View Full Version : advise needed for sand in paint
05-06-2004, 01:56 PM
i just finished up my fiberglass box and rite in front of the box there are big sands pebble that is really annoying because it rite there...what should i do to get rid of it...i dont want to paint the box over..i was thiking of sanding that part down to get the sand out and spray that part again and then clear it...help me guys
05-06-2004, 02:06 PM
Yep sand that area down , and some of the area around so you can feather the paint in after you sand out the bumps. Then just prime and paint . :)
05-06-2004, 02:11 PM
so i should sand the area all the way down? the box is aready paint and cleared..
05-06-2004, 07:10 PM
Sand far enough to remove the pebble and make it all smooth. Feather out a ways so you don't leave a noticeable low spot. I would use 600 grit or finer. If you go through the clear, you'll hafta paint and clear over that spot. If it's only on the surface, you might get away with just buffing out the sanded area.