PDA

View Full Version : My Incriminator Flatlyne SQ build.



AL210
09-02-2013, 08:54 PM
Incriminator Flatlyne 12" Subwoofer & AQ 1200D Amp - YouTube (http://youtu.be/tMw7LL7znEw)

ds0110
09-04-2013, 03:38 PM
The rms is 750...Youre giving it 1200 at 1 ohm?? or the 510 at 4ohms?

keep_hope_alive
09-04-2013, 05:04 PM
not a dig, but a box in a hatch isn't a "build". :)

you should route your RCA's a bit nicer, like you did with your power wire (even if the cheap RCA's are temporary).

the early tracks looked like there was some very low frequency noise in the system preventing the cone from returning quickly - is that in the recording, just a video artifact, or is there some low frequency noise in the amp output?

phemps
09-06-2013, 04:43 AM
I've always wanted to hear one of these. You in eastern PA? I've been seeing a lot of PA members lately and before i swear there were like none

AL210
09-07-2013, 10:39 PM
The rms is 750...Youre giving it 1200 at 1 ohm?? or the 510 at 4ohms?

1200 @ 1. Pushed it hard just a few times for demonstration. Normal listening levels are much less because my fronts can't keep up.:veryhapp:

AL210
09-07-2013, 10:44 PM
not a dig, but a box in a hatch isn't a "build". :)

you should route your RCA's a bit nicer, like you did with your power wire (even if the cheap RCA's are temporary).

the early tracks looked like there was some very low frequency noise in the system preventing the cone from returning quickly - is that in the recording, just a video artifact, or is there some low frequency noise in the amp output?

Yes, those RCAs were temporary for testing. I will be cleaning that up.

I don't know about the low freq noise. It maybe in the track? It was off a base king CD that came with the sub.

AL210
09-07-2013, 10:46 PM
I've always wanted to hear one of these. You in eastern PA? I've been seeing a lot of PA members lately and before i swear there were like none

Central close to Harrisburg.