View Full Version : Box design for BMW E46/330 with single DAYTON HO 10 dual 4 ohm sub

05-30-2013, 08:01 PM
I am looking for a box design for this sub. I have been working on a design, but I don't have a lot of free time these days...:(

Unfortunately it will take a lot of port area to make the desired tuning...

The box will be installed in the left rear tray area or under the packing shelf where the current factory 'subwoofers' are installed.

Looking for a design with a slot port or possibly multiple round or slot ports. I may go sealed if it will be too much of a hassle....These subs prefer vented from what I've found over at DIYMA.

Desired tuning is 30hz. The sub likes to operate in .7CF sealed or vented boxes tuned to 30hz.
Here are the T/S parameters:

Thank you!

05-30-2013, 08:08 PM
Like this :)


05-30-2013, 08:41 PM
Exactly, just don't have $660 bones to spend on it ;)

05-30-2013, 08:46 PM
If you call Halston he will sell you one raw without the woofer. Just the enclosure.

double 07 Makes excellent enclosures and I'm sure he could assist you with making something custom that hangs from the rear deck like the BSW one and works well with your Dayton woofer