PDA

View Full Version : Honda Wheel Bearing ?



infamous_e46
05-27-2013, 03:54 AM
This b!tch hums at speeds over 40 sounds like its coming from the right rear
i jacked it up tonight at work during break and tried wiggling the rear wheels
and they have no play in them so i removed the wheels and drums and spun the hubs
no grinding or wiggling


wtf broz
http://www.d-series.org/forums/attachments/serious-discussion-debate/21155d1248469373-looking-97-ek-hatch-l_67caeb2ef9d04699937496896fdab0a9.jpg

look at that beast 35+mpg

Mitch86
05-27-2013, 07:03 AM
Just run that POS in to a tree.

infamous_e46
05-27-2013, 07:19 AM
Just run that POS in to a tree.

im about to run this d!ck across your face

RARECRX
05-27-2013, 09:10 AM
are the tires cupped? look at the tread pattern to see if there is high/low spots. Is there camber wear? check these things

fasfocus00
05-27-2013, 09:48 AM
when it starts to hum, does it go away when you make a turn in either direction? if it does than it's most definitely your wheel bearing and you'll just need to order a new one. if not than it's probably a tire tread issue that causing the hum, you'll need to replace the tire.

Shroomic
05-27-2013, 10:48 AM
when it starts to hum, does it go away when you make a turn in either direction? if it does than it's most definitely your wheel bearing and you'll just need to order a new one. if not than it's probably a tire tread issue that causing the hum, you'll need to replace the tire.

+1 beat me to it

NIHL8ION
05-27-2013, 02:13 PM
Just because you can not feel play or hear grinding when spinning hubs by hand does not mean they are not bad... I also change them out in pairs whenever I change them, if one side is noisy, odds are the other side will be soon too...

infamous_e46
05-27-2013, 07:23 PM
are the tires cupped? look at the tread pattern to see if there is high/low spots. Is there camber wear? check these things

No camber and nit sure on cupped but I notced when I make a right turn the noise is normal but when I make a left turn it starts doing the wah wah wah or something but yea right turns steady noise left turns it makes a throbbing sound right rear I want to say

I'm guessing when you make a left turn at speed all the weight goes to the right rear

Shroomic
06-01-2013, 07:00 AM
Not sure if you got your answer but yes thats how it works.

infamous_e46
06-01-2013, 08:54 PM
Not sure if you got your answer but yes thats how it works.

ok changed one the big hum is gone now i have a quieter hum from the left side.....so both bearings are done lol fuuuuu

CJL
06-01-2013, 08:56 PM
I also change them out in pairs whenever I change them, if one side is noisy, odds are the other side will be soon too...


ok changed one the big hum is gone now i have a quieter hum from the left side.....so both bearings are done lol fuuuuu

:fyi:

infamous_e46
06-01-2013, 08:58 PM
:fyi:

me and you gon be noisy

:fyi: :cuddle:

Bobfig
06-01-2013, 10:17 PM
looks cute. should fit in the back of my truck!!!

CJL
06-01-2013, 10:25 PM
me and you gon be noisy

:fyi: :cuddle:

:veryhapp: :blush:

dumple
06-01-2013, 10:38 PM
put it in the air grab the coil spring and spin the tire, if one of the bearings is bad you'll feel it.

infamous_e46
06-01-2013, 11:13 PM
looks like something a Mexican would drive

Your mother gums my *****

Shroomic
06-02-2013, 09:01 PM
I hope I never hear a noisy wheel bearing. That'd mean somebody stole my system

inspector3711
06-05-2013, 10:28 AM
My neighbor has one of those. He ran it on a dyno. 450 Bhp. Scared the fudge outta me in it. 60mph and the front tires will break loose. A very fast gokart.