid ..but its still no excuse ...yes the work is hack and thats all ill say...i hate seeimg.ppl rip u a new azzhole but you most definately deserve it with a beating on top so plz take some time away from this learn how to glass and do basic mud work and finishing sanding correctly at the least ..maybe take some auto body classes somethig ..and then come back with some good quality work bro
I fixed it for ya :blackeye:

03F150MrSBF
10-07-2013, 02:15 AM
Hey jeff can you install an Ipad into my dash and setup my doors so I can have 4 6.5" woofers in each one? I will supply the incorrect resin mix for you and also the bedliner to cover your mistakes. I could also include some duct tape as well.




**** Ima hit him up and see if he'll put screens in my bumper for me. Don't even have to worry about them not being able to mount back up because I'll just ride around with NO FUCKIN BUMPER if need be

:laugh:

03F150MrSBF
10-07-2013, 02:19 AM
If he has a lot going on he should deny the work and not hurry up and finish it in what looks to be 5 minutes

Yeah I asked him plenty of times for pics and updates on progress the whole time. Sometimes I wouldn't get a response for days.he told me he spent time working on it, but from the first day he started till yesterday when I received it, I see little progress. Just that little bit of putty. So 5 mins may be accurate.

Dmac1991
10-07-2013, 02:20 AM
pro-rabbit ; can we ban this guy

momax_powers
10-07-2013, 02:20 AM
8 months to cut a hole and put 4 dabs of glue and get a bunch a free ****...hes got a great scheme going

whytellyou2
10-07-2013, 02:29 AM
Imagine all the local people getting fucked by him that we don't know about.

blockburner
10-07-2013, 02:30 AM
Imagine all the local people getting fucked by him that we don't know about.

I highly doubt he is doing work for anyone local

whytellyou2
10-07-2013, 02:32 AM
I highly doubt he is doing work for anyone local

You might be right, It seems like that would be a risk to his health.

CandeShop
10-07-2013, 02:34 AM
Yeah I asked him plenty of times for pics and updates on progress the whole time. Sometimes I wouldn't get a response for days.he told me he spent time working on it, but from the first day he started till yesterday when I received it, I see little progress. Just that little bit of putty. So 5 mins may be accurate.

Check your Pm's bro. I'd like to correct your situation. Not because I back that dude at all, but because I don't mind helping people out and practicing my craft.

Jes 42
10-07-2013, 02:39 AM
Check your Pm's bro. I'd like to correct your situation. Not because I back that dude at all, but because I don't mind helping people out and practicing my craft.

:thumbcool:

Silverado SS
10-07-2013, 02:43 AM
https://www.youtube.com/watch?v=ee925OTFBCA&feature=youtube_gdata_player

murph
10-07-2013, 02:52 AM
http://www.youtube.com/watch?v=RTSyclIKtvQ

The Original WTF BOOM Montage - YouTube (http://www.youtube.com/watch?v=RTSyclIKtvQ)

Timmy13091
10-07-2013, 03:00 AM
https://www.youtube.com/watch?v=ee925otfbca&feature=youtube_gdata_player

lmfao!!!!!!!

Jes 42
10-07-2013, 03:02 AM
https://www.youtube.com/watch?v=ee925OTFBCA&feature=youtube_gdata_player

:offwall:

phemps
10-07-2013, 03:37 AM
Jesus this guys work is bullshit

SounDrive
10-07-2013, 03:43 AM
One, two, three strikes you're out.

This guy is the new Kevin. All he has to do now is rip off somebody else's products and selling them

Jeffdachef
10-07-2013, 05:11 AM
dude op, i'd rather pay you to do my glassing job than that dude....

DB-Audio
10-07-2013, 07:23 AM
**** I do better work than that and i dont have time sorry op that he screwed you hope he makes it right

whitedragon551
10-07-2013, 11:46 AM
03F150MrSBF I hope you have this guys contact information. He has been banned from this site.

PapaGeno21
10-07-2013, 11:59 AM
03F150MrSBF I hope you have this guys contact information. He has been banned from this site.

THIS was a very good call. Protect the future members from getting the shaft.

pickup1
10-07-2013, 12:59 PM
Was going to have him make me some kicks,wonder how long that would have taken...

Jes 42
10-07-2013, 01:10 PM
Was going to have him make me some kicks,wonder how long that would have taken...

Think 4-8 months is the average wait time...lol

03F150MrSBF
10-07-2013, 01:19 PM
***** he wasn't able to comment on this subject. I know sometimes people are more willing to communicate or "defend" themselves on a public forum. But indeed it'll help other members avoid this awesome craftsmanship. I'm afraid he won't make anything right for anyone. He seems like he relies on turnarounds. Meaning. He says he didn't ship my stuff because he was waiting on silverado to send payment. He probably accepted SilveradoSS job after he received payment from Timmy. Timmy's gear is sold already I'm sure. He does. Lot of selling and trading.

If anyone needs his number I have his contact info. So if anyone else has work out to him and don't have a number I can help.

Timmy13091
10-07-2013, 01:32 PM
***** he wasn't able to comment on this subject. I know sometimes people are more willing to communicate or "defend" themselves on a public forum. But indeed it'll help other members avoid this awesome craftsmanship. I'm afraid he won't make anything right for anyone. He seems like he relies on turnarounds. Meaning. He says he didn't ship my stuff because he was waiting on silverado to send payment. He probably accepted SilveradoSS job after he received payment from Timmy. Timmy's gear is sold already I'm sure. He does. Lot of selling and trading.

If anyone needs his number I have his contact info. So if anyone else has work out to him and don't have a number I can help.

The gear isn't sold its in his truck .. And if he wasn't a pos he'd if sent it back

03F150MrSBF
10-07-2013, 01:59 PM
Sh.tty

Audio4ever
10-07-2013, 04:32 PM
Makes me wanna give glassing a try now ill keep sum liner on hand tho

brandonkain82
10-07-2013, 06:32 PM
I have this nut sacs number. Wow.

Audio4ever
10-07-2013, 07:28 PM
But how can ppl go to him after seein his previous work and expect him to do a better job

jrdnhsnbrg
10-07-2013, 08:37 PM
But how can ppl go to him after seein his previous work and expect him to do a better job

F150 gave him the dash back in February, before the fiasco with Timmy and Silverado started, or at least pretty close to the same time.

03F150MrSBF
10-07-2013, 11:07 PM
Yeah he's had my dash forevvvvvvvvvver. I asked him from time to time About it. Few times every month. But I knew he had school and then school was out and he went home where all his tools are. But still nothing. Then I seen the other jobs he did and posted about on FB and was asking him wtf is going on with MY work . He dodged all the time. But I didn't really say anything to **** him off as he had my dash and electronics that go in the dash. I wanted those back for sure. I posted this the day after I received the item. And I was sure to tell him first, so he know what I thought about it. But all I got were more excuses. Bad ordeal really. I'm still upset about it. And every time I pass by that piece it really frustrates me. This just turned out bad. I hope he learns the craft before talking all big like he knows exactly what's going on.

Kinda bummed now :crap:

Audio4ever
10-07-2013, 11:19 PM
He ever post up personal work for his own vehicle?

12voltz+-
10-07-2013, 11:30 PM
http://anniemachon.ch/wp-content/uploads/turd.png

yess

03F150MrSBF
10-07-2013, 11:52 PM
Yeah he posted some of his door panels. They are bedlinered, and besides the finish, it doesn't look bad. Now who knows how the work looks. It's coated over pretty good. But that was his theme I was told. Black and white. That was in his silverado. I never seen his hoe in person.