PDA

View Full Version : 60,000 RMS, yes, you read that right



04murdalanche
06-03-2013, 04:13 AM
Yoo everybody

Got contacted to finish up a monster, freakin absolute monster asss van for a local here.

I don't know a whole lot about the van other than what I do need to know, as I get more info ill be posting it..

Later 80s early 90s, it's on a air set up
Walled at the B-Pillar, 4th order tuned at 45 IIRC
12 15" Tantric HDD's
6 B2 M1S's
2 B2 Quattros on teh mids and highs
4 sets of 8" Crossfire MPX mids
18 XS Power Xp3000s
Not sure what were gonna do for alts yet, he's already got a 330 amp DR44 (late model Chevy monster alt) so I think that's the direction we will take

Now, most of this build has already been completed, a very select few, maybe 2 or 3 of you know who was working on this, some **** came up and he could not finish it and so I am now..

What I will be doing

Building the faceplate/beauty panel/port for the box
Re carpeting the floor
Redoing some wiring
Building a nice center console to house all the switches (Air gauges, amp turn ons, etc.)
Custom door panels with 4 8" Crossfire MPXs per door. Gonna be hella loud.
Doing something with the head liner lol
Finishing off the amp rack and wire up the amps in back
Make beauty panels for the amp rack in back.

Nothing too crazy, but it needs this **** to be finished none the less..

Here's some quick pics I snapped today when I was over there chatting about it

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zpsf727cfed.jpg

Dem subs:crazy:
http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps88649164.jpg

One more needs to be loaded, thank God they did all other 11, I like my back lol..
http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps56c72b3f.jpg

Pic of one of the 6 B2 M1S's this is a 10k powerhouse. Three inputs, it's straight beefy. Look em up online if you've never seen one before
http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps51de0ae5.jpg

The last sub to be loaded
http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps149dae54.jpg

Amp rack and batts, It's steel, line x'd white, batts are XP 3000s, 18 of em
http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps6573624e.jpg

don't worry about the horrible iPhone quality pics.. I'll be bringing my DSLR everyday I go over there now to document this bish till its done

This is my first and probably last huuuuuumoungus build, I hope it's not my last, but ill never run anything this big and I doubt anyone else would have me build their car/truck/van and bedding something this crazy/money involved.. Anyways, more updates coming in the morning,

The only thing that ***** is that now my build is gonna be put on hold-____-

Here's the link to it if you wanna check it out

http://www.caraudio.com/forums/car-audio-build-logs-cars-trucks-suvs/578653-99-tahoe-ipad-fiberglass-sundown-etc.html

More updates tomorrow when I start making some progress

tommydh
06-03-2013, 04:17 AM
pretty sick

04murdalanche
06-03-2013, 04:18 AM
pretty sick

You ain't seen **** yet man! And I don't mean any disrespect by that, just stay tuned..

Spldecendant
06-03-2013, 06:12 AM
I seriously need to see a vid of this beast when done

tommydh
06-03-2013, 06:25 AM
Have fun with that one man If I need that much power im just giving up and going to Utility company for juice. JK

pickup1
06-03-2013, 06:42 AM
Isn't that going to need more than 1 alternator?

BoomBoxStereo
06-03-2013, 01:11 PM
tuned the **** in to this one!!

pimpinr
06-03-2013, 01:18 PM
Upgrade the windows and glass inside the van lol

k3n12ock
06-03-2013, 01:32 PM
Sikk.. Wish I had the funds to get even half of that into my car..

BKNIGHTS
06-03-2013, 01:48 PM
Just a double baffle for 6 15" HDD?

PapaGeno21
06-03-2013, 01:58 PM
The money that went into this.. ****.

Hell of a build.

Imyokedout
06-03-2013, 01:59 PM
Thats awesome! I need to pick up a van.

CHEMMINS
06-03-2013, 02:40 PM
Thats awesome! I need to pick up a van.


SPL VAN For sale New price and updated info - Car Stereo Classifieds (http://www.carstereoclassifieds.org/forum/showthread.php?t=6629)

04murdalanche
06-04-2013, 03:14 AM
I seriously need to see a vid of this beast when done

Stay tuned there will be pleeeeenty.


Have fun with that one man If I need that much power im just giving up and going to Utility company for juice. JK

Lmao no joke!


Isn't that going to need more than 1 alternator?

Where do you see that? There's gonna be more.


tuned the **** in to this one!!

:up2somet:


Upgrade the windows and glass inside the van lol

Upgrade everything in this betch sheeeeit


Sikk.. Wish I had the funds to get even half of that into my car..

Me too man. Meeee too..


Just a double baffle for 6 15" HDD?

That's what I said, should atleast be a triple and would've been if I had this since the beginning. Thank God there's a **** ton of bracing. But still, would rather another baffle be there so there could be less bracing, would look alot better aesthetically as well..


The money that went into this.. ****.

Right at 40k dude

Hell of a build.

Right at 40k dude and it ain't done so its not **** yet but it will be soon

Popwarhomie
06-05-2013, 06:26 PM
Just a double baffle for 6 15" HDD?

First thing I noticed. My double baffle moved a lot with only 1 of 2 18"s in my wall. Cant imagine what will happen with 12 HDDs.

J31Rob
06-07-2013, 08:58 PM
Just a double baffle for 6 15" HDD?

They'll find out quick if they start snapping frames. I'd assume they'll be using quite a bit of another type of bracing however. No point in putting that much into everything else then having a turd for a box.

04murdalanche
06-07-2013, 09:00 PM
First thing I noticed. My double baffle moved a lot with only 1 of 2 18"s in my wall. Cant imagine what will happen with 12 HDDs.

Lol it's 1" think, 2 sheets, should still be thicker IMO. But I was told to finish the van, so that's what I'm doing.


They'll find out quick if they start snapping frames. I'd assume they'll be using quite a bit of another type of bracing however. No point in putting that much into everything else then having a turd for a box.

There wil be **** tons of bracing. More than planned, which will be needed..

I've made a lot of progress just been lazy uploading pics

garretttt4
06-07-2013, 10:29 PM
Daaaaang. Nice man. Can't wait to see better pics / vids.

RSDXzec
06-08-2013, 03:50 AM
subscribed to this, that's just insane

04murdalanche
06-14-2013, 12:07 AM
Port built, will be braced just not yet so calm down people..

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0509_zpse8bda453.jpg

Loading wall

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0510_zps81c7de0a.jpg

Cut out 2 inches all the way around so the drop in port will sit flush

Braces in, it was a tight fit, gonna get sanded and reprinted where it was marred

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0521_zps578e6a2b.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0522_zps3a746978.jpg



Today I wired up most of the batts, pics of that tomorrow. Gonna do the loading wall and what not probably money this beast will be playing at the beginning of next week. Slow but steady progress stay tuned guys

phemps
06-14-2013, 12:34 AM
I reallyyy want to see more of this ******* thing

04murdalanche
06-14-2013, 12:38 AM
I reallyyy want to see more of this ******* thing

You will my friend. Just stay tuned

NIHL8ION
06-14-2013, 12:39 AM
This fvcker looks like it's going to be down right nasty, I wish I had that kind of loot to throw around :greedy:

TaylorFade
06-14-2013, 12:40 AM
Any chance this thing makes it to Scrapin'?

Slo_Ride
06-14-2013, 12:42 AM
http://imageshack.us/a/img216/9892/dsc001870lq.jpg


60,000 tops 45,000. same kinda van tho!

04murdalanche
06-14-2013, 12:43 AM
This fvcker looks like it's going to be down right nasty, I wish I had that kind of loot to throw around :greedy:


Bro you and me both.. Lmao



Any chance this thing makes it to Scrapin'?

I'm trying man.. I'm trying to get it there. But you know you can't rush a build like this in any sort of fashion so idk if its gonna happen but believe me I'm trying to get it done in time because the owner really wants to take it if at all possible..

It will for sure be at Texas Heatwave in Austin In late July.. My Tahoe will be done and there as well

---------- Post added at 11:43 PM ---------- Previous post was at 11:42 PM ----------


http://imageshack.us/a/img216/9892/dsc001870lq.jpg


60,000 tops 45,000. same kinda van tho!

Holy amp rack lmao

n8skow
06-14-2013, 12:07 PM
How are you splitting up the signal RCA's into all the amps?

Fattony911
06-14-2013, 12:21 PM
How are you splitting up the signal RCA's into all the amps?

I'd be willing to bet he's not "splitting" but daisy chaining through the amps outputs. That would be my guess correct me if I'm wrong. Build looks sweet btw just need some more pics :naughty:

04murdalanche
06-15-2013, 12:49 AM
How are you splitting up the signal RCA's into all the amps?


I'd be willing to bet he's not "splitting" but daisy chaining through the amps outputs. That would be my guess correct me if I'm wrong. Build looks sweet btw just need some more pics :naughty:

bro, lmfao..

these amps can be ran as master, slave, or 2nd slave so 3 amps will be one so to speak.. pretty bad *** if you ask me as i dont know any other amps that can do it.. so just two sets of RCA's for the amps, then just strapping RCA's from the master to the two slaves

Fattony911
06-15-2013, 09:41 AM
bro, lmfao..

these amps can be ran as master, slave, or 2nd slave so 3 amps will be one so to speak.. pretty bad *** if you ask me as i dont know any other amps that can do it.. so just two sets of RCA's for the amps, then just strapping RCA's from the master to the two slaves

Forgot about that, feel like an idiot lol and 2nd slave lmfao that's baddazz

04murdalanche
06-15-2013, 09:43 AM
Forgot about that, feel like an idiot lol and 2nd slave lmfao that's baddazz

It's sick when I first saw it, almost confused me. I was like there's no way. That's TOO bad ***

HomeGrown
06-15-2013, 10:25 AM
Following this

alec14
06-15-2013, 11:49 PM
Following this man!

04murdalanche
06-18-2013, 12:37 AM
all soldered up and electrical taped. i didnt like how the "burn" marks were left on the terminals

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0542_zpse160dfa7.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0542_zpse160dfa7.jpg.html)

So i lightly sanded them all

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0547_zpsd591a170.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0547_zpsd591a170.jpg.html)

heat shrink on,

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0572_zpse03638cb.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0572_zpse03638cb.jpg.html)

done, imagine how long it took to do 36 of these lol

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0573_zps79e70152.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0573_zps79e70152.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0574_zpsf482c735.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0574_zpsf482c735.jpg.html)

wire for DAYS brah... this will all be ziptied and for the most part completely hidden as well

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0578_zpsb65d3ef3.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0578_zpsb65d3ef3.jpg.html)
http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0575_zps0ffbf544.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0575_zps0ffbf544.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0576_zpsaf930601.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0576_zpsaf930601.jpg.html)

LEDs that go all the way around the battery rack

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0579_zpsf9ebda4e.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0579_zpsf9ebda4e.jpg.html)

04murdalanche
06-18-2013, 12:50 AM
picked up this little gem too, if your building a wall, these make trim panels ******* cake..

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0569_zps38603f84.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0569_zps38603f84.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0570_zps419a24b4.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0570_zps419a24b4.jpg.html)

Full Tilt
06-18-2013, 01:07 AM
Dat wire...

04murdalanche
06-18-2013, 01:16 AM
Dat wire...

100 feet in power and grounds from batts to amps......

jockhater2
07-11-2013, 03:20 PM
Oh. my. gosh.
Subscribed.

Team Ampere
07-11-2013, 11:11 PM
picked up this little gem too, if your building a wall, these make trim panels ******* cake..

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0569_zps38603f84.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0569_zps38603f84.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0570_zps419a24b4.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0570_zps419a24b4.jpg.html)

where did u foind this scribe at?? was it expensive?? lastly , u saoid it makes trim panels cake. Like , how does it work?? say I have a gap on the sides of my wall, can I use this to mark out trim pirces?? u got any pics of it being used??

04murdalanche
07-13-2013, 10:09 AM
where did u foind this scribe at?? was it expensive?? lastly , u saoid it makes trim panels cake. Like , how does it work?? say I have a gap on the sides of my wall, can I use this to mark out trim pirces?? u got any pics of it being used??

Amazon, $35

For example, you put a flat piece up to your B-pillar. Take the scribe with the bearing, it will roll down the B-pillar and draw on the wood. Go back with a jigsaw and cut it out then it's perfect

SUNDOWNBITCH
09-02-2013, 01:11 PM
And this build? What happened?

04murdalanche
09-02-2013, 01:12 PM
And this build? What happened?

Owner called off the build. Last I heard he's still trying to sell it.. I was like two days from having it playing too..

SUNDOWNBITCH
09-02-2013, 01:13 PM
Owner called off the build. Last I heard he's still trying to sell it.. I was like two days from having it playing too..

Why the hell would he call it off?

04murdalanche
09-02-2013, 01:19 PM
Why the hell would he call it off?

He wasn't sure what he wanted to do. I think he was BS'in though.. but i do know money wasn't an issue. If I was 40k deep in a project I **** sure wouldn't call it off

phemps
09-02-2013, 01:19 PM
Owner called off the build. Last I heard he's still trying to sell it.. I was like two days from having it playing too..

:suicide:

Ahmed Johnson
09-02-2013, 01:20 PM
Lol
have fun with that one man if i need that much power im just giving up and going to utility company for juice. Jk

04murdalanche
09-02-2013, 01:21 PM
:suicide:

You're telling me.. The time I had in soldering and heatshrinking the lugs to go from
The batts to amps was way longer than you'd ever wanna know

Braindead
09-02-2013, 01:22 PM
Good jesus this things a weapon of mass destruction.

SUNDOWNBITCH
09-02-2013, 01:26 PM
:crying:

04murdalanche
09-02-2013, 07:53 PM
Good jesus this things a weapon of mass destruction.

Lolol


:crying:

I was too:/ I didn't get paid nearly what I was expecting either

Braindead
09-02-2013, 08:03 PM
You should've taken the van off his hands as payment.

04murdalanche
09-02-2013, 08:10 PM
You should've taken the van off his hands as payment.

I wish.. How I'd love to be doing 160+ daily

phemps
09-02-2013, 11:42 PM
You're telling me.. The time I had in soldering and heatshrinking the lugs to go from
The batts to amps was way longer than you'd ever wanna know

i hope you at least got reimbursed well for that

mazdakid
09-28-2013, 08:55 AM
Did the owner call off the build or just get someone more skilled to do it for him?

pickup1
09-28-2013, 09:06 AM
Did the owner call off the build or just get someone more skilled to do it for him?
Dang dude,raggin on everybody today.

mazdakid
09-28-2013, 09:08 AM
Just had to ask after seeing the doors he made for Timmy.

des343
09-28-2013, 11:11 AM
I just don't understand where people get or even if they have loads of money where it makes sense to blow it on something so dumb...I mean honestly I'm all about loud but comes to a point of flat out stupid after a point IMO...but whatever :wow: