PDA

View Full Version : I got a problem. Box may be too small.



Pyrofan
09-25-2013, 08:53 PM
So, i got two Sa-8s. Made a sealed box and all. It came out to be .7^3ft before sub displacement. I looked online and read the subs were .8 of displacement. Well, i put that in as .08 not .8. So i think my box is too small. I dont wanna rebuild it cause it was hard to build but it seems like i gotta. So, i need help designing a box. Its going under the seat of a 2011 F150. Id love ported but i cant design that. All help would be greatly appreciated.

whitedragon551
09-25-2013, 09:12 PM
Remove subs from the box, put in some polyfill, and put subs back in. Problem solved.

Knowmadic
09-25-2013, 09:17 PM
Are you asking because they sound bad or because your concerned your box isn't "perfect"?

bbeljefe
09-25-2013, 09:21 PM
SA-8s only displace .08 cubic feet so you don't have a box problem, you have either an addition problem or a seeing problem. ;-)

phemps
09-25-2013, 09:24 PM
Aint no 8s taking up .8 hah your your good to go you must have got it right the first time

Slo_Ride
09-25-2013, 09:43 PM
Box will be fine. After you have this one completed and installed I would start working on a ported box.

Pyrofan
09-26-2013, 08:14 AM
Ok, good. I wish Sundown would put the displacement on their website. I read the first time they were .08 then someone said that was wrong. ( they said .8) So im good? Whats the smallest a box could be with two 8's. I measured the actual box and not the cad and i got closer to .65. Im i still good. Would some Poly help?

DukeNut
09-27-2013, 12:55 AM
The displacement is on Sundown's site, you just need to look under the Enclosure Recommendations for the SA series. It states:
Displacement - 0.08 ft^3 per sub. Recommended box size Sealed- 0.28 ft^3 per sub and Ported -0.5-0.75 ft^3 @ 35hz per sub.

bbeljefe
09-27-2013, 12:59 AM
.65 is fine. If you want it to hit lower, use Acousta Stuff or build a ported box.

Dirtrider4eva
09-30-2013, 01:12 PM
invtert them lulz