Caddy

09-03-2013, 10:21 AM

I am a little rusty with my math. Is there anyone who can help me determine where to start my bend so i can accurately get a 2 inch port.

View Full Version : Kerf port

Caddy

09-03-2013, 10:21 AM

I am a little rusty with my math. Is there anyone who can help me determine where to start my bend so i can accurately get a 2 inch port.

Full Tilt

09-03-2013, 10:54 AM

I dunno if you've read http://www.caraudio.com/forums/enclosure-design-construction-help/531017-kerfing-101-how-kerf-mdf-curved-port-applications.html <-- that, but there's a video in there that explains all the math and how to go about creating the kerf.

mklett33

09-03-2013, 02:08 PM

I am a little rusty with my math. Is there anyone who can help me determine where to start my bend so i can accurately get a 2 inch port.

When you say 2" do you mean the radius of the curve? If so good luck, that's super small. I would say 3" radius is probably the smallest you can go. Def check out the link that was posted, that guy is a genius!

When you say 2" do you mean the radius of the curve? If so good luck, that's super small. I would say 3" radius is probably the smallest you can go. Def check out the link that was posted, that guy is a genius!