PDA

View Full Version : Dual 15" SP4 Silverado SS Build



Silverado SS
05-29-2013, 01:36 AM
PICS on page 2, more to come!

Well I have been gathering up my equipment for a while and finally got everything ready.
2 FI SP4 15s D.7 Every option (Spaced Spider and Cooling)
Power bass XTA 5k
Morel Maximo Components
Pioneer TS 3.5 coaxils
MB Quart 125.4
Clarion CZ702
300 Amp Tenney ALT but may return and change to singer or DC
0 Gauge Big 3 Kit
American bass and Sky high 0 guage runs
Knu Concepts 4 guage 4 channel amp kit and 12 guage Speaker wire and 8 gauge OFC Sub wire
140 A/H Max rate battery

The box will be designed by Star Mountain or Buck and built by myself, I have about 11 cubic feet. I am doing a single seat rear so I can fit 3 people in the truck. Only goals for this setup is a 150 and 60% SPL and 40% SQ. Will get pics tomorrow. Cant wait to finish this and Bang the block! :yumyum:

Jes 42
05-29-2013, 02:28 AM
In for vids...

Silverado SS
05-29-2013, 02:36 AM
In for vids...

Will do, should be about 1-2 weeks hopefully. Pics tomorrow

garretttt4
05-29-2013, 02:45 AM
Gunna be sick.

sbarber82
05-29-2013, 02:46 AM
good luck trying to return your Tenney alt. He is officially out of business and will not be refunding anyone.. We have been dooped

Silverado SS
05-29-2013, 02:54 AM
good luck trying to return your Tenney alt. He is officially out of business and will not be refunding anyone.. We have been dooped

How corn. Its not even the right plug so I'm sort of at a loss. Hmmmm what to do now, Sell it? Would you guys think i should tune too? Im thinking 33-34 hz. I listen to all music types but 50% is rap or R&B, yeah i bump usher learn about it!

black05alti
05-29-2013, 07:21 AM
can't wait to see some pics. tuned anywhere from 32-34hz should be good.

reible82nd
05-29-2013, 12:03 PM
Wow, that's one hell of a set up man! I'm tuned in for pics/vids...

raptor727
05-29-2013, 12:39 PM
Should get nasty got to love sp4's loud, low, and sound great! Tuned in for vids also

Silverado SS
05-29-2013, 12:59 PM
Pics tonight or tomorrow guys

Silverado SS
05-29-2013, 10:31 PM
Pics will be tomorrow sorry bass heads

black05alti
05-29-2013, 10:44 PM
i'll be waiting lol

Silverado SS
05-29-2013, 10:53 PM
i'll be waiting lol

I have been waiting for 2 months or more to get this together and installed so im super pumped, this is my first big build

Jes 42
05-29-2013, 10:58 PM
:coolpics: lol..

Silverado SS
06-01-2013, 11:26 PM
Got the clarion in today, will actually do pics tomorrow just have been busy

CaddieJapan
06-01-2013, 11:42 PM
This should beat pretty hard. Tuned in.............

Silverado SS
06-02-2013, 12:31 AM
This should beat pretty hard. Tuned in.............

Yeah its gonna be wild for me. I'm more of a SQ guy. Had 2 W6s and so on, so this will be a complete 180

04murdalanche
06-02-2013, 10:15 AM
You're gonna **** when you hear those SP4s, but yeah I'd sell that Tenney.. Not good at all, get a Mechman or DC, EA, even Iraggi, HELL ANYTHING but tenney

oxsign
06-02-2013, 12:25 PM
Ok I'm gonna play "devils advocate" here. I know I've read all the bad stuff about Tenny, but I've also heard (and seen) some that actually worked. You have it already, use it. Your definitely not gonna get your money back out of it whether you sell it now or after you install it and try it. You have no clue whether you got a good one or bad one. If its a bad one and you sell it that wouldn't be a good thing either.

Sorry to "dump" on your thread. I've been following it, and its looking great so far.

dbeez
06-02-2013, 12:28 PM
Ok I'm gonna play "devils advocate" here. I know I've read all the bad stuff about Tenny, but I've also heard (and seen) some that actually worked. You have it already, use it. Your definitely not gonna get your money back out of it whether you sell it now or after you install it and try it. You have no clue whether you got a good one or bad one. If its a bad one and you sell it that wouldn't be a good thing either.

Sorry to "dump" on your thread. I've been following it, and its looking great so far.
He said earlier in this thread the alt has the wrong plug for his vehicle.

-BenBen-
06-02-2013, 12:55 PM
Sp4 is my fav sub, but they now have a team fi sub which is the big brother to the sp4..4k rms. also i hope you have better luck then me. my spiders caught on fire and my whole sub burned due to a lead shortage and fi blamed it on user error which is was not.. coil was perfect, only the spiderand leads burned up.. but i love what they did when it worked. would like a new one over my hdc4 15

04murdalanche
06-02-2013, 01:07 PM
He said earlier in this thread the alt has the wrong plug for his vehicle.

This.. All that alt is worth anything too someone is for a multiple alt set up where it can be controlled by a VCM

CaddieJapan
06-02-2013, 07:34 PM
Sp4 is my fav sub, but they now have a team fi sub which is the big brother to the sp4..4k rms. also i hope you have better luck then me. my spiders caught on fire and my whole sub burned due to a lead shortage and fi blamed it on user error which is was not.. coil was perfect, only the spiderand leads burned up.. but i love what they did when it worked. would like a new one over my hdc4 15

I like the SP4 also, but chose to go with Tantric HDD 18s instead. Anyway I too have a friend out here in Japan with 4 Sp4 15's and the exact same thing happened. He had one catch on fire, but just bought a new one and ran with it. Not sure if they can be reconed or not, surely they should be able to though. Sucker was smoking pretty good too.

Silverado SS
06-02-2013, 07:46 PM
All the interest in the thread is surprising so now I gotta get pics tonight. As far as the alt I'm selling because yes I already sent it back to them and they sent me the wrong plug twice but I do have a "special truck" I guess. But Mylows is working with PayPal now to see what he can do about refunds or partial refunds. I actually want to buy KNU Concepts ALT because there local to me and a good company. I never heard of the SP4 catching on fire I sure as hell hope it doesn't happen to me.

Silverado SS
06-03-2013, 01:31 AM
265428042654280726542808some pics

serjr711.
06-03-2013, 01:35 AM
Nice truck bro, now let's see some build pics.:yumyum:

Silverado SS
06-03-2013, 01:42 AM
26542824265428222654282126542823265428172654281826 542819

Silverado SS
06-03-2013, 01:48 AM
Nice truck bro, now let's see some build pics.:yumyum:

thanks, no pics of Morels and a couple other things but ill get them upon installation. Should be done in 2 weeks! hopefully:thumbsup:

Jes 42
06-03-2013, 01:58 AM
Nice pics..In for vids now :cool:

Silverado SS
06-03-2013, 02:12 AM
Nice pics..In for vids now :cool:

Just never happy

Silverado SS
06-17-2013, 12:01 AM
Sent the alt back to Jim so I guess I play the waiting game now

black05alti
06-17-2013, 02:46 AM
Sent the alt back to Jim so I guess I play the waiting game now

Good luck lol. Can't wait for some progress on this

Jes 42
06-17-2013, 02:48 AM
Sent the alt back to Jim so I guess I play the waiting game now
Good luck SS..I know you been wanting to get this together.

Silverado SS
06-17-2013, 03:08 AM
Well he told me it didn't do rated so I'm waiting on a refund or something from him and then I can wrap this up. This weekend I should be throwing everything in except box and have all wires ready to be hooked up when I get the alt. Also has a WTB thread for a HO alt if anyone has one

dbeez
06-17-2013, 10:21 AM
I might sell my dc power sp270

Silverado SS
06-17-2013, 09:39 PM
I might sell my dc power sp270

Let me know asap bud. I want to buy by the end of the week

dbeez
06-17-2013, 09:49 PM
That singer 275 will be cheaper.

Silverado SS
06-17-2013, 10:04 PM
That singer 275 will be cheaper.

It has to be recased so maybe not. PM me a price

dbeez
06-18-2013, 07:20 AM
The ad244 or whatever the number is should bolt right up to the 5.3

Silverado SS
06-18-2013, 11:04 AM
The ad244 or whatever the number is should bolt right up to the 5.3

I have a 6.0 LQ9 its a 3 prong so I have to swap plugs on any alt I get more than likely

dbeez
06-18-2013, 11:08 AM
I have a 6.0 LQ9 its a 3 prong so I have to swap plugs on any alt I get more than likely

5.3 and 6.0 should use the exact same plug.

Silverado SS
06-18-2013, 01:09 PM
5.3 and 6.0 should use the exact same plug.

For the HD trucks with the 6.0 LQ4 this is correct but not the SS trucks

dbeez
06-18-2013, 02:21 PM
Well that's ******

Silverado SS
06-18-2013, 02:25 PM
Well that's ******

Yeah also Mylows is really helping me out and offered me a good deal on a new 275 singer alt so I might have to do that

black05alti
06-18-2013, 02:26 PM
Yeah also Mylows is really helping me out and offered me a good deal on a new 275 singer alt so I might have to do that

Hop on that bro

Silverado SS
06-18-2013, 02:30 PM
Hop on that bro

Its very tempting. That lifetime warranty is awesome and Mike is a great guy and semi local

black05alti
06-18-2013, 02:31 PM
Its very tempting. That lifetime warranty is awesome and Mike is a great guy and semi local

Hell yeah. I plan on getting a 270a Singer alt, but singer seemed to have ignored my last 2 emails for a price quote... Hopefully he's just extra busy right now and this isn't how it usually is.

Silverado SS
06-18-2013, 02:34 PM
Hell yeah. I plan on getting a 270a Singer alt, but singer seemed to have ignored my last 2 emails for a price quote... Hopefully he's just extra busy right now and this isn't how it usually is.

Try calling. Honestly the only company to respond to my emails was DC power. Emailed many others including AE, and Mechman

black05alti
06-18-2013, 02:39 PM
Try calling. Honestly the only company to respond to my emails was DC power. Emailed many others including AE, and Mechman

I will if he doesn't respond within a few days. Excessive amperage didn't answer my calls or emails either, and I've heard a lot of good things about them. I've heard Mechman's CS ***** ***

If all these people keep being a pain to get ahold of them I'll just end up going with the DC 270a

Silverado SS
06-18-2013, 02:45 PM
I will if he doesn't respond within a few days. Excessive amperage didn't answer my calls or emails either, and I've heard a lot of good things about them. I've heard Mechman's CS ***** ***

If all these people keep being a pain to get ahold of them I'll just end up going with the DC 270a

Feel it. Mylows sells singer alts just talk to him.

black05alti
06-18-2013, 02:47 PM
Feel it. Mylows sells singer alts just talk to him.

Will do

dbeez
06-20-2013, 12:35 PM
Feel it. Mylows sells singer alts just talk to him.

Pm's have been cleared.

Silverado SS
06-20-2013, 04:43 PM
Update getting a 275 singer alt.

Silverado SS
06-22-2013, 05:57 PM
Update: Mike from Singer alts is hooking me up with free powder coat job will be installed tomorrow pics will be up!!

Silverado SS
06-22-2013, 06:00 PM
Also a HUGE thank you has to go out to @Mylows 10; he really stepped up after Tenney **** on us and helped me out with Singer, as always he's a great guy

Silverado SS
06-26-2013, 01:41 AM
Box should be done this weekend doing 3.7 per sub tuned to 32-33hz with 4 4" aero ports how's that sound fellas

jar1zx
06-26-2013, 02:00 AM
Also a HUGE thank you has to go out to @Mylows 10; he really stepped up after Tenney **** on us and helped me out with Singer, as always he's a great guy

Tell us how the singer does. I went with DC and I got a amazing alt and dual alt bracket but had over a month wait on both. But it was worth it. Keep us posted on your alt as I think singer is cheaper than DC

Silverado SS
06-26-2013, 02:16 AM
Tell us how the singer does. I went with DC and I got a amazing alt and dual alt bracket but had over a month wait on both. But it was worth it. Keep us posted on your alt as I think singer is cheaper than DC

Singer is cheaper than DC all day and it looks absolutely beautiful. I will put a vid up after build to show how it does under load. Mike is a great guy and really knows his **** and quality it on point to DC

jar1zx
06-26-2013, 02:21 AM
Sounds like a great alternator post a few pics
This is a pic of my DC in a dirty engine I should have washed. Lol

Silverado SS
06-26-2013, 02:34 AM
Sounds like a great alternator post a few pics
This is a pic of my DC in a dirty engine I should have washed. Lol

Mines powder coated Red:yumyum:
But my favorite part the S on the pulley it looks amazing when it spins and when the truck is off

serjr711.
06-26-2013, 02:45 AM
Get to building already:D

Silverado SS
06-26-2013, 02:54 AM
Get to building already:D

Box will be done this weekend so its coming together slowly but plan is to be done by the 5th

Silverado SS
07-02-2013, 12:34 PM
Delay on box, my original design wasn't good enough. Got 9 cubes total but if I do an L port it would be about 3.8ish each after displacement and port. I can do aero ports but they will be pointed at doors and not at the roof because of length. I got 34x18x22-28 depending on volume needed for the set up. Any suggestions? pro-rabbit ; Buck ; double 07 ; Power bass 5k for power and 32 hz for tuning

Buck
07-02-2013, 04:13 PM
Why do you only have 34 width?

Silverado SS
07-02-2013, 04:37 PM
Why do you only have 34 width?

Doing a single rear seat but 37 would be max with an L port. So this makes it 10.7 before any subtrations

Silverado SS
07-11-2013, 11:38 PM
Update. Doing 2 pairs of comps upfront. CDT audio 61HDs and morel maximos. I know its ****** to mix things up but it will be matching down the line. PS sorry for the slow build 60+ hours a week doesn't leave me with any time

Agoonygoblin
07-20-2013, 02:44 AM
In for vidzzz :tomatofa:

dbeez
07-23-2013, 06:43 AM
Updates?

Silverado SS
08-02-2013, 02:14 AM
Updates?

Upgrading a few items, I'm gonna make a new thread once I install everything or the build up, there's a lot of bs on here

dbeez
09-01-2013, 12:14 PM
Updates like box built?

dbeez
09-04-2013, 01:33 PM
Upgrading a few items, I'm gonna make a new thread once I install everything or the build up, there's a lot of bs on here

Updates.

Silverado SS
09-04-2013, 02:06 PM
Updates.

Box pretty much built just building the false floor/platform it sits on and deciding on how to strap it down. 65+ hours a week between my jobs doesn't allow much work. Couple other little stuff like deadner and I got a apline 9887

dbeez
09-04-2013, 02:24 PM
Awesome can't wait for pics and vids of it playing

Silverado SS
09-04-2013, 11:14 PM
Awesome can't wait for pics and vids of it playing

I'll send you some pics this weekend of the box and the platform, also got a set of digital design B1s to match with my anarchy's that I'm waiting on

Timmy13091
09-04-2013, 11:16 PM
I'll send you some pics this weekend of the box and the platform, also got a set of digital design B1s to match with my anarchy's that I'm waiting on

:bigwave:

04murdalanche
09-04-2013, 11:28 PM
Hey bro my phones dead, ill get the pics of the pods to ya tomorrow. They're basically done should have em out in the next few days as time permits, really busy with football and whatnot. Ill text ya tomorrow about it, they look great though. Will be a now addition to your install.

And your front stage is gonna be the shot, I know cause I already have it! LOL

dbeez
09-14-2013, 08:04 PM
Hey bro my phones dead, ill get the pics of the pods to ya tomorrow. They're basically done should have em out in the next few days as time permits, really busy with football and whatnot. Ill text ya tomorrow about it, they look great though. Will be a now addition to your install.

And your front stage is gonna be the shot, I know cause I already have it! LOL

Phone should be charged now Iets see some pics of these doors.

04murdalanche
09-14-2013, 08:05 PM
Phone should be charged now Iets see some pics of these doors.

I'm almost done with them, finishing them up right now actually

dbeez
09-14-2013, 08:27 PM
I'm almost done with them, finishing them up right now actually

Ok some pics bro.

Silverado SS
09-15-2013, 12:30 AM
Full pics would be nice bro

04murdalanche
09-15-2013, 10:03 AM
http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps62d96ba0.jpg

Spot putty and they are done(: few little pin holes but they are smooth as hell none the less

dbeez
09-15-2013, 10:28 AM
do you jigsaw the hole cutouts?

04murdalanche
09-15-2013, 10:30 AM
do you jigsaw the hole cutouts?

Not usually but I was at school and didn't have my router. Doesn't matter it won't be seen anyways.

dbeez
09-15-2013, 10:33 AM
I was just curious

Silverado SS
09-15-2013, 11:55 AM
Not usually but I was at school and didn't have my router. Doesn't matter it won't be seen anyways.
When will they actually be done, not oh just a little here little there I mean done and shipped bro its been a .month and a half and for 2 weeks you have been saying there basically done

04murdalanche
09-15-2013, 12:28 PM
When will they actually be done, not oh just a little here little there I mean done and shipped bro its been a .month and a half and for 2 weeks you have been saying there basically done

Today.


Or when you send funds. Up to you..

Silverado SS
09-15-2013, 01:04 PM
Today.


Or when you send funds. Up to you..

Ok well once there completely done send pics or post em here

04murdalanche
09-15-2013, 03:08 PM
More pics, gonna do a thread on em tonight when I'm fully done

99% done
http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zpsbeec2950.jpg

Notching out the mdf since the anarchys are technically like 6.91 inches or something like that, I made these rings the way I did because if he rings were bigger, they wouldn't fit onto the grille and clear the dash so I had to cut normal 6.5 rings, and notch them where needed to clear the basket so I can perfectly fit them and have it look nice. It's the little things that make the difference


http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zpsd6b9b0ab.jpg

Silverado SS
09-15-2013, 03:28 PM
Looking fine

Silverado SS
09-16-2013, 05:24 PM
More pics, gonna do a thread on em tonight when I'm fully done

99% done
http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zpsbeec2950.jpg

Notching out the mdf since the anarchys are technically like 6.91 inches or something like that, I made these rings the way I did because if he rings were bigger, they wouldn't fit onto the grille and clear the dash so I had to cut normal 6.5 rings, and notch them where needed to clear the basket so I can perfectly fit them and have it look nice. It's the little things that make the difference


http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zpsd6b9b0ab.jpg

Done? Pics

04murdalanche
09-18-2013, 01:35 PM
Hit me up, been textin you mayne

Silver-N-Black
09-18-2013, 01:53 PM
Done? Pics


Are we done with them? why didn't you have them mounted from the back?
They would have looked clean.
http://i1185.photobucket.com/albums/z347/gruiz11/467F8EB5-D3BD-4C44-B505-E34441F0292A-5188-0000065F47534BBB_zpsebaf9eb9.jpg (http://s1185.photobucket.com/user/gruiz11/media/467F8EB5-D3BD-4C44-B505-E34441F0292A-5188-0000065F47534BBB_zpsebaf9eb9.jpg.html)

04murdalanche
09-18-2013, 01:54 PM
Are we done with them? why didn't you have them mounted from the back?
They would have looked clean.
http://i1185.photobucket.com/albums/z347/gruiz11/467F8EB5-D3BD-4C44-B505-E34441F0292A-5188-0000065F47534BBB_zpsebaf9eb9.jpg (http://s1185.photobucket.com/user/gruiz11/media/467F8EB5-D3BD-4C44-B505-E34441F0292A-5188-0000065F47534BBB_zpsebaf9eb9.jpg.html)

Ever seen a pair of exodus anarchys? LOL, Op doesn't really want to cut his door skin, they wouldn't clear if I mounted from the rear. They barely clear as it is. These are almost 4 " deep

Silverado SS
09-18-2013, 02:52 PM
Ever seen a pair of exodus anarchys? LOL, Op doesn't really want to cut his door skin, they wouldn't clear if I mounted from the rear. They barely clear as it is. These are almost 4 " deep

Are they done?

Silverado SS
09-18-2013, 02:52 PM
Ever seen a pair of exodus anarchys? LOL, Op doesn't really want to cut his door skin, they wouldn't clear if I mounted from the rear. They barely clear as it is. These are almost 4 " deep

Are they done?

Silver-N-Black
09-18-2013, 03:10 PM
Ever seen a pair of exodus anarchys? LOL, Op doesn't really want to cut his door skin, they wouldn't clear if I mounted from the rear. They barely clear as it is. These are almost 4 " deep

Sorry, should have read what type of speaker you were running. Yeah those Anarchys are no joke. Was thinking of running 4 of them but just going to keep my mmats for now. Better question are they done yet??

Jes 42
09-18-2013, 03:23 PM
Are they done?

This ^^^

DB-Audio
09-18-2013, 08:05 PM
Looks good so far in for vids

03F150MrSBF
09-19-2013, 04:10 PM
:confused:

04murdalanche
09-19-2013, 04:17 PM
:confused:

Haven't heard from em. That's what I'm waiting on.

Silverado SS
09-19-2013, 10:10 PM
Haven't heard from em. That's what I'm waiting on.

I asked twice if there done? So did 3 other people

---------- Post added at 10:09 PM ---------- Previous post was at 10:09 PM ----------


Haven't heard from em. That's what I'm waiting on.

I asked twice if there done? So did 3 other people

---------- Post added at 10:10 PM ---------- Previous post was at 10:09 PM ----------


Haven't heard from em. That's what I'm waiting on.

I asked twice if there done? So did 3 other people

Silverado SS
09-19-2013, 10:24 PM
Never got any text or forms of contact either

dbeez
09-22-2013, 09:02 AM
Never got any text or forms of contact either

Wtf

Silverado SS
09-22-2013, 09:39 PM
04murdalanche ; said they are done should have posted pics yesterday so.... Jeff back up your words for once man I have given you a lot of time and you said they were basically done weeks ago what's the hold up? Jeff I'm not putting it on you but you got 10 days to get em to me or I'm out. 10 days is more than fair with shipping for what you said is done.

04murdalanche
09-22-2013, 09:42 PM
04murdalanche ; said they are done should have posted pics yesterday so.... Jeff back up your words for once man I have given you a lot of time and you said they were basically done weeks ago what's the hold up? Jeff I'm not putting it on you but you got 10 days to get em to me or I'm out. 10 days is more than fair with shipping for what you said is done.

Or you could just text me. But alright. Pics will be posted tomorrow, send money and they will be shipped accordingly.


Thanks....

Jes 42
09-23-2013, 03:50 AM
:banghead:

ThatChevyGuy
09-23-2013, 03:53 AM
Interested to see this 3rd seat design. I wanted to go big but im almost always 3 deep.

Silverado SS
09-23-2013, 04:16 AM
Interested to see this 3rd seat design. I wanted to go big but im almost always 3 deep.

The seat will be about 18" wide which isn't too small its just a seat to hold the 12 pack or some one needing a ride. I will meter it in the back seat for shits and giggle, your head would be like 8" from the port.

Silverado SS
09-23-2013, 04:31 AM
Or you could just text me. But alright. Pics will be posted tomorrow, send money and they will be shipped accordingly.


Thanks....

You respond faster on here and said you tried contacting me and I didn't get **** so I thought your phone was messing up again.. That's why its on here and again ive had money ready since 1999 just need real pics to see what I'm getting

Silver-N-Black
09-23-2013, 08:24 AM
Can't wait to see the Exodus Anarchys. Give him time, they need to be build right.

What's the plans are you going to wrap them? paint them?

Silverado SS
09-23-2013, 01:36 PM
Can't wait to see the Exodus Anarchys. Give him time, they need to be build right.

What's the plans are you going to wrap them? paint them?

I haven't decided what finish I'm doing yet, they will match my box. Any ideas?

04murdalanche
09-23-2013, 01:38 PM
I haven't decided what finish I'm doing yet, they will match my box. Any ideas?

I'd do black vinyl if I were you mayne. Looks OEM like we originally talked about.

Silver-N-Black
09-23-2013, 03:19 PM
I'd do black vinyl if I were you mayne. Looks OEM like we originally talked about.

If you can get a matching color to the door i'd looked sick.

04murdalanche
09-23-2013, 03:24 PM
Here you go. Pics of the driver, ill take pics of the passenger if you want but it sits just as flush and looks the same. Up to you. Here they are none the less.like I said earlier, the most factory appearance would be to black or dark grey vinyl wrap them.

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps9a749dab.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps39220642.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps406100eb.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zpsa77f5195.jpg

dbeez
09-23-2013, 03:44 PM
Why does it look like the mounting holes in places are further out than the ring you made for them to mount to prior to glassing

Ronny
09-23-2013, 04:53 PM
Yeah you can see through several mounting holes so there is definitely some space between there. I suppose all that matters is that the rearwave is completely sealed into the pod/door. I suppose in the end if sealed up properly it is solely aesthetics, making things look not so great. Perhaps he's got something planned for that :D.

04murdalanche
09-23-2013, 04:55 PM
It's the angle of the pictures, ill take one from the top if y'all want so you can see that they have plenty of wood to grip into. they fit fine and there is plenty of wood

dbeez
09-23-2013, 05:34 PM
There is a pic straight from the top and you can see through

dbeez
09-23-2013, 06:50 PM
http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zpsa77f5195.jpg[/QUOTE]

That pic right there you can clearly see the 11, 9, and 7 o'clock holes on the speaker on the left are past the ring the ring you made should come to the outer edge flush with outer edge of speaker. For a super clean look. And the holes at the 1, 3 , and 5 o'clock on the right speaker are the same way.

DB-Audio
09-23-2013, 07:40 PM
exactly why you pay half first up front as down payment then go from there :banghead:

Silverado SS
09-23-2013, 11:11 PM
exactly why you pay half first up front as down payment then go from there :banghead:

I have no money into this right now just my stock door grills.

Silverado SS
09-23-2013, 11:13 PM
http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zpsa77f5195.jpg

That pic right there you can clearly see the 11, 9, and 7 o'clock holes on the speaker on the left are past the ring the ring you made should come to the outer edge flush with outer edge of speaker. For a super clean look. And the holes at the 1, 3 , and 5 o'clock on the right speaker are the same way.[/QUOTE]

Dbeez said it, how can I secure something down like that and the speakers are hanging over

04murdalanche
09-23-2013, 11:17 PM
http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zpsa77f5195.jpg

That pic right there you can clearly see the 11, 9, and 7 o'clock holes on the speaker on the left are past the ring the ring you made should come to the outer edge flush with outer edge of speaker. For a super clean look. And the holes at the 1, 3 , and 5 o'clock on the right speaker are the same way.[/QUOTE]

As I have stated multiple times now.. This isn't a 6.5 speaker. 2 6.5s BARELY fit on these grilles. The OP wanted to use the anarchys that I suggested to him, and told him it would be a tight fit from the get go. If i did tje rings any other way the speakers would not fit, and the door would not close, they would not fit properly. i worked with what i had, did my best and once they are installed youll never be able to tell anyways. You make it seem like these look like **** or something.. Once they are wrapped and installed they will look sick. It's not like you've built anything I've seen worth looking at anyways. **** off

04murdalanche
09-23-2013, 11:18 PM
http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zpsa77f5195.jpg

That pic right there you can clearly see the 11, 9, and 7 o'clock holes on the speaker on the left are past the ring the ring you made should come to the outer edge flush with outer edge of speaker. For a super clean look. And the holes at the 1, 3 , and 5 o'clock on the right speaker are the same way.[/QUOTE]


That pic right there you can clearly see the 11, 9, and 7 o'clock holes on the speaker on the left are past the ring the ring you made should come to the outer edge flush with outer edge of speaker. For a super clean look. And the holes at the 1, 3 , and 5 o'clock on the right speaker are the same way.

Dbeez said it, how can I secure something down like that and the speakers are hanging over[/QUOTE]

Like I said, the speaker doesn't hang over the side it's the angle. When you screw them in the screws will be going into wood, they will be grabbing onto wood.

murph
09-23-2013, 11:20 PM
:popcorn:

Jes 42
09-23-2013, 11:24 PM
:popcorn:

X2 :offwall:

04murdalanche
09-23-2013, 11:26 PM
X2 :offwall:

Lulzhow you likin the n2 brah?

Silverado SS
09-23-2013, 11:29 PM
Lulzhow you likin the n2 brah?

Well get a different angle pic then

Jes 42
09-23-2013, 11:39 PM
Lulzhow you likin the n2 brah?
Love it.Nasty lows

dbeez
09-24-2013, 06:06 AM
Tell you what I will await other pics all I will say is I have the exact same doors I have measured and I can frit 2 cdt m6+ per door I am positive they are bigfer thwn those cute anarchys. And not saying they are **** just saying they dont look right to me at all guess when I see them in person I can give my own opinions on them.

RangerDangerV2
09-24-2013, 08:26 AM
settle down ladies.

Silver-N-Black
09-24-2013, 09:36 AM
Here you go. Pics of the driver, ill take pics of the passenger if you want but it sits just as flush and looks the same. Up to you. Here they are none the less.like I said earlier, the most factory appearance would be to black or dark grey vinyl wrap them.

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps9a749dab.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps39220642.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps406100eb.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zpsa77f5195.jpg

How are you going to attached them?

04murdalanche
09-24-2013, 11:26 AM
Love it.Nasty lows

How many cu ft and port?


Tell you what I will await other pics all I will say is I have the exact same doors I have measured and I can frit 2 cdt m6+ per door I am positive they are bigfer thwn those cute anarchys. And not saying they are **** just saying they dont look right to me at all guess when I see them in person I can give my own opinions on them.

Nope, try again buddy. The anarchys are bigger.. Alot bigger. Especially when it comes down to the right amount of space on these grilles.

CDT
Mounting Depth: 3.37" (top mount) Overall Outer Diameter 6.81"

Anarchy
Mounting Depth: 3.70" (top mount) Overall Outer Diameter 6.92"

And sure you're entitled to whatever opinion you want. Can't say I give a **** what it is, but hey, what's it matter to you, right?

Just know when you do yours your rings will be very close to hitting your dash. And the anarchy has a very slim mounting surface around the edge of the speaker, like the SA-8 if your ever messed with one. Those look like some nice speakers though. Cheap too, they sure look like they can take some power as well.


How are you going to attached them?

You know how they are attached, the tabs on the rear. They are folded up, taped up, and out of the way for when I was glassing them. Didn't want resin on them

04murdalanche
09-24-2013, 01:51 PM
Your doors are done, I posted pics... quit talking **** in other threads and pay up.

Silverado SS
09-24-2013, 01:57 PM
Your doors are done, I posted pics... quit talking **** in other threads and pay up.

I'm far from talking **** but can start if you would like and as I asked before get some other pics proving I can mount em correct and not have em hang off

04murdalanche
09-24-2013, 01:58 PM
I'm far from talking **** but can start if you would like and as I asked before get some other pics proving I can mount em correct and not have em hang off

Lol sure buddy. Ill post them when I get out of class

Silverado SS
09-24-2013, 02:01 PM
Lol sure buddy. Ill post them when I get out of class

Coming after the customer isn't a good look on you when I haven't said much its been other people pointing out obvious things

04murdalanche
09-24-2013, 02:02 PM
Coming after the customer isn't a good look on you when I haven't said much its been other people pointing out obvious things

Yep. Ill post the pics, and when you pay ill ship. Simple as that. Don't really care what anyone else says about what I do. Don't act like your not talking **** in other threads dude, spare me... I'm not retarded

12voltz+-
09-24-2013, 02:07 PM
hope all works out man if not you got my number

Silver-N-Black
09-24-2013, 02:16 PM
How many cu ft and port?



Nope, try again buddy. The anarchys are bigger.. Alot bigger. Especially when it comes down to the right amount of space on these grilles.

CDT
Mounting Depth: 3.37" (top mount) Overall Outer Diameter 6.81"

Anarchy
Mounting Depth: 3.70" (top mount) Overall Outer Diameter 6.92"

And sure you're entitled to whatever opinion you want. Can't say I give a **** what it is, but hey, what's it matter to you, right?

Just know when you do yours your rings will be very close to hitting your dash. And the anarchy has a very slim mounting surface around the edge of the speaker, like the SA-8 if your ever messed with one. Those look like some nice speakers though. Cheap too, they sure look like they can take some power as well.



You know how they are attached, the tabs on the rear. They are folded up, taped up, and out of the way for when I was glassing them. Didn't want resin on them

Bro i'm asking do to the weight, I thought these would weight more than the stander 6.5 minds. That's just my guess.

Silverado SS
09-24-2013, 02:18 PM
Yep. Ill post the pics, and when you pay ill ship. Simple as that. Don't really care what anyone else says about what I do. Don't act like your not talking **** in other threads dude, spare me... I'm not retarded

I said still waiting in one and made a post about Timmy's doors in which I don't even have to say anything about em. Never said your retarded did Igive up on you and back out from what iI saw? Na I stayed with you so watch your mouth I've been more than fair in this deal

Silverado SS
09-24-2013, 02:20 PM
hope all works out man if not you got my number

Yeah I'm sure we can do something

04murdalanche
09-24-2013, 02:20 PM
Bro i'm asking do to the weight, I thought these would weight more than the stander 6.5 minds. That's just my guess.

They weigh in at just under 7 pounds a piece

Silverado SS
09-24-2013, 02:21 PM
Bro i'm asking do to the weight, I thought these would weight more than the stander 6.5 minds. That's just my guess.

Also my concern dude jumping on me like Jes 42 ; on a school girl

04murdalanche
09-24-2013, 02:22 PM
I said still waiting in one and made a post about Timmy's doors in which I don't even have to say anything about em. Never said your retarded did Igive up on you and back out from what iI saw? Na I stayed with you so watch your mouth I've been more than fair in this deal

You have no reason to back out.

Ill post the pics and we'll go from there

Silverado SS
09-24-2013, 02:26 PM
You have no reason to back out.

Ill post the pics and we'll go from there

That works

Jes 42
09-24-2013, 03:55 PM
Also my concern dude jumping on me like Jes 42 ; on a school girl

:yumyum: College girls are my weakness :blush:

Timmy13091
09-24-2013, 04:09 PM
:yumyum: College girls are my weakness :blush:

:boink: :boink: :boink: :boink:

Jes 42
09-24-2013, 04:12 PM
PICS on page 2, more to come!

Well I have been gathering up my equipment for a while and finally got everything ready.
2 FI SP4 15s D.7 Every option (Spaced Spider and Cooling)
Power bass XTA 5k
Morel Maximo Components
Pioneer TS 3.5 coaxils
MB Quart 125.4
Clarion CZ702
300 Amp Tenney ALT but may return and change to singer or DC
0 Gauge Big 3 Kit
American bass and Sky high 0 guage runs
Knu Concepts 4 guage 4 channel amp kit and 12 guage Speaker wire and 8 gauge OFC Sub wire
140 A/H Max rate battery

The box will be designed by Star Mountain or Buck and built by myself, I have about 11 cubic feet. I am doing a single seat rear so I can fit 3 people in the truck. Only goals for this setup is a 150 and 60% SPL and 40% SQ. Will get pics tomorrow. Cant wait to finish this and Bang the block! :yumyum:

The stuff that's changed since then^^^^ lol

12voltz+-
09-24-2013, 04:15 PM
:boink: :boink: :boink: :boink:

yes yes agree lols

Silverado SS
09-24-2013, 10:03 PM
The stuff that's changed since then^^^^ lol
Yeah now just need a 8k

Jes 42
09-24-2013, 10:10 PM
Yeah now just need a 8k
:2thumbs:

Silverado SS
10-01-2013, 03:47 PM
04murdalanche ; is posting pics tonight

Silver-N-Black
10-01-2013, 04:25 PM
They weigh in at just under 7 pounds a piece

That's not too bad, i think my mmtas are like 5lbs maybe 4lbs.

jrdnhsnbrg
10-01-2013, 06:09 PM
It seems like everything to do with 04murdalanche ; eventually turns into a shitstorm....

04murdalanche
10-01-2013, 08:27 PM
That's not too bad, i think my mmtas are like 5lbs maybe 4lbs.

I like those mids they look nice, how do they sound?


It seems like everything to do with 04murdalanche ; eventually turns into a shitstorm....

lol I have 40+ positive feedback on here bro. One deal went bad doesn't mean every deal I do will go bad.

Silver-N-Black
10-02-2013, 11:39 AM
[QUOTE=04murdalanche;8482488]I like those mids they look nice, how do they sound?

They sounds really good only reason I was thinking of changing them is to go active. I have a ab vfl350.4 150@4 ohm, i bit too much power to the mid bass I currently have.

Waiting on too see how the Anarchy look on the door pods.

04murdalanche
10-02-2013, 11:42 AM
[QUOTE=04murdalanche;8482488]I like those mids they look nice, how do they sound?

They sounds really good only reason I was thinking of changing them is to go active. I have a ab vfl350.4 150@4 ohm, i bit too much power to the mid bass I currently have.

Waiting on too see how the Anarchy look on the door pods.

How much did they run ya?

**** I thought I uploaded them, post must not of sent through I was on my phone. Pics coming in a few. Only phone pics ill take a lot more with my nice camera and upload them as well later on today

Silver-N-Black
10-02-2013, 11:48 AM
[QUOTE=Silver-N-Black;8482763]

How much did they run ya?

**** I thought I uploaded them, post must not of sent through I was on my phone. Pics coming in a few. Only phone pics ill take a lot more with my nice camera and upload them as well later on today


Paid close to 500 for the 3 way set.

04murdalanche
10-02-2013, 11:59 AM
[QUOTE=04murdalanche;8482767]


Paid close to 500 for the 3 way set.

Were they worth it to ya though? Might do a ESQUE build in another car and I'm looking for a nice 3 way. Sorry for cluttering your thread silverado.

Pics


http://i261.photobucket.com/albums/ii58/hhawksqb1/083A64B3-A1DD-4BA5-8CEC-6C11C487D910-2561-0000022223FF22A5_zps2c6f0a94.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/5403F3A1-2BCE-47AF-994C-D31CF13429CD-2561-0000022242B699BE_zpsa7882c97.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/A5A29F02-221D-486A-80AB-F3907EFF6448-2561-000002223685E41C_zpsa869579c.jpg

Where they look like they aren't flush it's because the anarchys come with a foam "pad" decoupler if you will for lack of a better term. So it looks like they aren't sitting perfectly flat but once screwed in they sit flush. Scared me when I first got mine but they pull into the ring once installed.

Silver-N-Black
10-02-2013, 12:25 PM
Now get them in the doors, they look good so far.

Silver-N-Black
10-02-2013, 12:35 PM
[QUOTE=Silver-N-Black;8482771]

Were they worth it to ya though? Might do a ESQUE build in another car and I'm looking for a nice 3 way. Sorry for cluttering your thread silverado.

yes worth every penny, Just not sure how its going to do to keep up with my sub stage. I wish someone would clutter my build-log.

Silverado SS
10-02-2013, 03:47 PM
BIG UPDATE getting a DD M4a !!! Who wants the powerbass 5k?

gckless
10-02-2013, 05:21 PM
yes worth every penny, Just not sure how its going to do to keep up with my sub stage. I wish someone would clutter my build-log.

"Keep up" is subjective. On regular music? Tuned for SQ or all out bassez? When a lot of people say "keep up" with their substage, they simply mean they can hear it at all when at full tilt. When you tune for SQ or just good daily listening, you're going to turn your substage down. PAC LC-1 is your best friend. My subs are generally sitting at 1/4 on that knob.

Timmy13091
10-02-2013, 06:49 PM
I like those mids they look nice, how do they sound?



lol I have 40+ positive feedback on here bro. One deal went bad doesn't mean every deal I do will go bad.

These aren't even at all ......... and look like **** as well .. But atleast you didn't completely half asss them like mine ..
Guess you pick and choose who you wanna **** over ....

SounDrive
10-02-2013, 07:00 PM
Pics coming tomorrow. I mean the next day. I mean, oops, I'm not even done with your doors yet.

Timmy13091
10-02-2013, 08:05 PM
Pics coming tomorrow. I mean the next day. I mean, oops, I'm not even done with your doors yet.

Bump for shittyy panels

12voltz+-
10-02-2013, 08:40 PM
lolz^^^^^

04murdalanche
10-03-2013, 12:58 AM
BIG UPDATE getting a DD M4a !!! Who wants the powerbass 5k?

Oh sheit. How much for the PB?


"Keep up" is subjective. On regular music? Tuned for SQ or all out bassez? When a lot of people say "keep up" with their substage, they simply mean they can hear it at all when at full tilt. When you tune for SQ or just good daily listening, you're going to turn your substage down. PAC LC-1 is your best friend. My subs are generally sitting at 1/4 on that knob.

Always good to have satisfying loudness without your equipment even trying. Amps staying nice and cool, noice.


These aren't even at all ......... and look like **** as well .. But atleast you didn't completely half asss them like mine ..
Guess you pick and choose who you wanna **** over ....

Lol. You're totally right:rolleyes:

Timmy13091
10-03-2013, 01:29 AM
Oh sheit. How much for the PB?



Always good to have satisfying loudness without your equipment even trying. Amps staying nice and cool, noice.



Lol. You're totally right:rolleyes:

Ya .. I know .. Enjoy your ban on maf u scumbag

04murdalanche
10-03-2013, 01:32 AM
Ya .. I know .. Enjoy your ban on maf u scumbag

When's the last time I logged in over there? Can't remember... Lol

neo_styles
10-03-2013, 01:34 AM
Sarcasm flows like box wine at a redneck wedding ITT

murph
10-03-2013, 01:35 AM
When's the last time I logged in over there? Can't remember... Lol

Apparently some people call perc's.. diddies.

04murdalanche
10-03-2013, 01:39 AM
Sarcasm flows like box wine at a redneck wedding ITT


Apparently some people call perc's.. diddies.

Lulz. You guys crack me up

garychoffmann
10-03-2013, 08:10 AM
Why don't you just refund his money? You obviously jacked his panels up. Be proud of the good work you do, but if you were in over your head or you couldn't make them right. Take your lumps and give his money back. Your actions to this scenario have shown a lot about you. This is how people become jokes, how they get a bad rep. Just man up to the situation, if you don't have the money, make amends somehow.

jrdnhsnbrg
10-03-2013, 03:31 PM
Why don't you just refund his money? You obviously jacked his panels up. Be proud of the good work you do, but if you were in over your head or you couldn't make them right. Take your lumps and give his money back. Your actions to this scenario have shown a lot about you. This is how people become jokes, how they get a bad rep. Just man up to the situation, if you don't have the money, make amends somehow.

Not just his money, the expensive deck and tweeters, too. Supposedly the deck is worth $130 and the tweets $100.

Timmy13091
10-03-2013, 04:02 PM
Not just his money, the expensive deck and tweeters, too. Supposedly the deck is worth $130 and the tweets $100.

This ^ all you have to do is read his posts and you can see what kinda guy he is

jrdnhsnbrg
10-03-2013, 04:06 PM
This ^ all you have to do is read his posts and you can see what kinda guy he is

Yeah I read through your whole fiasco and now Silverado SS's deal and both have ended up in total shitstorms.

04murdalanche
10-03-2013, 04:10 PM
Yeah I read through your whole fiasco and now Silverado SS's deal and both have ended up in total shitstorms.

You two seem to be the only ones who think they don't look good lol.

dbeez
10-03-2013, 04:33 PM
I still see them overhanging

Timmy13091
10-03-2013, 04:48 PM
I still see them overhanging

This ^^ have fun with your bent *** basket on mids from trying to screw them flush
At least he actually got this guy the material to wrap them in tho .. That's more then he usually does

Silverado SS
10-04-2013, 02:17 AM
Yes the panels aren't perfect but I'm trying to wrap up and the build finally. There fine for what I need em to be and if I change my mind I'm sure 12 voltz can help me out on em or make new ones.

Silver-N-Black
10-04-2013, 08:17 AM
Yes the panels aren't perfect but I'm trying to wrap up and the build finally. There fine for what I need em to be and if I change my mind I'm sure 12 voltz can help me out on em or make new ones.

You can get the speaker grills off of ebay for about 40 bucks. Not bad if you wanted to start over.

Post some pix I want to see this mid installed on your doors.

Silverado SS
10-04-2013, 03:48 PM
You can get the speaker grills off of ebay for about 40 bucks. Not bad if you wanted to start over.

Post some pix I want to see this mid installed on your doors.

Can get the grills for like 5-10$ local junkyard. He supposed to ship tomorrow and I will temporarly mount my morels or CDTs because I'm waiting for my anarchies to ship also

03F150MrSBF
10-18-2013, 01:00 AM
Just curious if you ever got your pods?

I seen him posting around Craigslist (http://dallas.craigslist.org/dal/ele/4118198845.html)

Silverado SS
10-18-2013, 01:25 AM
Just curious if you ever got your pods?

I seen him posting around Craigslist (http://dallas.craigslist.org/dal/ele/4118198845.html)

I actually just got them today and they don't look horrible I guess. I'm gonna run the til I decide to glass my own set once I get some practice in. Just got my tool maker inputs today for my M4a so only thing I'm waiting on is my 100' roll of wire and my mids and I'm good to go. Depending on my mids which diyma said I should have by the end of October it should be done real soon

03F150MrSBF
10-18-2013, 01:31 AM
You know we demand pics on here!!!

Silverado SS
10-18-2013, 02:10 AM
You know we demand pics on here!!!

Ha they will be up tomorrow

Silver-N-Black
10-18-2013, 09:08 AM
You know we demand pics on here!!!

Yep really want to see how they look. I love how my mmats look but your mids can take way more power.

Silverado SS
10-19-2013, 12:20 AM
Yep really want to see how they look. I love how my mmats look but your mids can take way more power.

I'll be giving each exodus mid about 115 watts a piece for now sorta want more but we will see how it sounds first and make adjustments

03F150MrSBF
10-19-2013, 12:51 AM
Ha they will be up tomorrow

Today is tomorrow :nutskick: pics!

Silverado SS
10-19-2013, 12:54 AM
Today is tomorrow :nutskick: pics!

It was passed midnight when I said it lol but hold on I may be able to have jes put em up I have no laptop right now

03F150MrSBF
10-19-2013, 01:03 AM
It's passed midnight naoooowwwww:2thumbs:

Silverado SS
10-19-2013, 01:18 AM
It's passed midnight naoooowwwww:2thumbs:

They should be up soon

Silver-N-Black
10-19-2013, 12:46 PM
I'll be giving each exodus mid about 115 watts a piece for now sorta want more but we will see how it sounds first and make adjustments


keep me posted.
WHY NO PIX???

Silverado SS
10-19-2013, 01:15 PM
keep me posted.
WHY NO PIX???

I don't have a way to post them from my phone and don't have my laptop right now. Jes 42 ; said he would post em up

gckless
10-19-2013, 01:23 PM
I'll be giving each exodus mid about 115 watts a piece for now sorta want more but we will see how it sounds first and make adjustments

That's about how much I'm sending to mine, a bit more at certain frequencies. If I go much past that I start to smell coils on midbass-heavy songs. I am crossed at 63Hz. I'm sure I can push more to them if I bump that up to 80Hz.

Silverado SS
10-19-2013, 02:36 PM
That's about how much I'm sending to mine, a bit more at certain frequencies. If I go much past that I start to smell coils on midbass-heavy songs. I am crossed at 63Hz. I'm sure I can push more to them if I bump that up to 80Hz.

That's about where I thought I would cross them, how do they handle 2500+? What amp are you running since you have 8ohms

Jes 42
10-19-2013, 02:47 PM
Here ya go bro..Sorry bout that...
http://i1339.photobucket.com/albums/o717/Jes423/pods/IMG_20131019_010236_zpsb2c31bc6.jpg (http://s1339.photobucket.com/user/Jes423/media/pods/IMG_20131019_010236_zpsb2c31bc6.jpg.html)http://i1339.photobucket.com/albums/o717/Jes423/pods/IMG_20131019_010250_zpsaac6f378.jpg (http://s1339.photobucket.com/user/Jes423/media/pods/IMG_20131019_010250_zpsaac6f378.jpg.html)http://i1339.photobucket.com/albums/o717/Jes423/pods/IMG_20131019_010308_zps46965586.jpg (http://s1339.photobucket.com/user/Jes423/media/pods/IMG_20131019_010308_zps46965586.jpg.html)http://i1339.photobucket.com/albums/o717/Jes423/pods/IMG_20131019_010418_zpsbc54f959.jpg (http://s1339.photobucket.com/user/Jes423/media/pods/IMG_20131019_010418_zpsbc54f959.jpg.html)http://i1339.photobucket.com/albums/o717/Jes423/pods/IMG_20131019_010425_zpsc8facb01.jpg (http://s1339.photobucket.com/user/Jes423/media/pods/IMG_20131019_010425_zpsc8facb01.jpg.html)http://i1339.photobucket.com/albums/o717/Jes423/pods/IMG_20131019_010444_zpsc8c8e8fc.jpg (http://s1339.photobucket.com/user/Jes423/media/pods/IMG_20131019_010444_zpsc8c8e8fc.jpg.html)http://i1339.photobucket.com/albums/o717/Jes423/pods/IMG_20131019_010510_zpsa0bfebf9.jpg (http://s1339.photobucket.com/user/Jes423/media/pods/IMG_20131019_010510_zpsa0bfebf9.jpg.html)

dbeez
10-19-2013, 02:54 PM
How do the mids fit

NASTY08IMPALA
10-19-2013, 02:57 PM
I bet they fit as good as the pods look...not gona be able to secure the anarchys without bendin the hell outa the baskets

Silverado SS
10-19-2013, 03:51 PM
Won't find out how they fit til exodus ships them out, they said I should have them by the end of October but doubt it like every pre order. If the mids don't fit I'll make some new ones or make leveling rings

gckless
10-19-2013, 03:56 PM
That's about where I thought I would cross them, how do they handle 2500+? What amp are you running since you have 8ohms

You mean 2.5kW+ on the substage? I hate the term "keep up", it's extremely subjective. I'm running about 4k to my subs and for any rock or daily listening I turn the subs way down to blend with the front stage, usually they are at about a quarter on my PAC LC-1.

I'm running a Zed Leviathan III for the front stage. I've got quite a bit of power on tap.

Silverado SS
10-19-2013, 04:14 PM
You mean 2.5kW+ on the substage? I hate the term "keep up", it's extremely subjective. I'm running about 4k to my subs and for any rock or daily listening I turn the subs way down to blend with the front stage, usually they are at about a quarter on my PAC LC-1.

I'm running a Zed Leviathan III for the front stage. I've got quite a bit of power on tap.

Do they break up at all 2500hz + the B1 tweets I'm running are good for about 3k and up from what I have heard

gckless
10-19-2013, 07:32 PM
Do they break up at all 2500hz + the B1 tweets I'm running are good for about 3k and up from what I have heard

The FR graphs say they do get pretty nasty above 2.5k. I can't comment on it, I have mine crossed at 2k right now. I did try 2.5kHz and didn't notice anything bad to the ear. But probably nothing a little EQ work won't fix.