PDA

View Full Version : 6.5 Component Suggestions for 200w rms +



adio25
08-02-2013, 05:27 PM
Looking for some 6.5" comps that can handle around 200w-300w rms each side. Throw me your suggestions

mylows10
08-02-2013, 05:59 PM
I have the set for you. Need a budget

trumpet
08-02-2013, 06:00 PM
A 3-way will handle 200W per side, and I have a way to do this without fabricating mounts or cutting big holes. It will sound a lot better than a 2-way that will be getting into power compression with that much power.

adio25
08-02-2013, 06:45 PM
Trying to stay around 200-300. What 3 way system is it?

trumpet
08-02-2013, 09:43 PM
I don't have a 3-way that I can comfortably recommend to take 200-300W for $200-300. CDT MX-3HD-Pod (http://cdtdealer.com/easy-way-electronics/mxdesigns/mx3hdpod.htm) with the HD-M6 upgrade could take 200. It would work with 300W if you're going to listen to music with a wide dynamic range(high crest factor aka "SQ" music). If they blow I can't warranty them since they're rated for ~200W RMS per side.