PDA

View Full Version : 99 Tahoe, ipad, fiberglass, sundown, etc..



04murdalanche
06-01-2013, 04:01 AM
So as some of you guys know, I sold my Silverado about 2 weeks ago:( just wasn't big enough for me and taking my **** back and forth to school, long story but I ended up with this Tahoe on the cheaps.

1999 Tahoe 2wd
Power everything
2 previous owners (guy I bought it from has it since '01)
Brand new paint
Brand new rims and tires
Flowmaster exhaust
The list goes on and on..

System wise going in here will consist of


iPad mini, flush but removable dash
Rf 360.3
In between the seats will be a center console from a 03 Tahoe/silverado chopped up and glassed so it meets up to the dash and looks good.
2 sets of tantric comps, I think I'm gonna do door pods..
Tweets in the A-Pillar, got a sick idea for those.
Amps all under the rear seat (SAZ 3500 and 2 sax 125.2s)
2 18" nightshades
All Knu Conceptz RCAs
4 total runs Sky High and Knu 1/0 (2 pos and 2 neg)
AT 10 gauge for speakers and subs, over kill for mids lmao
Ps2 under the pass seat for le entertainment.

That's pretty much it I think, eventually the interior, well atleast the seats will be completely redone in black leather and a dark, dark grey suede.

Anywho, here's some pics of the truck

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps23b5df1d.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps2c4759ce.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0483_zps498b9377.jpg

Started off with some deadening

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0481_zps683bfb2f.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0480_zps32a27ffa.jpg


It's not a build till you bleed lol

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0484_zps3ea0e3b4.jpg

Anywho, onto more deadening

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0486_zpsaa1463f0.jpg

Door were pretty solid to begin with, pass side done

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0488_zps50a81058.jpg

Driver side done

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0489_zpsba70c8d5.jpg

Halfway done deadening, still gotta do the roof and great stuff it. More pics coming
So far I've got the rear hatch and front doors done, the rest, aka the roof, I will be going tomorrow

04murdalanche
06-01-2013, 04:06 AM
Tonight I slowly began removing all of the interior, carpet will be getting dyed black, alot of pieces bedlinered, etc.

Here's a possible amp rack design I'm thinkin about, it's a shame they won't good in there like to where they look like they are one long *** amp, just barely doesn't fit

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps7cf7013b.jpg

Silverado SS
06-01-2013, 04:59 AM
Sorta jealous, sounds to be an awesome build. To bad you got rid of your Silverado, I love mine. Have you seen the build of mine?

04murdalanche
06-01-2013, 01:03 PM
Sorta jealous, sounds to be an awesome build. To bad you got rid of your Silverado, I love mine. Have you seen the build of mine?

It's gonna be sweet man:veryhapp:

Link me up to your log



More pics coming later on today!

Silverado SS
06-01-2013, 04:13 PM
It's gonna be sweet man:veryhapp:

Link me up to your log

More pics coming later on today!

Here it is http://www.caraudio.com/forums/car-audio-build-logs-cars-trucks-suvs/578360-dual-15-sp4-silverado-ss-build.html

04murdalanche
06-02-2013, 11:10 AM
I've been very sick the past few days but still made a little bit of progress

Fuckin seat got me as I was taking it out

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0495_zpsb03bc17b.jpg

I'm taking out all of the interior to dye the carpet black, deaden and spray foam the roof, sorry I don't have more pics, being sick *****. Updates coming soon though

black05alti
06-03-2013, 05:59 AM
tuned in for some more progress..

04murdalanche
06-03-2013, 06:03 AM
tuned in for some more progress..

Thanks man, ill have lots once I finish up with the monster that's linked in my build log. Probably 2-3 weeks sadly

Popwarhomie
06-03-2013, 06:53 AM
Clean tahoe! :)

serjr711.
06-03-2013, 07:04 AM
****, wish I had a Tahoe. Wish you were local so you could do my doors.

RangerDangerV2
06-03-2013, 08:41 AM
gah... do a 6th in that bish homie. :p

04murdalanche
06-03-2013, 12:50 PM
Clean tahoe! :)


Thanks bro!


****, wish I had a Tahoe. Wish you were local so you could do my doors.
Maannn, trade me your silverado;) and I can do your doors, for really cheap shipping costs too. If your seriously interested I can make it happen bro. Like CHEAP shipping back and forth to you. Like $20 cheap... Lol let me know, PM me mayne


gah... do a 6th in that bish homie. :p

One day, I will.. I wanna try some weird **** but for now, I'm just gonna do a nice large box, similar to yours but taller, port will be up because cabin gain, and because I don't care about numbers at all.. Although A 150 wouldn't **** me off lol

pro-rabbit
06-03-2013, 01:23 PM
Get to work so you can have a reason to come up here next weekend :p:

BoomBoxStereo
06-03-2013, 01:41 PM
tuned into this Jeff! the Guckenhoe looks good

04murdalanche
06-04-2013, 04:15 AM
Get to work so you can have a reason to come up here next weekend :p:

:( ill be slaving on the van, all in due time though


tuned into this Jeff! the Guckenhoe looks good

The Guckenhoe Hahahahahaha, but hell yeah man it's gonna be great

04murdalanche
06-09-2013, 10:42 PM
pics coming later tonight, got some carpet dyed black, head liner is out, roof foamed and deadened.

oh, and I decided that Ill be doing a CT Sounds 7k (Audio Technix) and a CT Sounds 125.4.. oh yeah

skylineTT
06-12-2013, 02:37 PM
Nice meetin up with you yesterday for that basket brah. I'll text you John's number real quick so you have a paint/body/upholstery guy.

Silver-N-Black
06-12-2013, 04:34 PM
Looking good Murdahoe, going to keep my eye on this. I want to see how that 360.3 works for you. I'm in the process of maybe picking one up but not sure yet.

Timmy13091
06-12-2013, 04:56 PM
pics coming later tonight, got some carpet dyed black, head liner is out, roof foamed and deadened.

oh, and I decided that Ill be doing a CT Sounds 7k (Audio Technix) and a CT Sounds 125.4.. oh yeah

:toast: gunna be nasty !!!

04murdalanche
06-12-2013, 05:29 PM
Nice meetin up with you yesterday for that basket brah. I'll text you John's number real quick so you have a paint/body/upholstery guy.

Fa sho thanks man I appreciate it.. Like I said let me know if you need any audioz, picked up a job for another set of door panels last nights and he's giving me a AP 3k, crunch 2.150, and some other **** too for payment so I got audioz laying around lul


Looking good Murdahoe, going to keep my eye on this. I want to see how that 360.3 works for you. I'm in the process of maybe picking one up but not sure yet.

Thanks bro.. Timmy13091 ; got my thinking about a bit ten D and I'm still thinking about it now.. But I think I'm gonna stay with the 360.3.. Just depends on how cheap I could get a bit ten. We shall see soon..


:toast: gunna be nasty !!!

Hell yeah man:) I can't wait..

Silver-N-Black
06-13-2013, 09:22 AM
Thanks bro.. Timmy13091 ; got my thinking about a bit ten D and I'm still thinking about it now.. But I think I'm gonna stay with the 360.3.. Just depends on how cheap I could get a bit ten. We shall see soon..
[/QUOTE]


Isn't the Bit one and 360.3 on the same level. I stopped looking at the Bit one due to its price. Never really looked at the Ten as it did half the thing the One does.

Fattony911
06-13-2013, 10:36 AM
Hell yeah man looks sick!!

04murdalanche
06-13-2013, 08:17 PM
Thanks bro.. Timmy13091 ; got my thinking about a bit ten D and I'm still thinking about it now.. But I think I'm gonna stay with the 360.3.. Just depends on how cheap I could get a bit ten. We shall see soon..



Isn't the Bit one and 360.3 on the same level. I stopped looking at the Bit one due to its price. Never really looked at the Ten as it did half the thing the One does.[/QUOTE]

RF 360.3 shits all over both of them.. did some more research and definitely getting one.


Hell yeah man looks sick!!

thanks man..


Well everyone, plans have changed again.. Talked to Coleman and the 7k wont be here till august. im not waiting for that long so Im gonna go ahead and get a B2 M1S, same amps that are going in the van im building..

gonna sell my saz 3500, sax 125.2s if anyones interested and get a DC 175.4 for the tantric mids that came in the mail today

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps181b5bc2.jpg (http://s261.photobucket.com/user/hhawksqb1/media/null_zps181b5bc2.jpg.html)

redrider
06-13-2013, 09:37 PM
would be a sick ride to lay frame with.......

04murdalanche
06-14-2013, 12:48 AM
would be a sick ride to lay frame with.......

Hell yeah it would, **** tons of pics uploading..

---------- Post added at 10:48 PM ---------- Previous post was at 10:48 PM ----------

Mids came in today...

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps5882019a.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps98e91ab2.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zpsf1b2ad35.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zpscfe17cbb.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zpsa3f64ed4.jpg

These are soooo beastly. Can't wait to get em hooked up. Gonna run two pairs of these on a DC 175.4. Should be nice n loud

04murdalanche
06-14-2013, 12:59 AM
Took the carpet out to dye it black

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0536_zpsa81a4c8d.jpg

Seats out. Vacuuming. Cluster ****..

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0535_zps3e2e6730.jpg

Dat deadener

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0534_zps2c6a6af0.jpg

All foamed up

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0532_zpsf3421131.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0531_zps97c77bcf.jpg

Head liner out so I can glass up alot of the holes, smooth it out, and wrap it in black suede, and of course, deaden.. Lol

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0526_zps98a83ca4.jpg

New grille, new head light housings, gonna order some new HIDs, these are acting weird

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0517_zps3c0fff7e.jpg

Roof is all deadened and foamed but of course my camera died so I didn't get pics-___-

Timmy13091
06-14-2013, 01:12 AM
Took the carpet out to dye it black

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0536_zpsa81a4c8d.jpg

Seats out. Vacuuming. Cluster ****..

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0535_zps3e2e6730.jpg

Dat deadener

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0534_zps2c6a6af0.jpg

All foamed up

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0532_zpsf3421131.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0531_zps97c77bcf.jpg

Head liner out so I can glass up alot of the holes, smooth it out, and wrap it in black suede, and of course, deaden.. Lol

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0526_zps98a83ca4.jpg

New grille, new head light housings, gonna order some new HIDs, these are acting weird

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0517_zps3c0fff7e.jpg

Roof is all deadened and foamed but of course my camera died so I didn't get pics-___-

Ya buddy .. You know how I feel about that truck that new grille is :boobiez:

04murdalanche
06-14-2013, 01:16 AM
Ya buddy .. You know how I feel about that truck that new grille is :boobiez:

Wait till ya see the black mesh I got for it.. Gonna set it off.


Your build logs coming up next bro

slvrado28z
06-14-2013, 01:24 AM
nice tahoe always wanted that bodystyle are those 24s

04murdalanche
06-14-2013, 01:25 AM
nice tahoe always wanted that bodystyle are those 24s

Yessir they are. And thanks man I appreciate it

04murdalanche
06-14-2013, 03:50 AM
Been thinking and I'm considering doing some one off custom head lights, gonna replace the lower DRLs with some nice LED bulbs and do strips in them, not ricey like you make think, simple and classy. More on that later though it will be a while.

04murdalanche
06-18-2013, 01:55 AM
well everyone has decided to come over this sunday and help me on the tahoe, make some real pregress so ill have lots of it soon guys, please be patient.. i have lots of sheit goin on, tryna make lots of moves on the van, build 5 different door panels, sheit man, im busy.. but its good though.

bassman_soundki
06-22-2013, 04:45 PM
I am interested in researching those separates you have!
How do you shop for them?
Tanrcics' website doesnt work well, or needs serious help it seems.

black05alti
06-22-2013, 04:47 PM
I am interested in researching those separates you have!
How do you shop for them?
Tanrcics' website doesnt work well, or needs serious help it seems.

Talk to tantric on facebook or send them an email

04murdalanche
06-23-2013, 03:24 AM
I am interested in researching those separates you have!
How do you shop for them?
Tanrcics' website doesnt work well, or needs serious help it seems.

Guess you meant speakers. If your serious PM me about it and ill guide you

04murdalanche
06-27-2013, 12:45 PM
So some **** happened, long story short I got a DC 5k and a 175.4 to match, will be going in this weekend and this will be playing, temp HU for how ill be ordering the RF 360.3 next week, hopefully my last set of tantric mids as well.

TheycallmeJT
06-27-2013, 01:07 PM
**** you Jeff how could you let me miss this ?!? Looks great! We need to get together some time and kick it. Let me know when you start doing your interior cause I may be able to help ya out. Just finished up with an upholstery course :)

04murdalanche
06-27-2013, 01:09 PM
**** you Jeff how could you let me miss this ?!? Looks great! We need to get together some time and kick it. Let me know when you start doing your interior cause I may be able to help ya out. Just finished up with an upholstery course :)

My bad mayne my bad!!!! Lol

Ill be wanting my seats done around Christmas time probably:yumyum:

TheycallmeJT
06-27-2013, 10:21 PM
My bad mayne my bad!!!! Lol

Ill be wanting my seats done around Christmas time probably:yumyum:
Excuses Excuses Sir! I will not deal with that lol

RidnClean
06-29-2013, 12:27 AM
**** i walked into this thread hoping to snag some ideas lol.
i got a 00 limited, i got a game plan for mine but you're some steps ahead of me, look out for the log soon.
this is going to be sick!

04murdalanche
07-02-2013, 01:16 AM
Excuses Excuses Sir! I will not deal with that lol

forreal though PM me i want my seats done


**** i walked into this thread hoping to snag some ideas lol.
i got a 00 limited, i got a game plan for mine but you're some steps ahead of me, look out for the log soon.
this is going to be sick!

**** wait about 10 minutes your about to start getting ideas..

04murdalanche
07-02-2013, 01:28 AM
big *** update, ive almost got this bish playing..

ill let the pics do da talking

finished dying the carpet

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0636_zps2a4b6aa0.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0636_zps2a4b6aa0.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0636_zps2a4b6aa0.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0636_zps2a4b6aa0.jpg.html)

still need to do the front bumper. ahhhh soo much to do, soon though

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0638_zps8b6994b1.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0638_zps8b6994b1.jpg.html)

wire in, carpet in

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0640_zps9ab3b631.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0640_zps9ab3b631.jpg.html)

clusterfvck under the hood

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0642_zps9e58be2d.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0642_zps9e58be2d.jpg.html)

bedlinered alot of my interior pieces, others will get wrapped in vinyl, etc...

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0646_zps749c6f8f.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0646_zps749c6f8f.jpg.html)

B-Pillars

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0647_zpsd07422a9.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0647_zpsd07422a9.jpg.html)

kicks and door sills

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0649_zps63a958c1.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0649_zps63a958c1.jpg.html)

5k is as small as the 3500 is lmao

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0652_zpsd763826b.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0652_zpsd763826b.jpg.html)

reppin my dude Jon, owner of Sky High, he hooks it up all the time for me

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0656_zps02c5f859.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0656_zps02c5f859.jpg.html)

04murdalanche
07-02-2013, 01:31 AM
alt all wired up

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0657_zps965c7a12.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0657_zps965c7a12.jpg.html)

bad *** battery terminals

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0658_zpsdb9b00ed.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0658_zpsdb9b00ed.jpg.html)

did like a big 9 under the hood lol fvck the big 3
http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0659_zpsf157dd18.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0659_zpsf157dd18.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0660_zpse522b7db.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0660_zpse522b7db.jpg.html)

had to hammer the hood in to clear the blocks

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0661_zpsb5db7719.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0661_zpsb5db7719.jpg.html)

temp box i picked up for a cheap $20, 10 net @ 32, itll do until i get my level 6s around christmas time

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0662_zpsaeb24995.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0662_zpsaeb24995.jpg.html)

04murdalanche
07-02-2013, 01:36 AM
started my door panels as well

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0681_zpsf82e3ad1.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0681_zpsf82e3ad1.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0683_zps4aa59938.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0683_zps4aa59938.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0689_zps2a7a48b5.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0689_zps2a7a48b5.jpg.html)

other side

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0690_zps00ffa991.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0690_zps00ffa991.jpg.html)

flush that bish

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0691_zpsda3d306a.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0691_zpsda3d306a.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0692_zps8c9abe31.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0692_zps8c9abe31.jpg.html)

adapter harness so the alt charges. right at 15.1

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0693_zps94db0a6e.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0693_zps94db0a6e.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0695_zps5fd34257.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0695_zps5fd34257.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0696_zps0dd960de.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0696_zps0dd960de.jpg.html)

installed

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0699_zps9ef4bedd.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0699_zps9ef4bedd.jpg.html)

04murdalanche
07-02-2013, 01:37 AM
frame ground in back for teh batts

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0701_zpsd82f2fed.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0701_zpsd82f2fed.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0702_zps92dcdd00.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0702_zps92dcdd00.jpg.html)



plenty more to come tomorrow!

tommydh
07-02-2013, 02:32 AM
I've been very sick the past few days but still made a little bit of progress

Fuckin seat got me as I was taking it out

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0495_zpsb03bc17b.jpg


I'm taking out all of the interior to dye the carpet black, deaden and spray foam the roof, sorry I don't have more pics, being sick *****. Updates coming soon though

It just isn't a build without blood is it?

04murdalanche
07-02-2013, 02:43 AM
It just isn't a build without blood is it?

so true, so true, lol

TheycallmeJT
07-02-2013, 10:54 AM
**** man been putting in work

04murdalanche
07-02-2013, 11:03 AM
**** man been putting in work

Yessir. Gonna be doing alot more today too.

TheycallmeJT
07-02-2013, 12:53 PM
Yessir. Gonna be doing alot more today too.
Sweet, Too bad your not closer so I could give ya a hand. Me n Robert may be taking a trip out to Dallas this weekend to pick up 2 18" TSNS for his lancer

RidnClean
07-04-2013, 07:03 PM
definitely puttin in work i see

westman995
07-04-2013, 07:43 PM
http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0699_zps9ef4bedd.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0699_zps9ef4bedd.jpg.html)

Nice alt.. haha
http://i242.photobucket.com/albums/ff177/westman995/550338_568081559888958_1951365922_n.jpg

04murdalanche
07-04-2013, 09:02 PM
Sweet, Too bad your not closer so I could give ya a hand. Me n Robert may be taking a trip out to Dallas this weekend to pick up 2 18" TSNS for his lancer

Wish you could lend me a hand too, sheit lol


definitely puttin in work i see


Hellz yeah bro.. I'm gettin close now.



Nice alt.. haha
http://i242.photobucket.com/albums/ff177/westman995/550338_568081559888958_1951365922_n.jpg

Nice. Lol bet I paid less for mine though(;

Can't give up my AC through fvck that.. You don't need it though I got fam in Duluth right off Lake Superior.. Don't ever need AC up there, where'd you get the bracket, though?

westman995
07-05-2013, 01:26 AM
Wish you could lend me a hand too, sheit lol




Hellz yeah bro.. I'm gettin close now.




Nice. Lol bet I paid less for mine though(;

Can't give up my AC through fvck that.. You don't need it though I got fam in Duluth right off Lake Superior.. Don't ever need AC up there, where'd you get the bracket, though?

Wanna bet?? Haha, how much did you pay for it? I got mine on the cheap also.. My truck never had ac since I got it, it was already disconnected cuz they were tearing the motor apart. If it still worked I would have left it, I may put it back on tho.. Made the bracket at home, wasn't too hard to do. Used the stock belt and since ac was already disconnected wasn't a big deal to me haha

04murdalanche
07-05-2013, 02:35 AM
Wanna bet?? Haha, how much did you pay for it? I got mine on the cheap also.. My truck never had ac since I got it, it was already disconnected cuz they were tearing the motor apart. If it still worked I would have left it, I may put it back on tho.. Made the bracket at home, wasn't too hard to do. Used the stock belt and since ac was already disconnected wasn't a big deal to me haha

I paid 340 shipped for mine, was lightly used.

And niiice. You gonna fab up a dual alt bracket to save the AC? If you do do me know ill buy one from you

westman995
07-05-2013, 06:56 PM
I paid 340 shipped for mine, was lightly used.

And niiice. You gonna fab up a dual alt bracket to save the AC? If you do do me know ill buy one from you

I got mine quite a bit cheaper than that, but I think it was a little more than lightly used haha.. But it still does work.. I paid 200 shipped for it. I had to make some new spacers for the mounting cuz someone modified it for another vehicle. Is yours the 270?

Ya what I want to do is put the ac back in place and build a dual alt bracket right next to the ac, I have seen a few setups like that for these motors. Hopefully not too hard to make. Ill see what I can come up with tho.

RidnClean
07-06-2013, 06:32 PM
if you can steal someones DC alt bracket, they make one off the AC

04murdalanche
07-07-2013, 02:12 AM
I got mine quite a bit cheaper than that, but I think it was a little more than lightly used haha.. But it still does work.. I paid 200 shipped for it. I had to make some new spacers for the mounting cuz someone modified it for another vehicle. Is yours the 270?

Ya what I want to do is put the ac back in place and build a dual alt bracket right next to the ac, I have seen a few setups like that for these motors. Hopefully not too hard to make. Ill see what I can come up with tho.

$200 shipped.... Wow....

And yeah I got the 270, let me know what you do end up coming up with I'm definitely considering running two


if you can steal someones DC alt bracket, they make one off the AC

That would be lovely lol

BIG BIG update coming tomorrow. Got the sub stage playing today, lets just say my roof looks like jelly.. Lolol

Pictures and videos coming tomorrow

westman995
07-07-2013, 10:17 PM
Ya I almost didn't even THINK about it when I saw it.. Saw it posted and asked him to hold it for me to put money in my account the next day and snatched it up.. Its got an extra hole in it in the mounting tabs.. I know its been passed around cuz I know at least two others have owned it before me on the forums, and I believe at least one more, if not more haha..

Have a question/favor if you don't mind. When you're vehicle is cold (not been running for a while) and if you start it up, start pounding on your system for a minute or two and then feel the alt, is it warm/hot?? I did this twice now, just start it up and pound it for a minute, not even driving it and the dc is pretty **** hot.. while my stock one while be COLD.. Maybe its just how they work but just curious..

Would be sweet if someone had a bracket to copy.. The one I want to make adds two alts next to the ac, then you have your stock alt location for a total of three. I have seen the same thing but with just one next to the ac. I think that would be fairly easy to make. I have been collection pics from all over of brackets for these motors.. its weird that dc or anyone else doesn't post brackets for these motors, jus the 2000 and newer 5.3's

RidnClean
07-07-2013, 10:32 PM
Westman im in the same boat. I only need 1 cause my class only allows 2 total.
DC said they cant even do it lol.

CerwinVega_Fan
07-11-2013, 09:03 PM
Update?

RangerDangerV2
07-11-2013, 09:05 PM
needs more 4th order! jk update this shiz son

04murdalanche
07-11-2013, 09:07 PM
Update?

[QUOTE=RangerDangerV2;8431471]needs more 4th order! jk update this shiz son[/QUOTE
30 pics uploading right now ****:fro:

04murdalanche
07-11-2013, 09:36 PM
bussbar time

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0717_zps649ac568.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0717_zps649ac568.jpg.html)

first ones i made on the left, second on the right, obviously lol

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0718_zps25122f8c.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0718_zps25122f8c.jpg.html)

wiring em up

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0719_zps84e79ee3.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0719_zps84e79ee3.jpg.html)

wiring em up, heat shrink n sheit

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0720_zps7a39f8c7.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0720_zps7a39f8c7.jpg.html)

beginning of the amp rack

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0721_zps0ef23853.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0721_zps0ef23853.jpg.html)

time to refresh the temp box

before

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0722_zps3ea79a57.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0722_zps3ea79a57.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0723_zpse86a2389.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0723_zpse86a2389.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0724_zps07f8aec8.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0724_zps07f8aec8.jpg.html)

removed, filled and sanded all those shits

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0725_zps33846a30.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0725_zps33846a30.jpg.html)

RangerDangerV2
07-11-2013, 09:38 PM
lmao... dem SCREEEEEEEEWS! why so many? liking the progress though

04murdalanche
07-11-2013, 09:48 PM
filled and smoothed all these holes

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0726_zpsd83d5d87.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0726_zpsd83d5d87.jpg.html)

port smoothed, rounded over and primed

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0727_zps1517f38c.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0727_zps1517f38c.jpg.html)

started plasti dipping the windows, no finished pics but they look way better than this now

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0728_zps4bab740e.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0728_zps4bab740e.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0729_zps88ecc07a.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0729_zps88ecc07a.jpg.html)

splatter paint on the box

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0730_zpsbc203733.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0730_zpsbc203733.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0731_zpsdbc13956.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0731_zpsdbc13956.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0732_zpsa61f5b09.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0732_zpsa61f5b09.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0733_zps1f15a9c6.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0733_zps1f15a9c6.jpg.html)

04murdalanche
07-11-2013, 09:51 PM
DD B1 tweets courtesy of my boy Timmy13091 ;

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0734_zps5f6118cd.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0734_zps5f6118cd.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0735_zps25404428.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0735_zps25404428.jpg.html)

the *** on these ******* is absurd..

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0736_zps8259e634.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0736_zps8259e634.jpg.html)

taped up

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0737_zpsba50b428.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0737_zpsba50b428.jpg.html)

plasti dipped and splatter painted as well, plasti dip is removable for those of you who dont know

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0738_zps4a30e2d3.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0738_zps4a30e2d3.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0739_zps82e1d962.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0739_zps82e1d962.jpg.html)

04murdalanche
07-11-2013, 09:53 PM
workin on **** with my boys, yeah we roll deep. lol

from the left

tahoe on 6s, saz 3500, 4 sa 15s
tahoe on 2s, walled 8 15s on 8k
explorer on 2s, 2 dc level 6 m3s walled in a 4th on a m4a
my tahoe on 4s.

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0740_zps31ac3971.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0740_zps31ac3971.jpg.html)

04murdalanche
07-11-2013, 10:23 PM
everythings in and playing and i have no pics or vids... lmao ill make some tonight for yall

RangerDangerV2
07-11-2013, 10:25 PM
everythings in and playing and i have no pics or vids... lmao ill make some tonight for yall

what are you thinking number wise?

04murdalanche
07-11-2013, 10:28 PM
lmao... dem SCREEEEEEEEWS! why so many? liking the progress though

I didn't build the box, bought it for $20, couldn't really go wrong lol


what are you thinking number wise?

Ah, idk. Hopefully a 150.. I'm not trippin if it doesn't though. Don't really care what numbers it does until I get the level 6s. Box is a straight music box. I'm sure it'll pop a 150 though. We'll see. It does maddddd work in the mid 30s. Box I build for the level 6s will be straight for lows though.

RangerDangerV2
07-11-2013, 10:38 PM
I didn't build the box, bought it for $20, couldn't really go wrong lol



Ah, idk. Hopefully a 150.. I'm not trippin if it doesn't though. Don't really care what numbers it does until I get the level 6s. Box is a straight music box. I'm sure it'll pop a 150 though. We'll see. It does maddddd work in the mid 30s. Box I build for the level 6s will be straight for lows though.
do a 4th order!!! lol

RidnClean
07-12-2013, 11:42 AM
Looks good.
Need some installed pics

NIHL8ION
07-12-2013, 11:47 AM
NICE :cool: I'm really diggin' the splatter paint :yumyum: That ish looks wayy better than it did b4 lol

04murdalanche
07-13-2013, 04:28 AM
Looks good.
Need some installed pics

yes i do.. leaving for florida in 30 mins for a week so it will have to wait lol


NICE :cool: I'm really diggin' the splatter paint :yumyum: That ish looks wayy better than it did b4 lol

thanks bro

Fattony911
07-13-2013, 10:34 AM
yes i do.. leaving for florida in 30 mins for a week so it will have to wait lol



thanks bro


You're not kiddin about rollin deep lmao, where in FL are you headed

04murdalanche
07-13-2013, 11:05 AM
You're not kiddin about rollin deep lmao, where in FL are you headed

Destin:D

04murdalanche
07-13-2013, 11:19 AM
Posted up on the freeway the other night

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps52670ea0.jpg

04murdalanche
07-21-2013, 11:12 PM
360.3 should be in any day now and i will then be starting the center console build along with finishing up the door pods, got a few surprises for you guys, stay tuned.

RidnClean
07-21-2013, 11:13 PM
Were the HIDs easy to drop in?

04murdalanche
07-21-2013, 11:28 PM
Were the HIDs easy to drop in?

very, were some cheap *** ones i put in there for now, gonna do a Projector retrofit down the road

RidnClean
07-21-2013, 11:30 PM
Yeah im too lazy to order some and install.
Stock is fine for now.

So those finished pics lol.
Just got my setup in today but gotta clean it all up

04murdalanche
07-21-2013, 11:32 PM
Yeah im too lazy to order some and install.
Stock is fine for now.

So those finished pics lol.
Just got my setup in today but gotta clean it all up

i hear ya..


im in the process of getting the interior back in now. soon soon

04murdalanche
08-06-2013, 12:28 AM
updates updates updates

lots o' **** changing..

tantrics are gone, i think im gonna keep these anarchys forever.. by far the most musical, punchy mid ive ever heard..

they are absolute monsters. idk how my window still rolls down

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0795_zps0e5ba35d.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0795_zps0e5ba35d.jpg.html)

assssssss

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0796_zps1083ef52.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0796_zps1083ef52.jpg.html)

took the old ugly beaner tail lights, got some stock ones and smoked em

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0799_zps7c2132fb.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0799_zps7c2132fb.jpg.html)

installed

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0803_zpsa7cc3706.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0803_zpsa7cc3706.jpg.html)

box and subs in(:

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0804_zpsd8983e45.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0804_zpsd8983e45.jpg.html)

batteries, 4 total dekas now.. and a C&D 300.. 400 ah total couldnt use the bussbars due to the port getting choked on the hatch:verymad:

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0805_zpse0556ef4.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0805_zpse0556ef4.jpg.html)

amp rack

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0806_zps1452d14d.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0806_zps1452d14d.jpg.html)

need to go back and redo the power and ground on the 175.4 but i was getting eager to hear it so i rushed along... stupid me:crap:

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0807_zps831fdd65.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0807_zps831fdd65.jpg.html)

04murdalanche
08-06-2013, 12:31 AM
dat 5k.. loves being at .5 too(;

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0808_zpsb0037b58.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0808_zpsb0037b58.jpg.html)

dont mind the speaker wire hanging out, its since been zip tied up and out of the way lol.. i was just astonished the door panel still fits even with the anarchys in there.. you guys cant understand how big those **** things are till you see em.. they are HUUUGE. tweets installed as well

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0809_zpse33f9be1.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0809_zpse33f9be1.jpg.html)

dont mind my mess.. lol RF 360 temp installed to test, test test.. and what do you know, i got a dud...:verymad: thought it was me at first, changed my grounds, tried everything.. its a goner:(

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0810_zpsd39ed8bb.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0810_zpsd39ed8bb.jpg.html)

so i picked up this in the mean time, Alpine 9833, trades some RCAs for it lmao... 4v pre outs, Time correction, bad *** crossover.. all for $5 out of my pocket.

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0812_zps1067a812.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0812_zps1067a812.jpg.html)

second of 4 sets anarchys i plan on running got here today via BigSix ; thanks again bro

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0815_zpsceeb963d.jpg (http://s261.photobucket.com/user/hhawksqb1/media/DSC_0815_zpsceeb963d.jpg.html)

videos coming in about an hour stay tuned, they are uploading now..

04murdalanche
08-06-2013, 12:31 AM
vids

SUNDOWNBITCH
08-06-2013, 12:38 AM
Hah gayyyyyyyy

04murdalanche
08-06-2013, 12:41 AM
Hah gayyyyyyyy

all i heard was "im jelly"

RidnClean
08-06-2013, 12:49 AM
Didn't motivate me lol

04murdalanche
08-06-2013, 12:52 AM
Didn't motivate me lol

Lmfao.. Well my next enclosure will.. I sold the nightshades today and bought some Fi SP4s, baskets and motors are too **** not to show em off so I'm gonna do plexi on the next box, playing it white, LEDs yadda yadda. That should motivate you(;

SUNDOWNBITCH
08-06-2013, 01:02 AM
Lmfao.. Well my next enclosure will.. I sold the nightshades today and bought some Fi SP4s, baskets and motors are too **** not to show em off so I'm gonna do plexi on the next box, playing it white, LEDs yadda yadda. That should motivate you(;

That wouldn't even motivate me. This build log :thumbcool:

---------- Post added at 12:02 AM ---------- Previous post was at 12:02 AM ----------


Lmfao.. Well my next enclosure will.. I sold the nightshades today and bought some Fi SP4s, baskets and motors are too **** not to show em off so I'm gonna do plexi on the next box, playing it white, LEDs yadda yadda. That should motivate you(;

That wouldn't even motivate me. This build log :thumbcool:

SUNDOWNBITCH
08-06-2013, 01:03 AM
Lmfao.. Well my next enclosure will.. I sold the nightshades today and bought some Fi SP4s, baskets and motors are too **** not to show em off so I'm gonna do plexi on the next box, playing it white, LEDs yadda yadda. That should motivate you(;

That wouldn't even motivate me. This build log :thumbcool:

04murdalanche
08-06-2013, 01:04 AM
That wouldn't even motivate me. This build log :thumbcool:

triple post? u bored bro?

04murdalanche
08-06-2013, 01:05 AM
That wouldn't even motivate me. This build log :thumbcool:

triple post? u bored bro?

04murdalanche
08-06-2013, 01:05 AM
That wouldn't even motivate me. This build log :thumbcool:

triple post? u bored bro?

SUNDOWNBITCH
08-06-2013, 01:08 AM
triple post? u bored bro?

"Triple post? U bored bro?"

RidnClean
08-06-2013, 01:20 AM
I just chopped my box. It was port up and now port back tuned at 50hz lol.
Gotta add some port. My port is also being choked cause batts. My runs aren't long enough now to move em either

04murdalanche
08-06-2013, 01:23 AM
I just chopped my box. It was port up and now port back tuned at 50hz lol.
Gotta add some port. My port is also being choked cause batts. My runs aren't long enough now to move em either

**** i feel your pain on that BS.. happened to me with the silverado.. ****s


http://www.youtube.com/watch?v=sP1j99lZdEA&feature=youtu.be

SUNDOWNBITCH
08-06-2013, 01:28 AM
Your my hero Jeff :blush:

04murdalanche
08-06-2013, 02:28 AM
mids and highs testing, i was flipping out lmao


http://www.youtube.com/watch?v=z_t3ELoR9IU

04murdalanche
08-06-2013, 06:08 AM
stuff i still need to do

ipad dash
custom center console
glass my doors
build a box for the SP4s
thinking about moving the amps back to behind the seats maybe..
few other things but thats whats left. decent amount of work to say the least but i have it playing for now therefore im happy


I will keep you guys posted as I go from here

pickup1
08-06-2013, 07:55 AM
Any new pics?

04murdalanche
08-06-2013, 08:01 AM
Any new pics?

I'm not gonna lie I've been lazy as **** decided to actually enjoy my time off and just relax. But I'm leaving back for school this Sunday so my time to work on this will be greatly reduced, however I will still make small bits of progress here and there. I'm gonna start cleaning everything up tomorrow. Taking out the nightshades and getting it presentable while I just have the one SP4..

---------- Post added at 06:01 AM ---------- Previous post was at 06:00 AM ----------

Around Christmas time this will be done I'm guessing. And it will be very, very nice

04murdalanche
08-07-2013, 10:05 PM
sp4s will be here friday... will post pics along with a cleaned up interior then.. stay tuned.

04murdalanche
08-10-2013, 04:21 AM
got the single SP4 in for now while i recone the other. sounds ****, hits dem lows like crazy... just one is still flexing my roof, very pleased and happy with the output. demo-d for about 30 straight mins today while wired at 2 ohm, went and felt the dustcap, it was hardly warm.. so that coil was probably still ice cold. needless to say, i think im gonna love these subs.


pics coming in a bit

04murdalanche
08-10-2013, 06:53 AM
washed this bish today.. getting ready to go back to school:(

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zpsca4157e9.jpg (http://s261.photobucket.com/user/hhawksqb1/media/null_zpsca4157e9.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps7778184d.jpg (http://s261.photobucket.com/user/hhawksqb1/media/null_zps7778184d.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps5d591912.jpg (http://s261.photobucket.com/user/hhawksqb1/media/null_zps5d591912.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps81062402.jpg (http://s261.photobucket.com/user/hhawksqb1/media/null_zps81062402.jpg.html)


got a few things left to do, get a black smoothie front bumper, convert the orange lights to white leds, few other things.. etc. also got the SP4 in and it moved a *** ton of air...

fully loaded, carbon caps with cool blue Fi logos on the caps

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zpsae693357.jpg (http://s261.photobucket.com/user/hhawksqb1/media/null_zpsae693357.jpg.html)

dat 4 inch coil:nod:

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps40a5de0c.jpg (http://s261.photobucket.com/user/hhawksqb1/media/null_zps40a5de0c.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps2a388e26.jpg (http://s261.photobucket.com/user/hhawksqb1/media/null_zps2a388e26.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps446eeb8b.jpg (http://s261.photobucket.com/user/hhawksqb1/media/null_zps446eeb8b.jpg.html)

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zpsc1f95b7a.jpg (http://s261.photobucket.com/user/hhawksqb1/media/null_zpsc1f95b7a.jpg.html)

RidnClean
08-10-2013, 08:14 AM
I was happy with my stock wheels til now....

04murdalanche
08-10-2013, 11:29 AM
I was happy with my stock wheels til now....

Loll I love em, only thing that ***** is the offset which makes me not be able to turn all the way to lock but its close enough..

I want these though, the 07+ GMC Sierra factory 20s, here's what they look like on our truck

https://www.google.com/search?um=1&client=safari&hl=en&biw=1024&bih=644&tbm=isch&sa=1&ei=W00GUtfRNMfP2wWI8oHgAw&q=gmc+20s+obs+tahoe&oq=gmc+20s+obs+tahoe&gs_l=img.3...11521.13743.0.13921.10.9.0.1.1.0.225. 956.3j4j1.8.0....0...1c.1.24.img..8.2.233.lJsHPG0e kjY#biv=i%7C0%3Bd%7CDtQbJPwDpdhNKM%3A

drummer4261900
08-21-2013, 08:43 PM
good stuff!!