PDA

View Full Version : Custom 15" Av.2 Subwoofer



*Ace*
07-14-2013, 07:18 PM
Item(s) for Sale:
Custom 15" Av.2 Subwoofer



Item(s) Description/Condition:
Cosmetically = 8/10
Mechanically = 10/10

Visually the motor has some small scratches from previous owner and the glue job could have been a bit prettier (this was my first custom build and first time using CA glue lol). Just a few areas received a little too much activator and caused the surface of the CA glue to bubble and whiten a bit. But all the joints are strong and I tested this guy for probably an hour in my car. It was free air and was hooked up to my Audioque 1200 at 1 ohm with no issues at all.

It uses an Elemental Designs AV.2 motor with a 3" 4 layer copper D2 voice coil, TC Sounds 15" Ti Basket, stacked 10" TC spiders with dual sewn on leads, Sundown ZV.3 15" Cone/Surround, and a 5.9" CF dustcap.


Price:
$425 shipped




Shipping and Miscellaneous Item Information:
Shipped through Fedex and insured for $500. I only ship to your paypal address.



Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).


http://i816.photobucket.com/albums/zz87/jc_smith/IMG_1121_zps21463554.jpg

http://i816.photobucket.com/albums/zz87/jc_smith/IMG_1103_zpsffe96426.jpg

http://i816.photobucket.com/albums/zz87/jc_smith/IMG_1111_zpsd72a8784.jpg

http://i816.photobucket.com/albums/zz87/jc_smith/IMG_1110_zpsb186f987.jpg

http://i816.photobucket.com/albums/zz87/jc_smith/IMG_1117_zps499d2eb8.jpg

http://i816.photobucket.com/albums/zz87/jc_smith/IMG_1118_zpsc57f83dd.jpg

http://i816.photobucket.com/albums/zz87/jc_smith/IMG_1073_zps6accb430.jpg

http://i816.photobucket.com/albums/zz87/jc_smith/IMG_1113_zps5647c146.jpg

http://i816.photobucket.com/albums/zz87/jc_smith/IMG_1130_zpsab2d60d0.jpg

http://i816.photobucket.com/albums/zz87/jc_smith/IMG_1134_zps79347657.jpg

Dirtrider4eva
07-15-2013, 01:06 AM
and if anyone needs a motor i know someone with a 2nd to match his.

*Ace*
07-16-2013, 09:12 PM
Bump. I also have a matching motor for those that are interested.

Robertvon
07-16-2013, 10:40 PM
Will you sell the extra motor separately ?

*Ace*
07-17-2013, 12:46 AM
Will you sell the extra motor separately ?

Sorry but no thanks

*Ace*
07-19-2013, 12:30 AM
Price dropped to $425 shipped

*Ace*
07-21-2013, 07:57 PM
Bump. Forgot to put in original post, but I would give this guy around 1200 watts rms

*Ace*
07-23-2013, 11:07 PM
bump

111brandon
07-26-2013, 04:41 AM
Nice sub wish I had the money is this also on car audio classifields?

*Ace*
07-27-2013, 12:50 AM
Nice sub wish I had the money is this also on car audio classifields?

Yes sir :) My username is jc_smith over there

*Ace*
07-28-2013, 07:45 PM
Price drop $375 shipped

*Ace*
07-31-2013, 08:33 PM
bump

supereikenator
07-31-2013, 08:59 PM
Very nice sub! I don't have that kind of cash, but seriously, great work man.

*Ace*
08-02-2013, 08:59 PM
Very nice sub! I don't have that kind of cash, but seriously, great work man.

Thanks!

Bump

gckless
08-02-2013, 09:18 PM
and if anyone needs a motor i know someone with a 2nd to match his.

Price?

This sub is beautiful! OP, is the coil underhung? Looks like a good motor for it.

*Ace*
08-02-2013, 10:40 PM
Price?

This sub is beautiful! OP, is the coil underhung? Looks like a good motor for it.

The coil is slightly overhung. I had a bunch of coils already on hand and didn't want to buy more for the build, but none of the coils I owned had a winding width smaller than 2.3".

gckless
08-03-2013, 11:34 AM
The coil is slightly overhung. I had a bunch of coils already on hand and didn't want to buy more for the build, but none of the coils I owned had a winding width smaller than 2.3".

Do you know the size of the gap? Still, I'm seriously in love with this sub. Wish I had the cash. GLWS!

*Ace*
08-03-2013, 02:16 PM
Do you know the size of the gap? Still, I'm seriously in love with this sub. Wish I had the cash. GLWS!

Coil specs are:
ID = 3.0140"
OD = 3.2790"
W. Width = 2.2905"
F. Height = 5.5"

Motor Specs are:
Pole OD = 2.9570"
Top Plate ID = 3.3500"
Top Plate Thickness = 2"

So 1.45mm between coil and pole piece, and 1.8mm between the coil and top plate. Total gap is 9.98mm wide

*Ace*
08-04-2013, 05:34 PM
Price dropped to $325 shipped, probably won't go lower than this. After shipping, whatever money is left will be going towards the next build and it has to be enough to get everything I need.

*Ace*
08-07-2013, 12:59 AM
bump

*Ace*
08-10-2013, 06:36 PM
$275 shipped

*Ace*
08-13-2013, 10:15 PM
bump

*Ace*
08-20-2013, 07:58 PM
bump

*Ace*
08-25-2013, 08:09 PM
bump

supereikenator
08-25-2013, 08:19 PM
How has nobody bought this? I'm sorry man, bump for a gorgeous sub.

*Ace*
08-29-2013, 10:27 PM
bump

*Ace*
09-05-2013, 11:25 PM
bump

*Ace*
09-11-2013, 04:10 PM
price drop $150 plus shipping

joeybutts
09-12-2013, 10:54 AM
Do you have T/S specs for this? Thanks!

Below20hzonly
09-14-2013, 11:30 AM
how much shipped to 56721
price drop $150 plus shipping

*Ace*
09-14-2013, 01:42 PM
Sorry guys, sold!!!