PDA

View Full Version : Amp help



PNILLZ
09-24-2013, 06:20 PM
I have a db drive dual 600w max sub box and an okur 1000.1 amp, I have had this same setup for about 2.5 years. Recently the amp had been going into protection mode I checked all the wires, fuses, connections, and for corrosion, but it kept going to protect. I played the amp by itself for a few days and it was fine. Then I connected the subs back and it fucked up again, then I just connected one sub and its been playing fine. Does anyone know what the problem could be?

mylows10
09-24-2013, 06:25 PM
Bad sub

Chevy Blazin'
09-24-2013, 06:42 PM
Bad sub
Totally agree
unless the wiring to the subs is wrong check your ohm load for both of the subs

mylows10
09-24-2013, 06:55 PM
Totally agree
unless the wiring to the subs is wrong check your ohm load for both of the subs

He said he's been running them for 2.5 years and now has the issue. Bad sub / coil is more likely the problem

PNILLZ
09-24-2013, 09:57 PM
He said he's been running them for 2.5 years and now has the issue. Bad sub / coil is more likely the problem

So I should just get new subs?

Side Show
09-24-2013, 10:09 PM
check your sub wiring, one tinsel lead might be bugger'd or a loose or dodgy terminal on one of the subs, worth checking.