PDA

View Full Version : 4 DC Lv4-12's, Interchangeable octogon port, birch build



Canaan
07-20-2013, 08:53 PM
Build I'm working on for a Team South teammate w/ for DC Level 4 12's.
Got some of the box done today, going to try and finish up tomorrow.

http://i303.photobucket.com/albums/nn154/audible_insanity/photo-1.jpg (http://s303.photobucket.com/user/audible_insanity/media/photo-1.jpg.html)
Shot of the port

http://i303.photobucket.com/albums/nn154/audible_insanity/photo2-1.jpg (http://s303.photobucket.com/user/audible_insanity/media/photo2-1.jpg.html)
Should be plenty of port area.

http://i303.photobucket.com/albums/nn154/audible_insanity/photo3-1.jpg (http://s303.photobucket.com/user/audible_insanity/media/photo3-1.jpg.html)

http://i303.photobucket.com/albums/nn154/audible_insanity/photo4-1.jpg (http://s303.photobucket.com/user/audible_insanity/media/photo4-1.jpg.html)
Just dropped the port in the box to see how it looks.

http://i303.photobucket.com/albums/nn154/audible_insanity/photo5.jpg (http://s303.photobucket.com/user/audible_insanity/media/photo5.jpg.html)
Built a simple jig for the port wall and tacked it in place w/ brads.

http://i303.photobucket.com/albums/nn154/audible_insanity/photo7.jpg (http://s303.photobucket.com/user/audible_insanity/media/photo7.jpg.html)
Flush trimmed it out....yea...I know...my bit is getting dull. I need a new one ASAP.

http://i303.photobucket.com/albums/nn154/audible_insanity/photo9.jpg (http://s303.photobucket.com/user/audible_insanity/media/photo9.jpg.html)
Snug fit around the port, about 1/8" clearance all the way around to allow for a little wiggle room.

http://i303.photobucket.com/albums/nn154/audible_insanity/photo10.jpg (http://s303.photobucket.com/user/audible_insanity/media/photo10.jpg.html)

http://i303.photobucket.com/albums/nn154/audible_insanity/photo11.jpg (http://s303.photobucket.com/user/audible_insanity/media/photo11.jpg.html)

http://i303.photobucket.com/albums/nn154/audible_insanity/photo12.jpg (http://s303.photobucket.com/user/audible_insanity/media/photo12.jpg.html)

Just how the port will mount in the enclosure. Its a tight squeeze.
Have to build the baffles tomorrow, subs will be flush mounted. Adding more bracing and using T-nuts to secure the port.

More to come.

vetkilr
07-20-2013, 09:07 PM
Good start man...