Gauntlet
05-18-2004, 09:19 PM
Been working on these for the past 2 weekends for a buddy of mine....
The areas taped off
http://home.cwru.edu/~pwb4/pics/1.jpg
One side glassed
http://home.cwru.edu/~pwb4/pics/2.jpg
Me glassing the other side
http://home.cwru.edu/~pwb4/pics/3.jpg
Both sides finished
http://home.cwru.edu/~pwb4/pics/4.jpg
Me adding another layer
http://home.cwru.edu/~pwb4/pics/5.jpg
Baffles cut out and routed
http://home.cwru.edu/~pwb4/pics/6.jpg
Me adding dowels
http://home.cwru.edu/~pwb4/pics/7.jpg
Having some fun with resin, entirely too much hardener, and plastic
http://home.cwru.edu/~pwb4/pics/8.jpg
Baffles mounted
http://home.cwru.edu/~pwb4/pics/9.jpg
A skunk running around in the middle of the day
http://home.cwru.edu/~pwb4/pics/10.jpg
Fleeced
http://home.cwru.edu/~pwb4/pics/11.jpg
Me putting resin on the fleece
http://home.cwru.edu/~pwb4/pics/12.jpg
A poor butterfly encased in fiberglass resin
http://home.cwru.edu/~pwb4/pics/13.jpg
Me sanding
http://home.cwru.edu/~pwb4/pics/14.jpg
A clean work area is a happy work area
http://home.cwru.edu/~pwb4/pics/15.jpg
Covered and finished
http://home.cwru.edu/~pwb4/pics/16.jpg
Half-installed
http://home.cwru.edu/~pwb4/pics/18.jpg
http://home.cwru.edu/~pwb4/pics/19.jpg
Still gotta finish a few things, build an amp rack, and clean up the wiring, its a little messy
http://home.cwru.edu/~pwb4/pics/17.jpg
The areas taped off
http://home.cwru.edu/~pwb4/pics/1.jpg
One side glassed
http://home.cwru.edu/~pwb4/pics/2.jpg
Me glassing the other side
http://home.cwru.edu/~pwb4/pics/3.jpg
Both sides finished
http://home.cwru.edu/~pwb4/pics/4.jpg
Me adding another layer
http://home.cwru.edu/~pwb4/pics/5.jpg
Baffles cut out and routed
http://home.cwru.edu/~pwb4/pics/6.jpg
Me adding dowels
http://home.cwru.edu/~pwb4/pics/7.jpg
Having some fun with resin, entirely too much hardener, and plastic
http://home.cwru.edu/~pwb4/pics/8.jpg
Baffles mounted
http://home.cwru.edu/~pwb4/pics/9.jpg
A skunk running around in the middle of the day
http://home.cwru.edu/~pwb4/pics/10.jpg
Fleeced
http://home.cwru.edu/~pwb4/pics/11.jpg
Me putting resin on the fleece
http://home.cwru.edu/~pwb4/pics/12.jpg
A poor butterfly encased in fiberglass resin
http://home.cwru.edu/~pwb4/pics/13.jpg
Me sanding
http://home.cwru.edu/~pwb4/pics/14.jpg
A clean work area is a happy work area
http://home.cwru.edu/~pwb4/pics/15.jpg
Covered and finished
http://home.cwru.edu/~pwb4/pics/16.jpg
Half-installed
http://home.cwru.edu/~pwb4/pics/18.jpg
http://home.cwru.edu/~pwb4/pics/19.jpg
Still gotta finish a few things, build an amp rack, and clean up the wiring, its a little messy
http://home.cwru.edu/~pwb4/pics/17.jpg