PDA

View Full Version : what is my subs displacement



chefzane
08-11-2013, 09:40 PM
I have two kicker CVR 12's 2010 model, what is the cubic foot displacement of these, and my current box is a sealed 4.9 cube box so I'm guessing 4.6 after sub displacement and bracing, is this too big for two sub's in common airspace, basically 2.25+ each

bmk6795
08-11-2013, 09:58 PM
they are prolly .12 ISH per sub

chefzane
08-11-2013, 10:14 PM
So I'm about 4.5 cubes for two sub's same airspace, getting about 2.25 cubes a piece basically, is this too much and how can I calculate the freq of a sealed enclosure, I know its here somewhere just forgot

Slo_Ride
08-11-2013, 10:18 PM
per owners manual net displacement is 75.9 cubic inches, and max sealed box is 4.6 cubic feet per sub.


i'll do the math for you, 79.5 cuin equals 0.043924 cuft

http://www.kicker.com/sites/default/files/2010%20CompVR%20f01.pdf

chefzane
08-11-2013, 10:37 PM
Thanks bud was really just wanting the formula I have an owners manual just didn't think k it was in there, remember looking once but thought it wasn't there, that sounds really low to me thought it was bigger oh well thanks guys

chefzane
08-11-2013, 10:49 PM
And the freq it should be? How do I figure that

garychoffmann
08-11-2013, 10:57 PM
Sealed boxes don't have a tuning frequency..... Are you thinking f3?

chefzane
08-11-2013, 11:45 PM
They don't have a tuning freq ur right but they do have a freq at which they have the best output, is this just the resonant freq of the driver, that doesn't make sense to me