PDA

View Full Version : DC audio 2.0k



Bwap
08-12-2013, 01:55 AM
Item(s) for Sale:

DC audio 2.0k

Bass knob with clipping indicator

Item(s) Description/Condition:

DC audio 2.0k specifications:

Output Power (RMS) 4 ohm 14.4V 600W x 1
2 ohm 1,200W x 1
1 ohm 2,000W x 1
1 ohm@16v 2,500 x 1
Input Sensitivity 6V~0.2V
Low Pass Filter Switchable
( @ 24 dB Slope) Variable Hz 35~250
Subsonic Filter Switchable
( @ 24dB slope ) Variable Hz 10~50
Bass Boost Variable dB 0-9dB
Frequency Response Hz 15-270
Signal to Noise Ratio dB 100
Damping factor 150<
Efficiency @ 4ohm % Over 90%
THD @ 4ohms Less than 0.1%
Fuse Rating 200 Amps
Linked Fuse Rating 400 Amps
Indicator Power Yes
Protection Yes
Clip Yes
Speaker & Power terminal Mold type power
Power Gauge size 0Ga
Heatsink Length inch/mm 17.72" / 450mm
Heatsink Width inch/mm 9.38"/238mm
Heatsink Height inch/mm 2.35"/59.6mm



Price:

Taking offers, not set on a price.

Will add for an mmats 3000.1 or 3000.05
Also add for a DC XL 15" or any quality 15" sub(s) that handle around 2k


Shipping and Miscellaneous Item Information:

For an estimate my zip code is 12053

ExaltedAudio
08-12-2013, 08:20 AM
300?

shauncox26
08-12-2013, 09:10 AM
Pm'd good sir

SMS
08-12-2013, 09:13 AM
got a 15" death penalty D1? imo its a better sub than the xl

SMS
08-12-2013, 11:09 AM
are you near syracuse? are you familiar with TNESPL?

Bwap
08-12-2013, 11:29 AM
are you near syracuse? are you familiar with TNESPL?

Havent heard of them, I am a little west of Albany in duanesburg. About 2 hours from Syracuse. Right now I have two dc lvl 3 15s.. running off this 2k.

I don't know what will beat that(researching a bit more), but im basically looking for something with a powerful motor.. debating buying an mmats 3000.05 and an xl with level 5 solf parts or carbon fiber option.. or maybe an aq hdc4.0.. idk yet minds racing on the new setup, im sure you know what I mean.

SMS
08-12-2013, 12:20 PM
so im guessing your not interested in the DP. theres a guy near you that make custom subs- corey at spl audio- look him up in this forum and he can build you a custom driver that will destroy a xl for less money.
you looking for a spl sub or a daily or both?

Init 2 Winit
08-12-2013, 01:09 PM
How's the condition of the amp? I live in Rochester, NY.. heading out of town here shortly for work.. I'll check up on the thread when I get to my hotel room..

Bwap
08-12-2013, 02:07 PM
so im guessing your not interested in the DP. theres a guy near you that make custom subs- corey at spl audio- look him up in this forum and he can build you a custom driver that will destroy a xl for less money.
you looking for a spl sub or a daily or both?

I cant find any Thiele small parameters for the DP. Another thing is that with it being 1500 rms, I would need to get another to run off the mmats. Also if I were to run two, I would need them to be able to be wired to .5 ohms to power them. They really just don't fit my need, thanks tho. I saw SPL audio awhile back, and forgot about that option. I would be really interested in this, does he give the thiele small parameters of the subwoofers he makes?.. and how do I contact him?.. I thought he was pushed away from this board by vendors.


How's the condition of the amp? I live in Rochester, NY.. heading out of town here shortly for work.. I'll check up on the thread when I get to my hotel room..

Its in great condition, the only wear it has is a small part of where it says DC audio on the front is slightly worn in one spot. Besides that, the amp is mint. Purchased less than 6 months ago, work perfect. Never saw less than 1 ohm, never pushed or clipped. Sat in my room for half its life.

Kpswans
09-08-2013, 11:10 AM
Still for sale?

ExaltedAudio
09-09-2013, 11:02 AM
Interested in some sundown subs just reconed them 2 sa-8 v2 and 1 sd-2 12" also have 3 aq200.2 amps and a aq1200

Bwap
09-09-2013, 02:48 PM
Interested in some sundown subs just reconed them 2 sa-8 v2 and 1 sd-2 12" also have 3 aq200.2 amps and a aq1200

Sorry im looking for cash or to add cash for a larger amp.

Below20hzonly
09-11-2013, 10:54 AM
ygpm