PDA

View Full Version : 15" TC sounds 3hp neo



resko1
05-24-2013, 10:16 PM
Item(s) for Sale:

15" TC Sounds 3hp neo



Item(s) Description/Condition:

3Hp neo motor non-linear
15" TI basket
Quad 1 ohm 8 layer coil wired to d2
2- medium spaced TC spiders dual sewn leads
15" pro5200/ aura 1508 cone (proto) Dont let the cone fool you. Will reach 2.5"-3" peak to peak.

FS-34.32hz
QES-0.443
QMS-7.863
QTS-0.419
VAS-56.15L
MMS-269g
Bl-21.04tm
Le-2.13mH
Re-3.381ohms
xmax- 28mm
xlim-34mm
Pe-2000w
SPL-92.87db

I have a folded horn design for this driver that requires about 7-8cu total box but shows a 148-150db level, 1 meter from the horn mouth on 1500w rms. I have included one pic of the hornresp parameters and one of the hornresp 0.5pi loading response. Should be a 2db cabin gain in car and have a response that extends down about 8 more hz.

For those that dont know what hornresp is its a horn modeling program created by david mcbean and EXCELLENT software, but tricky to use.
New/rebuilt sub. Tested for functionality and TS parameters pulled. Box required is too big for my 300zx.




Price:

300 plus shipping.
Only trades i would consider is for a double din headunit.



Shipping and Miscellaneous Item Information:

Shipping is from 53081. Box will be 18x18x16 and 35#



Item Pictures:
http://i1013.photobucket.com/albums/af252/reskoone/20130418_061353_zpsb9df6021.jpg
http://i1013.photobucket.com/albums/af252/reskoone/20130412_152334_zps6d970421.jpg


(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

hispls
05-24-2013, 10:35 PM
Great price! Worth most of that just for the motor and frame.


Have you ever done a horn build? Any pics? Free bump anyway for a cool sub. GLWS

resko1
05-25-2013, 12:02 AM
Thanks.
Actually ive done a few. Im still yet to see a true horn build in a car. Ive seen some rear loaded designs pwk did but theyre more along the lines of ported/tapered enclosures. I did 2 bins a few months ago for a dj buddy. Used 18" b&w's and it was absurd. He was running the pair off 2000w crown and 6 jbl dual 15's for the mains and actually had to dial the level down to get his mix.
Ive never tried it in car though. I was going to use this sub in a 40hz front loaded horn for db drag street stock but i cant fit a 7-8cu box in my nissan 300zx.

resko1
05-25-2013, 09:51 PM
Bump it up guys