PDA

View Full Version : JL G6600 6 channel



plugitin
06-09-2013, 11:55 AM
Item(s) for Sale:

JL G6600


Item(s) Description/Condition:

Good condition, works like it should, case isnt perfect. 8 out of 10 for looks, 10 out of 10 for performance

Excuse the dust on her...been sitting awhile. PM me on here, or text me at 906-458-7636 for a faster response.

Price:

160 shipped





Item Pictures:
https://lh3.googleusercontent.com/-TSgdYtsxh4A/UbSlBEQ2_6I/AAAAAAAABRc/CAilK2VLAPk/s1280/JL%2520G6600.jpg

Lexicon740iL
06-09-2013, 12:00 PM
Need any batteries?

http://www.caraudio.com/forums/electrical-wiring-classifieds/578348-c-d-high-rate-max-55ah-agm-batteries-cheap.html


I've been looking for a 6 Channel Wanna trade?

plugitin
06-09-2013, 12:54 PM
Need any batteries?

http://www.caraudio.com/forums/electrical-wiring-classifieds/578348-c-d-high-rate-max-55ah-agm-batteries-cheap.html


I've been looking for a 6 Channel Wanna trade?

No thank you, appreciate the offer though.

I also have an Alpine 9886 ill be selling if anyone is interested...

momax_powers
06-09-2013, 09:25 PM
where u located

momofx
06-09-2013, 09:27 PM
Op, I was gonna ask about the specs but I found it, so a quick cut and paste to help ya out :)

•6-channel car amplifier
•at 14.4 volts:◦75 watts RMS x 6 at 4 ohms (110 watts RMS x 6 at 2 ohms)
◦200 watts RMS x 3 bridged at 4 ohms (150 watts RMS x 3 at 8 ohms)

•at 12.5 volts:◦55 watts RMS x 6 at 4 ohms (75 watts RMS x 6 at 2 ohms)
◦150 watts RMS x 3 bridged at 4 ohms (110 watts RMS x 3 at 8 ohms)

•differential-balanced inputs
•Advanced Rollback Protection System
•frequency response: 10 to 25,000 Hz
•variable high- and low-pass filter (50-200 Hz, 12 dB/octave)
•switchable bass boost (0, 6 dB at 48 Hz) on channels 5 and 6 only
•optional wired remote control converts switchable bass boost to fully variable (0-12 dB)
•Absolute Symmetry™ Class-AB amplifier design
•MOSFET power and output stages
•preamp inputs
•speaker-level input with optional converter
•4-gauge power and ground leads and a 60-amp fuse recommended — wiring and hardware not included with amplifier
•no onboard fuses — when installing multiple amps in a system, an additional 60-amp in-line fuse between the distribution block and the amplifier is recommended
•9-1/4"W x 2-1/2"H x 18-1/16"D

plugitin
06-09-2013, 09:58 PM
where u located

Upper Michigan.

plugitin
06-10-2013, 12:21 PM
ttt

plugitin
06-11-2013, 01:26 PM
ttt

plugitin
06-12-2013, 01:39 PM
upp

plugitin
06-14-2013, 12:24 AM
ttt

plugitin
06-15-2013, 10:15 PM
upp

keep_hope_alive
06-15-2013, 11:37 PM
last time you powered it up to test?

more pics of the sides and controls?

thanks

plugitin
06-16-2013, 12:13 AM
last time you powered it up to test?

more pics of the sides and controls?

thanks

Probably 6 or so months ago. Tested all channels in my truck before i sold the truck. Will get you pics tonight or tomorrow. Thanks!

silvercookie
06-16-2013, 05:49 AM
$100 shipped.

plugitin
06-16-2013, 03:14 PM
$100 shipped.

too low bro

https://lh5.googleusercontent.com/-wslLwnBR-_E/Ub4M4FSka-I/AAAAAAAABU0/Ce20KfcuXGI/w1153-h865-no/20130616_140207.jpg

https://lh3.googleusercontent.com/-HN72Dna0yLU/Ub4M7KOMEHI/AAAAAAAABU8/lwj4mlO8cdQ/w1153-h865-no/20130616_140155.jpg

https://lh4.googleusercontent.com/-9e630ZsQ-8M/Ub4M9WO0xzI/AAAAAAAABVE/b_zYqxNl7LM/w1153-h865-no/20130616_140143.jpg

---------- Post added at 03:14 PM ---------- Previous post was at 03:13 PM ----------

https://lh6.googleusercontent.com/-wvXKbrxA5eg/Ub4NAY2AWaI/AAAAAAAABVM/ldY-NZpSwmg/w1153-h865-no/20130616_140150.jpg

https://lh6.googleusercontent.com/-4210faQ8OFU/Ub4NDzMsUFI/AAAAAAAABVU/3PsNP48HJms/w1153-h865-no/20130616_140218.jpg

Just noticed that three of the set screws are missing from the speaker inputs also...150 shipped

plugitin
06-28-2013, 12:55 AM
$old