PDA

View Full Version : Threatcon 4 12" Pre-sale!!



C2 Audio
07-26-2013, 09:08 PM
C2 Audio 12" Threatcon-4 (http://www.carstereogiant.com/ProductDetails.asp?ProductCode=Threatcon%2D4%2D12&CartID=3)

Here it is. Threatcon 4 Pre-sale for $199.99 Shipped!!!. Multiple requests for the Threatcon 4 12" woofer and after months of testing I've chosen to run with the 4" coil version.

This run of Threatcon 4 12"s is small. I've ordered the parts for 100 woofers and once they arrive I will assemble them in house. This is a pre-sale and expect the woofers to arrive within 8-10 weeks to allow for parts arrival, building and testing, and then shipping to customers.

Here are the Specifications!

12" Threatcon-4 Subwoofer
Available in Dual 4 Ohm and Dual 2 Ohm

1500 Watts RMS
4" High Temp Coil on Black Aluminum Former
Dual Black Nomex Spiders with Bolt Down Mounting
High Current Flat Tinsel Leads
Dual Stitched High Rise Rubber Surround

Enclosure Recommendations:
Sealed: 1.0 - 1.25 ft^3
Ported: 1.5 - 2.0 ft^3 @ 35hz




12" Threatcon-4

FS: 35.4 Hz
VAS: 31.8 L
QES: .37
QMS: 5.09
QTS: .34
BL: 19.7
MMS: 219.8
SENS: 91 DB
XMAX: 32 MM


EXT DIA: 12.83"
CUT OUT DIA: 11.063"
MOUNT DEPTH: 7.8"

C2 Audio
07-26-2013, 09:18 PM
So presale was started about 45 minutes ago. I just finished posting everything and looked at recent emails. 12 woofers have already been sold...I believe these will be going fast people!

--Chris

NASTY08IMPALA
07-26-2013, 09:25 PM
really 1200rms ??? what a waste of a 4" coil

jasonbillnelson
07-26-2013, 09:30 PM
Chris rates his woofers very conservatively. I'd say the woofer laughs at 1200 RMS.

NASTY08IMPALA
07-26-2013, 09:42 PM
Chris rates his woofers very conservatively. I'd say the woofer laughs at 1200 RMS.

Conservative.and scaring ppl off with a 4" coil of 1200rms are a very thin line .....if.a 4" coil cant take 4k+all day every day dont.waste ur time

NASTY08IMPALA
07-26-2013, 09:48 PM
Dont get me wrong.the price is.nice. and the sub looks decent ...

jasonbillnelson
07-26-2013, 10:12 PM
I'll be picking one up. Can't wait to see what people do with it.

The Audio Guy
07-26-2013, 11:34 PM
Chris is a great guy guys ! Best woofers for the price

ChaseinBass
07-27-2013, 12:00 AM
Hello,I am new to this so go easy on me lol But I see these need to be in a sealed box with 1 cf of air space , What would happen if i put them in a box with only .95 of air space ? Or should I be looking for smaller subs ? Thanks

Jimmy Rustler
07-27-2013, 05:18 AM
How do we note which voice coil configuration we would like if pre-ordering?

jasonbillnelson
07-27-2013, 09:55 AM
How do we note which voice coil configuration we would like if pre-ordering?

I will alert Chris of this. But if you are ready to order now you can put which coil configuration you would like in the order comments section. They will be either Dual 2 or Dual 4.

jasonbillnelson
07-27-2013, 10:01 AM
Chris just had it fixed. And I checked. It's good to go.

DRS0105
07-27-2013, 11:08 AM
Just wondering what the advantages were to using a 4" coil in this specific application. Wouldn't a 3" coil been more efficient, unless these are under rated by a good 1500 watts.

C2 Audio
07-27-2013, 12:55 PM
My Reason for the 4" coil on this sub is because it works.... :-) When I say it works, I mean that it is going to take lots of power and be reliable for a long period of time. From my 18 years experience selling car audio I have found that now more than ever if a woofer states 500 RMS, people will run 1000+ watts Daily to it. Also in many cases that 1000 watts will be dirty clipped and distorted... All while having the woofer in the wrong box. So my reason behind the oversized coils (Like the 300+ Degree 3" coil on our Threatcon-2 woofer) is that they will take power and hold up to wicked amounts of abuse. On the first production run of the Threatcon-2 12" woofers we had 2 woofers reported with issues. Only 2! One of the woofers failed after 30 minutes of torture. It was used in two bass races and than immediately into a DB drag lane all within minutes of each other. The customer was using 4 woofers running over 5K watts. So over 1250 watts to our 600 watt RMS woofer and only 1 failed due to the Former splitting.... The second woofer was sold used by another member on this forum and FedEx must have tossed it Hard, as the motor was shifted upon re-delivery to the new owner. I say that is a total Success for any woofer line. Talk to anyone that owns a C2 woofer and I am sure they will back up that our woofers will take way more abuse than any other woofer in our price range.
Now back onto the Threatcon-4 4" Coil. We are offering 100 woofers on Pre-Sale for $199 Delivered. To offer this kind of price on this Caliber of a woofer I had to use existing components and limit tooling costs. the 4" coil we are using already exists. Sure it cost me a few dollars more than the 3" but only by a few dollars. I honestly would rather spend a few more dollars now than have to get an email from someone stating their woofer failed. anyone reading this Post knows by the Parameters posted that she will take 1200 with ease in the correct box.
As I have stated before "We Use Better Components, to Offer You Better Products" I am sure we will catch a little bit of heat from other manufacturers but I would like to see some of our Higher Power Handling woofers on the streets beating cars apart, so we can move forward on other projects and continue building the C2 Audio Family. --Chris

DRS0105
07-27-2013, 01:26 PM
Thanks for the reply. I wasn't trying to crap on your product or anything like that. I was truly curious. Regardless of the coil, $200 for a 12 rated at 1200 is a hard deal to pass up on.

C2 Audio
07-27-2013, 01:32 PM
No worries, I Honestly don't Mind answering any questions that you may have. We take pride in our product and I feel that it shows in the overall finished products.

SounDrive
07-27-2013, 01:47 PM
I'm just curious why you went with a less efficient 4" coil rather than a 3" coil for this particular sub. I've seen 3" coil subs with a 2500+ RMS rating and they can take much more power than they're rated for. And is this more of a SPL or daily sub?

C2 Audio
07-27-2013, 02:02 PM
I tried a 3" coil and this 4" coil in prototypes. You are correct it was not as efficient in a few ways But after comparison testing the 4" coil works extremely well in this woofer and proved to be the Most reliable under extreme loads. This finished prototype was chosen unanimously as the design of choice. With that being said the TS parameters back everything else up and it Is the right choice for this woofer.

dbjunior
07-27-2013, 04:04 PM
Id love to see some of these 2500+ watt 3in coil subs truly run on 2500 watts for long time and see how many last. I'm not talking 2500watt amp wired to 1ohm rising to 3ohm only putting out 800 watts for 30 seconds. A 4 in coil should handle 1600watts true clamped power for a straight 30+ mins 3in 1200watts. Cooling can increase this a couple hundred watts tops.

Silverado SS
07-27-2013, 05:17 PM
Id love to see some of these 2500+ watt 3in coil subs truly run on 2500 watts for long time and see how many last. I'm not talking 2500watt amp wired to 1ohm rising to 3ohm only putting out 800 watts for 30 seconds. A 4 in coil should handle 1600watts true clamped power for a straight 30+ mins 3in 1200watts. Cooling can increase this a couple hundred watts tops.

I think any 4" coil should be able to take 1600 watts but completely agree with your imp. Rise statement

jasonbillnelson
07-27-2013, 09:46 PM
Chris is a great guy guys ! Best woofers for the price

Great woofers regardless!

C2 Audio
07-27-2013, 11:05 PM
This post is for our new Threatcon-4 12" which we state is 1200 watts RMS. This woofer will take the RMS all day and at $200 delivered pre sale price is by far a Great buy. Look at the components being used and read the ts specs. You can see it is the real deal and will be a leader in The 1200 watt category. If you want to discuss a 2000+ watt sub look for details on our Threatcon-6 subs that will be released around December. This woofer will be also have a 4" coil (But different Coil than the threatcon-4 of Course) and this one will be designed to handle extreme heat. We are designing the Threatcon-6 sub to have a 2000 watt RMS rating and should retail in mid $350 range.

jasonbillnelson
07-28-2013, 10:29 AM
This post is for our new Threatcon-4 12" which we state is 1200 watts RMS. This woofer will take the RMS all day and at $200 delivered pre sale price is by far a Great buy. Look at the components being used and read the ts specs. You can see it is the real deal and will be a leader in The 1200 watt category. If you want to discuss a 2000+ watt sub look for details on our Threatcon-6 subs that will be released around December. This woofer will be also have a 4" coil (But different Coil than the threatcon-4 of Course) and this one will be designed to handle extreme heat. We are designing the Threatcon-6 sub to have a 2000 watt RMS rating and should retail in mid $350 range.

Sounds like a winner! Threatcon 4 for me for now!!!

05fronty
07-28-2013, 11:18 AM
I might have to wait for the big boy now

jasonbillnelson
07-28-2013, 01:29 PM
I might have to wait for the big boy now

You know you want a Threatcon 4!

ChaseinBass
07-28-2013, 03:54 PM
Hello,I am new to this so go easy on me lol But I see these need to be in a sealed box with 1 cf of air space , What would happen if i put them in a box with only .95 of air space ? Or should I be looking for smaller subs ? I poster this already one and nobody answered ? is that because its a dumb question ? sorry but I dont know much about this stuff yet. And a sufficant amp size suggestion would be a great help also
Thanks

05fronty
07-28-2013, 04:12 PM
Hello,I am new to this so go easy on me lol But I see these need to be in a sealed box with 1 cf of air space , What would happen if i put them in a box with only .95 of air space ? Or should I be looking for smaller subs ? I poster this already one and nobody answered ? is that because its a dumb question ? sorry but I dont know much about this stuff yet. And a sufficant amp size suggestion would be a great help also
Thanks
Polyfill and it will be fine

ChaseinBass
07-28-2013, 04:22 PM
not even going to play like i know what you mean lol Polyfill ? also i got a chance to buy Kicker zx 1500.1 or zx 2500.1 amps are these amps any good and would either be good to use with these subs ?

nate1017
07-28-2013, 04:35 PM
not even going to play like i know what you mean lol Polyfill ? also i got a chance to buy Kicker zx 1500.1 or zx 2500.1 amps are these amps any good and would either be good to use with these subs ?

Yea these are good amps man, kicker is mostly frowned upon on this site but as far as their amps go they aren't that bad at all.

bmk6795
07-28-2013, 04:37 PM
not even going to play like i know what you mean lol Polyfill ? also i got a chance to buy Kicker zx 1500.1 or zx 2500.1 amps are these amps any good and would either be good to use with these subs ?

polyfill is used in sealed sub boxes to make the sub "think" it's in a larger enclosure, as far as the amps, if you plan to run one of these get the 1500 and a dual 4 ohm sub, if you plan to run 2 get 2 dual 2 ohm subs. from what I've heard (no personal experience) they are decent amps, if you get them at a decent price. if you are paying retail for them better can be had for the price.

ChaseinBass
07-28-2013, 04:48 PM
Ya i am gettin a good price. Should i just get the 2500.1 and be done or too over kill ? I want to run two of these subs ,will the 1500.1 do it?
For that matter i have a Kicker zx 1000.1 will it do it ? i had it wired to one kicker cvr dual voice coil and it did pretty good but i didnt think it would be enough to run two 12s

bmk6795
07-28-2013, 05:14 PM
Ya i am gettin a good price. Should i just get the 2500.1 and be done or too over kill ? I want to run two of these subs ,will the 1500.1 do it?
For that matter i have a Kicker zx 1000.1 will it do it ? i had it wired to one kicker cvr dual voice coil and it did pretty good but i didnt think it would be enough to run two 12s

for 2 of these get te 2500

ChaseinBass
07-28-2013, 05:21 PM
ok thanks< oh ya on the poly fill is it like the stuffing in pillows ? if so how much do you put in each side ?

jasonbillnelson
07-30-2013, 10:02 AM
Never used polyfill but from what I've seen, you can just line the sides and back of the box to "trick" the woofer. And get the 2500.1 man. You can always wire to 1 ohm and tune so you're only sending 1k or 1.5k watts wise to a woofer. I've got a 2200 @ 1 ohm American Bass VFL-Hybrid 4480.1 amp right now that I'm only running 1 k with. Nothing wrong at all with some overhead wattage. I can't wait to pick up one of the Threatcon 4's and am glad that I got an amp with plenty of overhead for an upgrade like this.

Reinhardt
07-31-2013, 03:58 PM
Id love to see some of these 2500+ watt 3in coil subs truly run on 2500 watts for long time and see how many last. I'm not talking 2500watt amp wired to 1ohm rising to 3ohm only putting out 800 watts for 30 seconds. A 4 in coil should handle 1600watts true clamped power for a straight 30+ mins 3in 1200watts. Cooling can increase this a couple hundred watts tops.

I have a IA DP that I run over 1700 watts to daily for long periods of time with no problems and it has a 3" VC. I have never felt the dust cap get more then slightly warm.

jasonbillnelson
08-01-2013, 08:12 AM
Anyone got a sweet build planned for these?

C2 Audio
08-01-2013, 09:11 AM
Keep the Orders coming!!

C2 Audio
08-01-2013, 09:11 AM
Keep the Orders coming!!

C2 Audio
08-01-2013, 09:14 AM
Keep the orders coming!!

-Chris

rebelfromva
08-01-2013, 09:34 AM
No pics?

C2 Audio
08-01-2013, 09:38 AM
C2 Audio 12" Threatcon-4 (http://www.carstereogiant.com/ProductDetails.asp?ProductCode=Threatcon%2D4%2D12&CartID=3)

pictures are there

dookie-face
08-01-2013, 09:58 AM
Is the 32mm Xmax each way?

dbjunior
08-03-2013, 10:58 AM
I have a IA DP that I run over 1700 watts to daily for long periods of time with no problems and it has a 3" VC. I have never felt the dust cap get more then slightly warm.

So that's my point your sub is not getting 1700w, unless your using a 5k and driving around playing tones. If your using a 1700w amp and playing music your sub is getting nowhere near 1700w and its not constant

jasonbillnelson
08-03-2013, 11:02 AM
Is the 32mm Xmax each way?

Just asked and Chris said it's 32mm XMAX total

C2 Audio
08-03-2013, 12:41 PM
Pre-sale is going strong!

--Chris

jeffdachef
08-03-2013, 08:34 PM
these look nice but when you guys make a 15" Threatcon 4, I'll hit you up.

C2 Audio
08-04-2013, 05:03 PM
these look nice but when you guys make a 15" Threatcon 4, I'll hit you up.

Sounds good! Thanks!

--Chris

C2 Audio
08-08-2013, 11:28 AM
Pre-sale is still kickin!

--Chris

C2 Audio
08-15-2013, 08:12 PM
Anyone have a build planned for these yet?

--Chris

dbeez
08-15-2013, 08:33 PM
Not til 15's hit or you want to sell me 4 motors and I will do my own thing on baskets and softparts.

jasonbillnelson
08-16-2013, 07:41 AM
might have to snag a second one.....

jeffdachef
08-22-2013, 04:03 AM
hmm, instead of waiting for a single threatcon 4 15" ported, i might just spluge and get two of these in a 4th order box. It'll be ran on a hifonics brx 2400.1D the amps a bit overrated and there might be some box rise, would these subs be okay if they are a couple rms away from being fully powered? Would they do well in a 4th order also?

jasonbillnelson
08-22-2013, 11:23 AM
hmm, instead of waiting for a single threatcon 4 15" ported, i might just spluge and get two of these in a 4th order box. It'll be ran on a hifonics brx 2400.1D the amps a bit overrated and there might be some box rise, would these subs be okay if they are a couple rms away from being fully powered? Would they do well in a 4th order also?

I asked chris about this while on lunch what we concluded was this:

If you want to run these in a 4th (which would be fine...and loud!) you would want to run at RMS if not a little over. He's rated these woofers very conservatively. If I were to run 2 Threatcon 4's I would at a minimum be running a quality 3k if not a 3.5k amp. If you don't want to swap out your amp but want to do a 2 12" 4th you could pick up 2 of the Threatcon 2 12's and run 800-1k to them. I've ran a clean 1k to my threatcon 2 12" and the threatcon 2 15" prototype daily and they take it no problem.

basswiigee
08-22-2013, 11:36 AM
you got any videos of the threatcon 4 in action?

and how do you think these would compare to a HDC3 12

jasonbillnelson
08-22-2013, 11:52 AM
you got any videos of the threatcon 4 in action?

and how do you think these would compare to a HDC3 12

Chris hasn't taken any videos (if he has I haven't seen them) of this final Threatcon 4 prototype. And I have no hands on experience with an HDC3 12 so that may have to be left up to Chris to answer.

basswiigee
08-22-2013, 11:54 AM
Chris hasn't taken any videos (if he has I haven't seen them) of this final Threatcon 4 prototype. And I have no hands on experience with an HDC3 12 so that may have to be left up to Chris to answer.

ya hear that chris come talk to me!!!! lol

Popwarhomie
08-22-2013, 12:22 PM
Im in for two threatcon 6 18"s :D

jasonbillnelson
08-22-2013, 12:29 PM
Im in for two threatcon 6 18"s :D

Holy crap I could only imagine! I've talked to chris a little about the Threatcon 6. I'm still waiting to see a prototype....let alone an 18" prototype for the 2, 4 or 6!

Popwarhomie
08-22-2013, 12:44 PM
Holy crap I could only imagine! I've talked to chris a little about the Threatcon 6. I'm still waiting to see a prototype....let alone an 18" prototype for the 2, 4 or 6!

I would probably be interested in threatcon 4 18s seeing as they have 4" coils I would guess they can handle 1500+.

jasonbillnelson
08-22-2013, 12:50 PM
I would probably be interested in threatcon 4 18s seeing as they have 4" coils I would guess they can handle 1500+.

Chris has put well over rated power to the prototypes. His ratings are, as he says, "bulletproof." At 1200 RMS you could play it all day long and never have an issue but still get a d@mn good amount of output. Plus he says when people rate their woofers at 1k or 500rms or 2k rms the customer ends up throwing nearly double at it anyway. So he took that into account as well. Not to mention newbies who may buy them and do that inadvertantly.

pro-rabbit
08-22-2013, 12:55 PM
Since it was brought up a bit in here...I want to touch on something that was mentioned.

A driver will never need XXXX power (rms) to work properly or to generate good output. The amount of power the driver will require is based on the application, setup, desired response, and the enclosure it self.

This does not just apply to C2 obviously, but seen it was brought up..so thought I would chime in.

jasonbillnelson
08-22-2013, 01:00 PM
i've been powned....

pro-rabbit
08-22-2013, 01:02 PM
i've been powned....

lol, naw just seen it was being discussed and thought I would toss that out there. It said on this forum all the time... "You need 2k rms to run sub.. blah blah.." Maybe a simple post to help a few now will help many later?....who knows.. lmao

jasonbillnelson
08-22-2013, 01:05 PM
lol, naw just seen it was being discussed and thought I would toss that out there. It said on this forum all the time... "You need 2k rms to run sub.. blah blah.." Maybe a simple post to help a few now will help many later?....who knows.. lmao

cool cool....now toss us a review video! Can't wait for you to review the Threatcon 4 as well when it arrives!

pro-rabbit
08-22-2013, 01:12 PM
cool cool....now toss us a review video! Can't wait for you to review the Threatcon 4 as well when it arrives!

With the show season in full swing we have been swamped so editing progress is slow. However, after the 8th of next month we should have a little something to post up for C2. Chris and I have been talking recently about several things.... just have to wait and see what all pans out like we would like it to.

jasonbillnelson
08-22-2013, 01:12 PM
With the show season in full swing we have be swamped so editing progress is slow. However, after the 8th of next month we should have a little something to post up for C2. Chris and I have been talking recently about several things.... just have to wait and see what all pans out like we would like it to.

Sweet!

jeffdachef
08-22-2013, 04:44 PM
I asked chris about this while on lunch what we concluded was this:

If you want to run these in a 4th (which would be fine...and loud!) you would want to run at RMS if not a little over. He's rated these woofers very conservatively. If I were to run 2 Threatcon 4's I would at a minimum be running a quality 3k if not a 3.5k amp. If you don't want to swap out your amp but want to do a 2 12" 4th you could pick up 2 of the Threatcon 2 12's and run 800-1k to them. I've ran a clean 1k to my threatcon 2 12" and the threatcon 2 15" prototype daily and they take it no problem.

Thats what i thought, My amp would barely tickle a pair of these, maybe if i had two of these amps then it would work lol. Now here comes the tricky part, my trunk can fit 2 15s in an aeroported box or 2 12s in a 4th order, which would sound louder hmmm..

jasonbillnelson
08-22-2013, 06:12 PM
Thats what i thought, My amp would barely tickle a pair of these, maybe if i had two of these amps then it would work lol. Now here comes the tricky part, my trunk can fit 2 15s in an aeroported box or 2 12s in a 4th order, which would sound louder hmmm..

well 2 15's have the extra cone area and will get loud....although 4th orders are righteously loud as well.....thats a tricky one jeff---- maybe pro-rabbit ; has a definitive answer.

C2 Audio
08-25-2013, 12:16 PM
up

dirt101
08-25-2013, 05:08 PM
cant wait for info on the threatcon 6s!

armykyle1
08-25-2013, 05:29 PM
I wish I could sample the compliance of the surround and spiders on these. I'm considering a 8 12 wall. This seems like an amazing deal nonetheless.

I'm curious though, are these "bottomless?"

C2 Audio
08-26-2013, 01:51 PM
I wish I could sample the compliance of the surround and spiders on these. I'm considering a 8 12 wall. This seems like an amazing deal nonetheless.

I'm curious though, are these "bottomless?"

A wall consisting of 8 Threatcon 4 12"s would be a sight to see, hear, and feel!

Could you elaborate on "bottomless?"

--Chris

armykyle1
08-26-2013, 10:46 PM
A wall consisting of 8 Threatcon 4 12"s would be a sight to see, hear, and feel!

Could you elaborate on "bottomless?"

--Chris

Are they mechanically limited? Essentially, will the coil smack the bottom plate if you go too retarded?

The 8 12s is coming into light. I just can afford new subs, so I'm building some. I'm definitely curious about these and will be staying tuned in.

C2 Audio
08-27-2013, 04:47 PM
At Mechanical Limits they are designed to come out of the gap (Causing Popping Sound) before bottoming out or hitting the Backplate as this impact can cause Damage to the Former. --Chris

jasonbillnelson
08-27-2013, 04:50 PM
Are they mechanically limited? Essentially, will the coil smack the bottom plate if you go too retarded?

The 8 12s is coming into light. I just can afford new subs, so I'm building some. I'm definitely curious about these and will be staying tuned in.


At Mechanical Limits they are designed to come out of the gap (Causing Popping Sound) before bottoming out or hitting the Backplate as this impact can cause Damage to the Former. --Chris

Looks like C2's got you covered!

C2 Audio
08-30-2013, 08:07 PM
Still going!

Trigg
09-21-2013, 02:43 PM
Any word on shipping date on these?

babsuhl81
10-22-2013, 07:34 PM
Is the pre sale still going on?

C2 Audio
10-27-2013, 01:35 PM
Pre-sale is still going on. There are only a few Threatcon 4's remaining so if anyone else wants them they need to snag them quickly!

I have all of the parts in hand EXCEPT the coils. I'm expecting those to be in hand around Friday. I'm on the phone with the guys I'm getting the coils from daily to get everything worked out. Parts for this woofer were ordered from seperate locations due to what I wanted for the woofer and it's caused some delays. However, it will all be worth it when you have them in your rides and hitting the lows!

So, as long as the coils are in hand by Friday, I plan to build and test each woofer and have them shipping to you guys by mid-november.

Sorry for these delays, but the woofer is worth it!

--Chris

C2 Audio
11-16-2013, 08:29 AM
Update:

The coils that arrived last Friday weren't wound to our specifications (too short). I've contacted the build house in Japan and they've gotten the correct coils made and these are being Air Mailed to us. The baskets and motors are mounted. Just need to get coils to press on. As soon as they arrive i will update you guys again.

-Chris

pickup1
11-16-2013, 09:01 AM
That's the only thing about getting parts from overseas..
Hey,your in Youngstown.... ever hear of a place called Carson's autobody or Carson's automotive?

C2 Audio
11-16-2013, 02:59 PM
Doesn't ring a bell. Sorry.

-Chris

C2 Audio
11-17-2013, 01:26 PM
http://i39.tinypic.com/2urs39i.jpg
http://i43.tinypic.com/2qn8vsw.jpg
http://i44.tinypic.com/2cpwzrp.jpg

So the finalized TS Parameter Threatcon 4 12" that was assembled arrived today. The correct coils are on a plane to us so they should arrive shortly. We will be building and testing soon guys!!! This woofers a monster!!!

C2 Audio
11-26-2013, 03:01 PM
Coils are in and production is happening! We will be building and testing this week and shipping out shortly after!!!

--Chris

Trigg
12-08-2013, 03:56 PM
Can't wait to get it in!

babsuhl81
12-17-2013, 09:17 PM
Anyone got theirs yet?

Trigg
12-20-2013, 07:50 PM
Not me :(

jasonbillnelson
12-20-2013, 10:19 PM
Just talked to Chris about this and he said a bunch went out each day this week and the remaining woofers (about 16) are going out the door monday. They are prepped ready for pick up by UPS on Monday.

centergod79
01-17-2014, 12:09 PM
Conservative.and scaring ppl off with a 4" coil of 1200rms are a very thin line .....if.a 4" coil cant take 4k+all day every day dont.waste ur time

There's a lot of 4" coils that aren't rated for 4K all day, in fact I can't think of one that's rated for 4k all day. !500 watts is an extremely high rating, you have to have a lot of faith in your woofer to say 1500 watts, knowing that 90% of the people who would even consider buying this woofer will definitly give the woofer it's own rating once they have it in there hands. 2 examples- an AB HD rated for 1500 watts 3" coil, but I know for a fact the woofer will take 3K+ from personal experience. The AB VFL 2Krms 4" coil, bottoms out on 3K+. Let's go back in time a little, Rockford HX Power 12" 4" Coil 1000Watts rms, and the HX2 Power was one of Car Audios favorites by a lot of people. I'm not saying anything about this C2, because I haven't dealt with it, and probably won't because one of my Distributors just called me about these new woofers, and guess what, the Dealer Cost is exactly what this thread want's for the woofer. I was actually thinking of bringing this woofer in until I seen this thread. But that doesn't mean that it isn't a good woofer, it's just obvious the owner of the company isn't too interested in making it a successful line. I'm in the mix of developing a line, and I promise that any dealer will have the chance to make money off of my line, when ever I get it going.

redrider
01-17-2014, 12:47 PM
I'm not saying anything about this C2, because I haven't dealt with it, and probably won't because one of my Distributors just called me about these new woofers, and guess what, the Dealer Cost is exactly what this thread want's for the woofer. I was actually thinking of bringing this woofer in until I seen this thread..

are you talking about the presale price that was 199 or the reg price of 299?

centergod79
01-21-2014, 01:02 PM
are you talking about the presale price that was 199 or the reg price of 299?

You can call it what you want, they'll always be some sort of sale. These woofers will never hold a $300 value, If you don't believe me, put some on here for sale.

a1mcalister1
04-04-2014, 11:31 AM
WHEN, When, when will they be ready? Lol I can't wait for a pair!

jasonbillnelson
04-04-2014, 08:21 PM
WHEN, When, when will they be ready? Lol I can't wait for a pair!

They've come and gone man. C2 Audio has been sold out on these woofers for a few weeks. You may want to look into the Team 1k 12". Go look around ::. C2Audio .:: (http://www.c2audio.com) and see what's up.