PDA

View Full Version : Box plans for FI BTL 15" on 2400rms in trunk?



TreyE
05-22-2013, 12:30 PM
Hey everyone I was wondering if anyone had any box plans rolling around for a FI BTL 15" sub/port back. Max dimensions are:

17" Height
40" Width
15" Deep

Thanks in advance.

Trey

Shroomic
05-22-2013, 01:06 PM
I have a similar sized box for a hdc315. 4.0 cuft at 35hz. 66.67sq in of port. Double baffle.
Idk what tuning those like but i could change the port length or width to fit it better.
Also sub displacement might be off by a little.

Have you tried designing your own on torres?

TreyE
05-22-2013, 01:38 PM
I have a similar sized box for a hdc315. 4.0 cuft at 35hz. 66.67sq in of port. Double baffle.
Idk what tuning those like but i could change the port length or width to fit it better.
Also sub displacement might be off by a little.

Have you tried designing your own on torres?

Never done it, always had other friends that were able to so Ive never had to mess with it. I can look for a how-to online, program is called Torres? Is there a mac version?

TreyE
05-22-2013, 01:42 PM
Just saw its not for Mac, looks like im back out of luck :(

Could you send me the plans for your box Shroomic?

Shroomic
05-23-2013, 12:45 AM
http://i1141.photobucket.com/albums/n600/Tmartin1475/aqboxwithdim2_zpsce1d8e1c.png

But I just realized you need anything but sub up port up. and the depth is off, I should've read better earlier.

Quick look at torres and i came up with this, maybe someone else can check and make sure it'd be good for an Fi

http://i1141.photobucket.com/albums/n600/Tmartin1475/fibtltorres_zps943889a7.png

mylows10
05-23-2013, 12:57 AM
triple stack motor ?

Silverado SS
05-23-2013, 01:02 AM
triple stack motor ?

You gonna buy it? Lol

mylows10
05-23-2013, 01:04 AM
You gonna buy it? Lol

have one

Oraclem19
05-23-2013, 05:50 AM
mount depth?

NASTY08IMPALA
05-23-2013, 05:58 AM
http://i1141.photobucket.com/albums/n600/Tmartin1475/aqboxwithdim2_zpsce1d8e1c.png

But I just realized you need anything but sub up port up. and the depth is off, I should've read better earlier.


Quick look at torres and i came up with this, maybe someone else can check and make sure it'd be good for an Fi

http://i1141.photobucket.com/albums/n600/Tmartin1475/fibtltorres_zps943889a7.png

Not enough port area

TreyE
05-23-2013, 09:09 AM
Its a 2012 FI BTL N2. Sorry I should have provided that earlier. Its also going in my friends 2003 Pontiac Vibe. How much for a simple design? Everyone Ive asked said with those max dimensions its not gunna be to full potential.


FYI - I am noob when it comes to box design.

mylows10
05-23-2013, 10:11 AM
ask Buck ;

TreyE
05-23-2013, 10:30 AM
ask Buck ;

I have been talking to him through PM's, but I found a very good local builder thats going to do it for me. Thanks everyone for the input. I measured my friends trunk and found the max dimensions are actually 40x20x20 so at least a little more room to work with.

Trey

Buck
05-23-2013, 12:14 PM
You should really let me design it for you man, I know what I'm doing with my Fi's, I've had a few of them and I'm a big fan.

Silverado SS
05-23-2013, 01:27 PM
have one

Didn't know you found one. Are you doing single 15 in the truck now?

mylows10
05-23-2013, 02:30 PM
Didn't know you found one. Are you doing single 15 in the truck now?

going with 2 15's but doing hdd subs ,this ones for sale