PDA

View Full Version : help on amp rack design aq2200d



biglion
08-16-2013, 07:25 PM
trying to how to make my amp rack aq2200d with cooling fans any help and ideas would be thankful

05pontiac08
08-19-2013, 10:29 AM
26544440 a quick design without knowing the dimensions of the amp. but a general idea for you. set one side to pull the air in and the other side to push the air out, and mount it vertically.

05pontiac08
08-19-2013, 10:31 AM
trying to how to make my amp rack aq2200d with cooling fans any help and ideas would be thankful

dbl...

biglion
08-20-2013, 12:03 PM
26544440 a quick design without knowing the dimensions of the amp. but a general idea for you. set one side to pull the air in and the other side to push the air out, and mount it vertically.

hey thanks alot for idea
Dimensions 17.71"(L)x9.27"(W)x2.35"(H)

05pontiac08
08-20-2013, 02:44 PM
26544451 bored at work so here is a new and improved version with a mach up amp aswell as a cut sheet and dimensions.

http://orientalmotor.stage.thomasnet-navigator.com/item/cooling-fans-/mds-md-series-axial-flow-fans/md625b-12?&plpver=11&origin=advsrch&by=prod&filter=0&categid=1082&prodid=3001057

biglion
08-20-2013, 10:21 PM
man thanks alot its good their is some good fellow bassheads out their to help other bassheads out

biglion
08-20-2013, 10:23 PM
wow even hooked up the fans greatly appreciated

Buck
08-20-2013, 10:24 PM
What's up man?

ChaseinBass
08-20-2013, 10:37 PM
Wow That was cool - both the design and the fact you helped him out just like that! I dont have any measurement with me but i am wanting to do something like it to cover two amps on the back wall of my 96 gmc extra cab I guess it could make something like it but big enough for both amps?
Has anyone done one for there truck or is there anywhere i can look at pic online ?

biglion
08-20-2013, 10:41 PM
what up man tryin to get my system together

biglion
08-20-2013, 10:43 PM
What's up man?

man tryin to get my system togather whats good with you

05pontiac08
08-22-2013, 11:29 AM
wow even hooked up the fans greatly appreciated

thanks man
ha like i said i was bored at work and i have solidworks at my disposal gotta do something to make time go by.

biglion
08-22-2013, 12:14 PM
ok i was trying to see if could find similar fans to the ones u recommend and i couldn't find them

05pontiac08
08-22-2013, 01:54 PM
ok i was trying to see if could find similar fans to the ones u recommend and i couldn't find them

62mm X 62mm X 25.4mm is the size. but the Max. Air Flow on the ones i found are 17.7 CFM all the other ones i found are half that. these little guys are moving some serious air, make it cheaper and just use one on each end instead of 2.

biglion
08-22-2013, 09:02 PM
o oka i want 4 your recommended i was just curious to see if i could find on ebay